Jeanneau NC 9 Owner's Manual - page 52
48/110
STEERING GEAR
The steering is mechanical.
The steering system is provided by the rotation of motor bases.
The direction works only when the engines are running.
STEERING AND TURNS
- The steering only works when the engine is running. It is impossible to make a turn without
using the accelerator.
- To turn, reduce speed, turn the wheel and then accelerate sufficiently to make the turn.
- It stops under the effect of water resistance when the accelerator is released.
- The distance needed for the boat to stop depends on the sailing parameters: speed, sea
conditions, wind direction and force...
MAINTENANCE
- Regularly check:
• The tightness of the steering system components.
- Lubricate all the elements.
Note: Do not hesitate to consult your dealer about system maintenance.
WARNING
- Learn how to judge the necessary distance of deceleration for the vessel to
come to a complete stop.
- The reverse gear is not a brake.
STEERING COMPONENTS
Location: Engine compartment
Set - Hydraulic steering
Tank