Jeanneau SUN FAST 3200 Owner's Manual - page 41
37/102
MAINTENANCE
- Regularly check:
• The tightness of the steering system components..
- Lubricate all the elements.
Maintain the nylon, ertalon or teflon bushes only with WD40.
Note: In case of doubt consult your concessionnaire.
STEERING SYSTEM
It is a twin rudder tiller with a rigid rod drive (access through a hatch inside the cockpit locker).
Maintain the nylon, ertalon or teflon bushes with only a suitable lubricant.
REF
Designation
1
Connecting rod
2
Adjusting stud Connecting rod
3
Rod head
4
Bronze plug
5
Upper bearing - Diameter 350mm
6
Bearing ring - Diameter 35mm
7
Stock arm - aluminium
8
Stock arm - aluminium
9
Rudder Port side
10
Rudder Starboard
11
Tiller - Wooden
12
Rudder
13
Track rod end - Diameter 16mm
14
Rudder stock
15
Arm aluminium
16
Bellows stock seal
17
Balance bush
18
Lower bearing - Diameter 440mm
19
TAKE CARE WHEN FITTING BELLOWS
WARNING
- Learn how to judge the necessary distance of deceleration for the vessel to
come to a complete stop.
- The reverse gear is not a brake.
ADVICE - RECOMMENDATION
Visit the website: www.sunfast3200.com for more details on how to prepare your boat.
5
S
T
E
E
R
IN
G
S
Y
S
T
E
M