Jeanneau SUN ODYSSEY 349 Owner's Manual - page 71
Other manuals for SUN ODYSSEY 349:
Owner's Manual
of
160
- 71 -
Replacing the anodes
- The anodes are fastened with screws and nuts. First, remove the screws and nuts that hold
the anode, then clean the contact surface. Press the new anode to obtain a good electrical
contact.
Propeller anode
- Never cover the anodes in antifoul.
- During the first few weeks that the boat is in the water, check the anodes
and if necessary replace them: they erode very rapidly during this period.
8
AC SYSTEM