1. DL manuals
  2. Jeanneau
  3. Boat
  4. Sun Odyssey 40
  5. User Manual

Jeanneau Sun Odyssey 40 User Manual

Summary of Sun Odyssey 40

  • Page 1

    Index 0 introduction chapter 1 index 0 specifications & warranty chapter 2 index 0 safety chapter 3 index 0 hull chapter 4 index 0 deck chapter 5 index 0 rig & sails chapter 6 index 0 accomodations chapter 7 index 0 plumbing chapter 8 index 0 wiring (drawings at the end of chapter) chapter 9 index 0...

  • Page 3: Intr

    We share a common yearning for the sea. We, at jeanneau as shipbuilders and you, who want to live your infatuation on the seven seas. We are delighted to welcome you among the large family of jeanneau boats owners, with our warm congratulations. This manual is meant to help you enjoy and sail your b...

  • Page 5: Specifications

    3 58 specifications & warranty 1 5.1.3, 5.2, iso 10240 index 1 your boat general terms of warranty.

  • Page 6

    5.1.3, 5.2 iso 10240 index 1 specifications length overall ...................................................................................12,20 m hull length ...........................................................................................11,75 m length on waterline ......................

  • Page 7: Specifications

    4 58 1 index 1 version : ............................................................. Name of boat : ................................................................................. ................................................................................. Owner’s name : ......................

  • Page 9: Warranty

    5 58 1 index 1 article 1 at the moment of delivery of the boat, the parties sign the certificate of delivery supplied by chantiers jeanneau for this purpose ; it is equivalent to an agreement of compliance by the purchaser/user. The acceptance of delivey by the purchaser/user, without any reservatio...

  • Page 11: Warranty

    6 58 1 index 1 • damages resulting from : - changes, modifications, alterations, or repairs (even partial ones) performed by shipyards other than those authorized by the manufacturer, - failure to follow the recommended maintenance procedures stated precisely in the owner ’s manual that was delivere...

  • Page 13: Safety

    7 58 safety 2 5.3, 5.5, 5.6, iso 10240 index 1 bilge stripping emergency tiller safety equipment safety directions concerning the gas stove fight against fire.

  • Page 15: A R N I N G

    8 58 2 index 1 w w a r n i n g a r n i n g check the safety equipments inventory before each trip saf ety the life raft is located in the cockpit locker. Recommendation / life raft the locker shall never be padlocked at sea. The launching procedure is indicated on the raft and should be read careful...

  • Page 16

    5.3.3 d) iso 10240 index 1 gas valve same place for other accomodation versions.

  • Page 17: Saf

    Type: "camping-gaz" (butane, duty pressure: 142 lbs per sq. Inch / 10 kg/cm 2 ) - shut the valves in the system (under the oven) and on the cylinder when the appliances are not in use. Shut immediately all valves in case of hazard, - never leave appliances burning unattended, - ensure that the appli...

  • Page 18

    5.3.3 i) iso 10240 index 1 (it is possible to set them in other places but the extinguishers shall be at least 5 meters from each berth.) an extinguisher or a fire blanket shall be at least 2 meters from each open flame appliance. Extinguisher, minimum capacity 5a/34b need for the sun odyssey 40: 10...

  • Page 19: Saf

    10 58 2 index 1 the extinguisher must be located within easy reach and away from possible fire. The engine compartment includes an aperture to inject the extinguishing agent without opening the normal access hatch. Steps to be taken in case of fire in the engine compartment: - stop the engine, - swi...

  • Page 21: Saf

    11 58 2 index 1 keep the bilge clean and regularly check if there is fuel or gas vapor. For the extinguishers you shall use only compatible spare parts ; they shall have the same information or they shall be equivalent as far as their technical qualities and their heat resistance are concerned. See ...

  • Page 22

    5.3.3 h) iso 10240 index 1 emergency tiller.

  • Page 23: Saf

    58 12 2 index 1 saf ety electrical bilge pump the electrical bilge pump can be energized from the electrical switch board. Emergency bilge pump the manual bilge pump is located in the cockpit. The control arm must be accessible permanently. The emergency tiller is stored inside an aft chest and shou...

  • Page 25: Hull

    13 58 hull 3 5.3, 5.4, 5.5, iso 10240 index 1 gel-coat repair instruction construction hull maintenance dry docking.

  • Page 27: P R E C A

    14 58 3 index 1 your boat is built of grp. Stresses are distributed over the whole bottom surface by means of floors integral with the hull. Pig iron ballast is secured to the hull by means of bolts and back-plates lamina- ted in place. The deck is made of balsa-wood sandwich with hard wood inserts ...

  • Page 28

    5.5.3 i) iso 10240 index 1 dry docking waterline sheer line 1141 mm 1356 mm wetted area: 29 m2 (312 sq.Ft). - (these mesurements are for "light boat").

  • Page 29: Hull

    15 58 3 index 1 (refer to section 10 for launching instruction) an annual application of tinless anti-fouling will spare time-consuming and frequent dry-docking. An epoxy coat is nonetheless recommended. In that respect, we must remind you that sanding or priming before anti-fouling are tantamount t...

  • Page 31: A R N I N G

    Mixing ratio: our products include an accelerator, you just have to add the catalyst (colourless liquid). The usual ratio is 2%. The gel setting-time is about half an hour, curing takes approximately ten hours. Application: - to seal off scratches or blister holes, clean the surface with acetone and...

  • Page 33: Deck

    17 58 deck 4 5.3, 5.4, 5.5, iso 10240 index 1 anchoring sailing mooring deck maintenance steering gear.

  • Page 34

    Deck layout 5.3.1 iso 10240 index 1.

  • Page 35: A N G E R

    18 58 4 index 1 a sufficient number of mooring ropes, of adequate dimensions and suitable for the envi- ronment should be on board. - always manoeuver the boat with the engine, - handle the boat consistent with the current and wind, - protect the boat with suitably-sized fenders, - always keep the r...

  • Page 37: Dec

    As a general rule, the chain should be paid out over at least three times the depth of water. Anchoring: - luff the boat through without way on her, - pay out and keep the chain under control with the windlass brake, when anchored: - release the chain or cable from the cable-lifter, - secure the cha...

  • Page 39: A R N I N G

    Stern anchoring: - stern anchoring should be performed with the engine stopped, - secure the required length of the cable on the mooring cleat, - pay out slowly to avoid damaging the propeller or rudder blade. Recommendations/maintenance after every trip, rinse the windlass and anchor chain with fre...

  • Page 41: Dec

    21 58 4 index 1 use the less cleaner products if possible and do not reject them in the sea. Try to wash your boat on shore. Do not use any solvent or solvent based products.(refer section 3) regularly brush the deck with a degreasing shampoo and fresh water. Equipment - rinse liberally all equipmen...

  • Page 42

    5.3.1 i) iso 10240 index 1 steering gear 1- steering column 2- wire 3- steering wheel 4- quadrant 3 1 2 4.

  • Page 43: Dec

    22 58 4 index 1 check regularly all tightenings. Lubricate all components. Use exclusively wd40 compound on nylon, ertalon or the teflon bushes. Adhere to the manufacturer ’s instructions for the tiller sytem. Dec k steering gear.

  • Page 45: Rig and Sails

    23 58 rig and sails 5 5.3, 5.4, 5.5, iso 10240 index 1 winches sails furlers standing rigging running rigging.

  • Page 46

    Index 1 5 1 2 6 7 4 3 designation nbr type ø (mm) length (m) 1 uppershroud 2 1x19 wire 8 15,400 2 intermediate 2 1x19 wire 7 10,470 3 fore lower shroud 2 1x19 wire 7 5,480 4 aft lower shroud 2 1x19 wire 10 5,540 5 forestay 1 1x19 wire 10 15,630 6 backstay 1 1x19 wire 8 11,000 7 bridle 1 1x19 wire 7 ...

  • Page 47: A N G E R

    24 58 5 index 1 proceed as follows to install or remove the mast on your own: before mast installation: - protect the mast from chafing with the hook and hoist cable, - secure the shrouds and ropes to the mast base with a hitch of sufficient length to guide the mast foot during handling, - protect t...

  • Page 48

    Standard mast 5.3.2 iso 10240 index 1 1- navigation and mooring lights 2- backstay attachment 3- schroud attachment 4- spinnaker chainplate and forestay attchmt. 5- spreader + shroud attachment 6- steaming / deck light 7- spinnaker pole lift sheave 8- spinnaker pole lift exit 9- main halyard exit 10...

  • Page 49: Rig and Sails

    25 58 5 index 1 trimming an agent has proceed to the first adjustments and cable tension. After few trips you will have to do the final adjustment to obtain a correct rectitude in transversal; it is also important to keep the mast rectilinear in longitudinal when sailing. Therefore, it needs compens...

  • Page 50

    4 2 3 10 12 14 16 18 19 1 6 6 5 7 8 9 13 17 15 11 20 24 25 22 22 23 21 index 1 furling mast 5.3.2 iso 10240 1- navigation and mooring lights 2- backstay attachment 3- schroud attachment 4- spinnaker chainplate and forestay attchmt. 5- main furler 6- spreader + shroud attachment 7- steaming / deck li...

  • Page 51: A N G E R

    Maintenance thoroughly check the mast from top to bottom before each trip. - check regularly the rigging for tensioning and the lock-nuts or pins for safetying. The first inspection shall be performed after a few days at sea in various weathers. - secure, lubricate and check the bottlescrews for ten...

  • Page 52

    Running rigging starboard classic mast version furling mast version index 1 rope designation nb type color ø leng th 1 main topping lift 1 braid white/yellow 8 29 m 2 spi pole lift 1 braid wh/green/blk 10 20 m 3 spi halyard 1 fo white/green 12 35 m 4 main foot band 1 braid white/red 10 12 m 5 reef 3...

  • Page 53: Rig and Sails

    Maintenance lubricate the sheaves with silicon: change distorted or dented sheaves. Inspect the shafts in sheaves on mast head, regularly check the jam cleat jaws for condition, inspect the halyards for wear and condition clean the blocks regularly (worn out grease, corrosion spots) and slightly oil...

  • Page 54

    1 2 3 4 5 6 index 1 running rigging backboard rope designation nb type color ø leng th 1 genoa halyard 1 1 fo white/blue 12 35 m 2 main sheet 1 braid wh/red/viol 12 17 m 3 main furling line 1 braid white/black 10 18 m 4 genoa halyard 2 1 fo white/blue 12 35 m 5 main halyard 1 fo white/red 12 35 m cl...

  • Page 55: A R N I N G

    28 58 5 index 1 avoid rope entanglement during winch handling. Don’t leave loose ropes on the winches, instead fasten the ropes around cleats. Adjust the winches on receipt of the boat and rinse the winches regularly. Winches shall rotate freely and need being overhauled as soon as seizing becomes o...

  • Page 56

    1 2 3 rope designation nb type color ø lenght 1 genoa halyard * 1 fo white/blue 12 35 m 2 genoa furling line 1 braid white/yellow 10 18 m 3 genoa sheet 2 braid white/blue 14 15 m * stay on the provided jammer on mast fo: halyard braid index 1 running rigging - genoa.

  • Page 57: Rig and Sails

    Before sailing, hoist the genoa in a lull. -secure the peak and halyard on the swivel-traveller, and the tack on the drum and sheets. - insert the bolt-rope into the feeder. Hoist the halyard taut, but not as strongly as with a sail on a normal stay. - pull the stopper from the cockpit to roll up th...

  • Page 58

    1 3 2 5 4 rope designation nb type color ø lenght 1 spi halyard 1 fo white/green 12 35 m 2 spi pole lift 1 braid wh/green/blk 10 20 m 3 spi sheet 2 fo kevlar white/green 12 22 m white/red 4 spi guy 2 fo kevlar black/green 12 22 m black/red 5 spi downhaul 1 braid wh/viol/green 10 15 m fo: halyard bra...

  • Page 59: Rig and Sails

    30 58 5 index 1 to a large extent, the life of a sail depends on regular maintenance. As soon as the sailing season is over and, preferably, before winter, leave your sails to a sail-maker to obtain efficient maintenance and repairs. Set the sails properly at sea in order to achieve the optimum adap...

  • Page 60

    Index 1 lazy-bag 1- lazy-bag attachment on upper spreaders 2- batten ø 12 3- end of zip 4- opening for reefing lines 1 3 4 2.

  • Page 61: Rig and Sails

    31 58 5 index 1 rig and sails sails stowage/folding avoid storing wet sails to obviate fungus. Fold the sail parallel with the foot, than roll it up to the bag dimensions, protection uv rays are harmful to polyester and nylon. Where the sails remain on the mast, even for 24 hours, they must be prote...

  • Page 63: Accomodations

    32 58 accomodations 6 5.3, 5.4, 5.5, iso 10240 index 1 maintenance fabrics.

  • Page 64

    5.3.1 iso 10240 index 1 3 cabins version , 1 bathroom.

  • Page 65: Accomodations

    Inside: - take advantage of fine weather to raise and ventilate the cushions when you leave your boat, - use blinds to protect the inside of your boat from uv rays, - bred crumps must be systematically eliminated, - ensure that the bilges are cleaned and dry. Inside varnish: - rinse inside varnish w...

  • Page 66

    5.3.1 iso 10240 index 1 3 cabins version , 2 bathrooms.

  • Page 67: Accomodations

    Recommendation mark up each cover and foam cushion on dismantling. - coated or pvc fabrics: use a sponge and soapy water (olive oil soap type). Dab away stains, without rubbing, with a white spirit soaked cloth. 34 58 6 index 1 accomodations p r e c a p r e c a u t i o n u t i o n solvents or solven...

  • Page 68

    Index 1 5.3.1 iso 10240 2 cabins version , 1 bathroom.

  • Page 69: Accomodations

    35 58 6 index 1 - 100% polyester jackard/dralon: if your can’t remove the cloth: clean with a vacuum cleaner, wash with synthetic foam adhering to the manufacturer ’s instructions, if you can remove the fabric: hand wash with a commercial lye at 30°c. In both cases, dry cleaning is possible. Remove ...

  • Page 71: Accomodations

    Recommendations / maintenance the ship-builder has tested and approved a number of biodegradable maintenance and renovating products which protect the material and environment. The relevant data sheets are available at our agents who can obtain the information from our company. 36 58 6 index 1 accom...

  • Page 73: Plumbing

    37 58 plumbing 7 5.3, 5.5, 5.6, iso 10240 index 1 water discharge sanitary appliances operation water tank filling fresh water system gas system.

  • Page 74

    Fresh water 5.3,3 a); 5.3.3 g); 5.3.3 k) iso 10240 index 1 1- tank vent 2- water tank 3- deck filler 4- accumulator tank 5- water pressure unit 6- fresh water filter 7- water tank select valves 8- transom shower 9- electric water heater 10- cold water hose 11- hot water hose 12- bilge pump (see drai...

  • Page 75: Plumbing

    38 58 7 index 1 in order to obviate any handling mistake, never fill the water and fuel tanks at the same times. During filling, avoid handling contaminants near the filling plugs. Open and close the filling plugs with the special spanner. Check the filler plug seals for condition during filling. Th...

  • Page 76

    Index 1 seacocks 5.3,3 a); 5.3.3 g) iso 10240 closed seacock open seacock.

  • Page 77: Plumbing

    (refer to chapter 2 « safety») refit the cap in place on the pressure reduction valve screwed section to avoid corrosion, when changing the cylinder. Change the hose on schedule. Recommendations don’t forget to shut off the gas safety valve and pressure reducing valve when the heater is not in use. ...

  • Page 78

    Drainage and gas 5.3.3 a); 5.3.3 d); 5.3.3 g); 5.3.3 k) iso 10240 1- drainage hose 2- sump 3- shower tub drainage pump 4- seacock with valve 5- sea water intake hose 6- manual bilge pump in cockpit 7- gas cylinder 8- gas circuit valve 9- ice box drainage hose in the bilge 10- heater circuit drainage...

  • Page 79: Plumbing

    40 58 7 index 1 waste water from the sink, wash basins and the closets is discharged by sea chests, fitted with quarter turn valves (when the valve handle is perpendicular with the pipe, the valve is closed, and open when along the pipe centreline). All floors include water courses (limber holes). (...

  • Page 80

    Index 1 bathroom drainage principle 5.3.3 a); 5.3.3 k) iso 10240 1 2 3 1- filter 2- shower tub drainage 3- drainage hose, seacock with valve.

  • Page 81: Plumbing

    41 58 7 index 1 marine closets operation: ensure that the water supply and discharge valves are open before using the appliance. To drain the bowl, set the pump lever to “flush” and actuate the pump. To strip t h e bowl, set the pump lever back to “dry” and actuate the pump. Use exclusively absorbin...

  • Page 83: Wiring

    42 58 wiring 5.3, 5.4, 5.5, 5.6, iso 10240 index 1 mast harness connection electronics battery master switches batteries operation 220v circuit shore power cable 8 drawings & diagrams (end of chapter).

  • Page 84

    Battery master switches 5.3.3 b); 5.5.1 iso 10240 index 1 1- battery master switch: + domestic 2- battery master switch: - 3- battery master switch: + engine 4- windlass circuit breaker 1 2 3 4 same place for other accomodation versions.

  • Page 85: P R E C A

    Electric installation: 12v dc. The circuits can be used simultaneously or separately should the need arise. Turn the master switches on to energize the system. The master switches energize the engine and house electrical systems. The engine driven generator is used to charge the batteries. Use your ...

  • Page 87: A R N I N G

    44 58 8 index 1 the electrical switchboard does not require any routine maintenance. In case an electrical unit should not be energized, check: - the main power supply (batteries, master switches), - the switches and fuses along the line, - the relevant electrical unit. Use the automatic reset switc...

  • Page 89: Wiring

    45 58 8 index 1 wiring connect the harness after installation of the mast. Access to the harness can be gained through the pillar boxing in the forward cabin, after inserting them in the cables outlets in front of the mast step. Special sleeves are available to complement the boat’s equipment (refer...

  • Page 91: Diesel Engine

    46 58 diesel engine 9 5.3, 5.4, 5.5, 5.6, iso 10240 index 1 fuel filter engine fuel tank dash board / control lever propeller anode stuffing box fuel circuit valve.

  • Page 92

    Engine installation index 1 1 15 14 13 12 11 10 8 7 9 6 2 3 4 5 1 - exhaust muffler 2 - engine compartment air intake 3 - engine compartment air exhaust 4 - tank vent 5 - deck filler 6 - tank 7 - fuel circuit valve 8 - first-stage filter 9 - fuel return hose 10 -engine 11 - sea water filter 12 -sea ...

  • Page 93: Diesel Engine

    47 58 9 index 1 diesel engine tank filling comply with the general precautions indicated in chapter 7 for tank filling. To protect the deck from possible fuel splashes, wet up the area around the deck filler with sea water before taking the plug off. In case of splashes, rinse the deck liberally (af...

  • Page 94

    Fuel circuit valve 5.3.3 c); 5.3.3 k); 5.5.1; iso 10240 index 1 same place for other accomodation versions.

  • Page 95: Diesel Engine

    48 58 9 index 1 diesel engine engine running problems may have several causes, amongst which dirty fuel is a major one, and the injection pump will be soon destroyed by water in the fuel. Water results either from the condensation in an insufficiently filled tank, or seeps in through the mislocked f...

  • Page 96

    5.3.2; 5.3.3 k); 5.3.3 l) 5.5.1 iso 10240 index 1 1 - cooling water filter 2 - anti-siphon elbow 3 - seacock with valve, sea water intake i.B. Engine 1 2 3.

  • Page 97: Diesel Engine

    49 58 9 index 1 diesel engine refer to the brochure supplied with the boat. You must read carefully the brochure which includes detailed hints about the engine ope- ration and how to run it properly. Engine sea valve the engine sea valve ensures a critical duty in the engine operation and, therefore...

  • Page 99: Diesel Engine

    50 58 9 index 1 diesel engine engine operation: before starting the engine: - open the fuel valve, - open the engine cooling valve, - actuate the battery master switch to energize the electrical system, - before starting the engine, disengage the reversing gear to acceleratefrom dead stop, - refer t...

  • Page 100

    5.3.2 iso 10240 index 1 stuffing box same place for other accomodation versions.

  • Page 101: Diesel Engine

    51 58 9 index 1 diesel engine lubricate the seal every 200 running hours, or at least once a year with 1cm 3 of lubricant. After launching, discharge the air from the sleeve by pinching with fingers. The propeller supplied with your boat embodies the results of tests carried out jointly with the eng...

  • Page 103: Launching

    52 58 launching 10 5.2, 5.3, 5.4, iso 10240 index 1 launching hints mast installation.

  • Page 105: Launc

    53 58 10 index 1 launc hing w w a r n i n g a r n i n g don’t stay on-board or under the boat during hoisting. Launching hints a lot of skill and care is required to launch your jeanneau boat for the first time, since the satisfactory operation of all equipment will depend on the quality of many lau...

  • Page 107: Launc

    54 58 10 index 1 launc hing after launching: - check the speedometer and lock fittings for tightness, as the case may be. - open and check the valves for sealing with the hull and relevant pipe, - check the stuffing box for sealing (refer to section 8 “stuffing box”), - before starting the engine, r...

  • Page 109: Laying Up and

    55 58 laying up and winter precautions 11 5.3, 5.4, 5.5, iso 10240 index 1 laying up protection & maintenance.

  • Page 111: Winteriz

    56 58 11 index 1 winteriz e there are two winter precautions procedures: take ashore all ship’s documents, loose ropes not used for mooring, galley equipment, stores, clothes, safety equipment, battery. Mark up the safety equipment and check the expire dates; obtain immediate overhaul of the raft (e...

  • Page 113: Winteriz

    57 58 11 index 1 engine: engine winter lay-up shall be performed by a professional organization, and will not be the same if the boat remains afloat or ashore. The following are a few major tasks: afloat: - drain the cooling system and fill up with anti-freeze, -switch off the master switche, lubric...

  • Page 115: Personal Notes

    Jeanneau r ecommend 58 5 8 personal notes 12 the pr esent document is not contractual and constantly desiring to impr ove our models, we r eserve the right to modifiy them wit hout advance notice. Conception et réalisation: f .Lucas- nantes -impr ession numérique : goubault imprimeur nantes. Chantie...