Jeanneau SUN ODYSSEY 44I Owner's Manual - Rigging and Sails
63/134
WINCHES
OPERATION
Avoid rope jamming during winch handling. Do not leave loose ropes on the winches but fasten
them on cleats (except on the ’’Self Tailing’’ winches).
SAIL SETTING
CLASSICAL MAINSAIL
With the mainsail being on the deck:
- Screw the pins of the mast sliders for battens into their boxes.
- Slide in the battens through the leech.
- Screw the box cap until you get the required tension (the tightening screw shall not project beyond
the sail).
- Do not forget the small locking screw.
- Put the mainsail into the lazy-bag.
- Set the boom ring in velcro about level with the clew.
- Fit the mainsail onto its slides, begin with the headboard and finish with the tack.
WARNING
-Refer to the manufacturer's instructions to remove the winches and put them back.
Improper refitting may result in accidents (e.g. kick of the crank handle).
6