Jeanneau Sun odyssey 509 Owner's Manual - page 92
88/162
USE OF THE WASHBASINS AND SHOWERS
- Close the valves and turn off the taps after use.
Waste water from the sink, washbasins and heads is drained off by thru-hull fittings with ball
valves (the valve is closed when the valve handle is perpendicular to the hose, the valve is
open when the valve handle is in line with the hose).
All the floors have holes (limber holes) for the water flow.
A watertight bilge tray under the engine receives the possible oil leaks.
A main sump located above the ballast receives water from the bilges.
.The main sump is partially drained by an electric or a manual pump. Regularly dry the sump
with a sponge.
ADVICE - RECOMMENDATION
- Regularly check the valves and thru-hull seacocks for proper operation and
watertightness.
- Turn off the valves when the water system is not in use.
- Visually check the water pump flow.
- Check the clamps and flexible hose connections for tightness.
- Pay attention to the seals for condition.
- Regularly make sure that the strum box and bilge are perfectly clean.
- Immediately switch off the electric system in case a pump is running while all the water
supplies are turned off.
- In case of a leak check the system.
Galley draining + Cool box
Saloon seating Starboard
Washbasin draining
Head version - Port aft
Washbasin draining
Head version - Port forward