JedMark Ltl 5210 User Manual - Advanced Settings
Advanced Settings
- 8 -
ADVANCED SETTINGS
to meet your requirements. Please make sure the camera is in the test mode.
3.1 Parameter Settings
Press “MENU” key to enter/exit the menu. Press
,
to move the marker,
,
to
change the setting, and
to confirm the change. Always remember to press
to save
the change. Otherwise you will lose your new setting.
Parameter Settings
(Bold = default)
Description
Mode
Camera,
Video,
Camera+Video
(Ltl-5210A only)
Select whether still photos or video clips
are taken. In Camera+Video mode,
Ltl-5210A can first take photos and then
shoot videos afterward.
Format Enter
All files will be deleted after formatting
the SD card. Highly recommend you
format the SD card if it has been used
previously in other devices. Caution:
make sure wanted files on the SD card
have been backed up first!
Photo Size (affects still
photos only)
3MP, 5MP,
(12MP on Ltl-5210A
only)
Select desired resolution for still photos
from 3 to 12 megapixels. Higher
resolution produces better quality
photos, but creates larger files that take
more of the SD card capacity. Besides,
larger files require longer time to write
to the SD card, which will slightly slow
the shutter speed. 5MP is recommended.
Video Size (affects
video clips only)
640×480,
320×240
Select video resolution (pixels per
frame). Higher resolution produces
better quality videos, but creates larger
files that take more of the SD card
capacity. 640× 480 is VGA mode in
standard 4:3 format.
Set Clock
Enter
Press Enter to set up date and time.
Picture No. (affects
still photos only)
01 Photo, 02 Photos,
03 Photos
Select the number of photos taken in
sequence per trigger in Camera mode.
Please also refer to the Interval
parameter.
The Ltl trail camera comes with preset manufacturer settings. You can change the settings
http://www.jedmark.co.uk