1. DL manuals
  2. Jeep
  3. Automobile Accessories
  4. 1181323
  5. Installation Instructions Manual

Jeep 1181323 Installation Instructions Manual

Summary of 1181323

  • Page 1

    Installation instructions for 50-0283x-017 series 1181323 50-0283x-018 series 1181328 50-0283x-019 series 1181325 jeep grand cherokee video cassette player housing these instructions are intended for use only by experienced professionals in the automotive customizing business. Special tools and equi...

  • Page 2

    2 item description qty 1 screw, # 8 x 3/4" pph 4 1 2 well nut, 10-32 2 2 3 screw, 10-32 x 1" pph 2 3 4 washer, # 10 2 5 screw, # 10 x 1/2" hwh 4 4 6 screw, # 8 x 9/16" pwh 8 5 7 cd/vcp mounting bracket 1 8 housing mounting brkt. 2 6 9 housing top 1 10 storage pocket 1 11 housing bottom 1 i. Preparat...

  • Page 3

    3 if vechicle is not equipped with a factory 10 disc cd changer, proceed to step 5. 1. Locate the o.E.M. Cd changer housing mounted to the rear passenger side of vehicle. Remove and discard (4) four screws. Remove and discard housing by moving it upward and outward. See figure 1. 2. Disconnect wirin...

  • Page 4

    4 5. Locate the o.E.M. Storage pocket mounted to the rear passenger side of vehicle. Remove and discard pocket by moving it upward and outward. See figure 4. 6. Using a pin router, razor knife, or suitable tool, carefully trim plastic panel as shown to allow clearance for vcp bracket. See figure 5. ...

  • Page 5

    5 8. Route video and audio cables to rear passenger side vcp location. See figure 7. Ii. Preparation of components for installation 9. Remove and discard (2) two screws which secure mounting bracket (item 7 pg. 2) to housing. Insert cd changer (if equipped ) into mounting bracket and secure in origi...

  • Page 6

    6 if vechicle is equipped with a factory 10 disc cd changer, proceed to step 16. 13. Align top holes in vcp mounting bracket (item 7 pg 2) with holes in vehicle. See figure 11. 14. Insert (2) two well nuts (item 2 pg 2) into top holes and secure using (2) 10-32 x 1" screws (item 3 pg 2) and (2) two ...