Jeep 2008 Liberty Installation Instructions Manual - page 6
Other manuals for 2008 Liberty:
Owner's Manual, Owner's Manual
of
6
6 |
P a g e
Use electrical tape to wrap the connection and secure the wires together. A wire tie will help prevent the tape from
unraveling in the future.
Method #3 – “T-Taps”
T-taps are plastic clips that are squeezed onto the wires in the car. The wire from the remote start goes into the tap and
the whole thing is crimped together. T-taps come in different sizes for different size wires. Use yellow t-taps for the
larger wires in your main power harness. Red t-taps are good for the smaller wires. Tape and wire tie the connections
as shown in the “wrap and tape” section above – that will prevent the t-taps from ever opening up.
Copyright 2013 Digitel LLC