- DL manuals
- Jeep
- Automobile
- 2009 COMPASS
- Owner's manual
Jeep 2009 COMPASS Owner's manual - page 433
Speed Control (Cruise Control) . . . . . . . . . . . 131,169
Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Automatic Transmission . . . . . . . . . . . . . . . . . 251
Engine Fails to Start . . . . . . . . . . . . . . . . . . . . 253
Manual Transmission . . . . . . . . . . . . . . . . . . . 251
Starting Procedures . . . . . . . . . . . . . . . . . . . . . . 251
Steering
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 265,266
Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Wheel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Steering Wheel Mounted Sound
System Controls . . . . . . . . . . . . . . . . . . . . . . . . . 235
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147,377
Storage Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Stuck, Freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 340
Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Sun Visor Extension . . . . . . . . . . . . . . . . . . . . . . . 79
Supplemental Restraint System - Airbag . . . . . . . . 48
Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 351
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Taillights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
Temperature Gauge, Engine Coolant
. . . . . . . 168,331
Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 64
Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 19
Theft System (Security Alarm) . . . . . . . . . . . . . . . 19
Tie Down Hooks, Cargo . . . . . . . . . . . . . . . . . . . 153
Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 130
Tire and Loading Information Placard . . . . . . . . . 284
Tire Identification Number (TIN) . . . . . . . . . . . . . 283
Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Tire Safety Information . . . . . . . . . . . . . . . . . . . . 279
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70,288,414
Aging (Life of Tires) . . . . . . . . . . . . . . . . . . . . 294
Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Changing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
INDEX
431
10
Summary of 2009 COMPASS
Page 1
Compass 2009 owner’s manual 2009 comp a s s chrysler llc 81-326-0911 first edition printed in u.S.A..
Page 2
Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution there- fore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability can b...
Page 3: Table Of Contents
Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 understanding the ...
Page 5: Introduction
Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 5 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 7 䡵 vehicle i...
Page 6
Introduction this owner’s manual has been prepared with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a warranty information booklet and various customer-oriented documents. You are urged to read thes...
Page 7
Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annuall...
Page 8
6 introduction.
Page 9
Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in an accident or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...
Page 10
Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 introduction.
Page 11: Contents
Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 12 ▫ ignition key removal . . . . . . . . . . . . . . . . . . 12 ▫ locking doors with the key . . . . . . . . . . . . . 15 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . . 15 䡵 s...
Page 12
▫ remote key unlock, driver door/all first press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 ▫ illuminated approach — if equipped . . . . . . . 22 ▫ to lock the doors and liftgate . . . . . . . . . . . 22 ▫ sound horn with remote key lock . . . . . . . . 22 ▫ flash lights with rem...
Page 13
▫ enhanced driver seat belt reminder system (beltalert 威) . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ▫ seat belt extender . . . . . . . . . . . . . . . . . . . . . 47 ▫ seat belts and pregnant women . . . . . . . . . . . 48 ▫ driver and front passenger supplemental restraint system (srs)...
Page 14
A word about your keys the authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition key removal automatic transmission — if...
Page 15
Note: if you try to remove the key before you place the shift lever in park, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ...
Page 16
Caution! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual transmission 1. Turn the ignition switch to the acc (accessory) position. 2. Push the key and cylinder inward and rotate the key to the loc...
Page 17
Locking doors with the key you can insert the key with either side up. To lock the door, turn the key to the right. To unlock the door, turn the key to the left. Refer to “body lubrication” under “maintenance procedures” in section 7. Key-in-ignition reminder opening the driver’s door when the key i...
Page 18
Sentry key 姞 the sentry key 威 immobilizer system prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses ignition keys that have an embedded ...
Page 19
• exxon/mobil speedpass™, additional sentry keys威, or any other transponder-equipped components on the same key chain will not cause a key-related (transponder) fault unless the additional part is physi- cally held against the ignition key being used when starting the vehicle. Cell phones, pagers, o...
Page 20
Customer key programming if you have two valid sentry keys 威, you can program new sentry keys 威 to the system by performing the following procedure: 1. Cut the additional sentry key 威 transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ign...
Page 21
Note: if a programmed key is lost, see your authorized dealer to have all remaining keys erased from the sys- tem’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of s...
Page 22
3. The vehicle security light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the system is arming. During this period, if a door is opened, the ignition switch is turned on, or the power door locks are unlocked in any manner, the vehicle security alarm wil...
Page 23
Note: the line of transmission must not be blocked with metal objects. To unlock the doors and liftgate press and release the unlock button on the rke transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to ack...
Page 24
2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle by press- ing the lock/unlock buttons on the rke transmitter with the ignition switch in the lock position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting....
Page 25
• for vehicles not equipped with the evic, perform the following steps: 1. Press the lock button on a programmed rke trans- mitter for at least 4 seconds, but no longer than 10 sec- onds. Then, press the panic button while still holding the lock button. 2. Release both buttons at the same time. 3. T...
Page 26
3. Test the feature while outside of the vehicle by press- ing the lock/unlock buttons on the rke transmitter with the ignition switch in the lock position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. Note: pressing the lock button on the rke...
Page 27
2. This device must accept any interference that may be received including interference that may cause undesired operation. Note: changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. If your rke transmitte...
Page 28
2. Remove and replace the batteries. Avoid touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3. To reassemble the rke transmitter case, snap the two halves together. Note: if the rke transmitter is equipped...
Page 29
Warning! (continued) • when leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe per- sonal injuries and death. Caution! A...
Page 30
Automatic door locks — if equipped the doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The auto lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 1...
Page 31
5. Repeat these steps if you want to return this feature to its previous setting. Note: • if you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • use the automatic unlock doors on exit feature in accordance with local laws...
Page 32
Note: • if you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • use the automatic unlock doors on exit feature in accordance with local laws. Automatic unlock doors on exit programming the automatic unlock doors on exit fe...
Page 33
Child-protection door lock system (rear doors) — if equipped insert the tip of the ignition key into the lock and rotate to the lock or unlock position. Child-protection door lock location child-protection door lock function things to know before starting your vehicle 31 2.
Page 34
Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Note: for emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the ...
Page 35
Controls on each passenger door trim panel, which oper- ate the passenger door windows. The window controls will operate when the ignition switch is in the on or acc position. Note: • for vehicles not equipped with the electronic vehicle information center (evic), the power window switches will rema...
Page 36
Window lockout switch the window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window lockout switch. To enable the window con- trols, press the window lockout switch a second time. Liftga...
Page 37
Note: • in the event of a power malfunction, or the rke transmitter is inoperative, insert the key into the liftgate lock cylinder and turn to the right (manual lock models only). Using the liftgate handle, pull the liftgate open with one fluid motion. • although the liftgate has no inside release m...
Page 38
Gas props support the liftgate in the open position. However, because the gas pressure drops with tempera- ture, it may be necessary to assist the props when opening the liftgate in cold weather. Occupant restraints some of the most important safety features in your vehicle are the restraint systems...
Page 39
Ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/shoulder belts all the seats in your vehicle are equipped with lap/ shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or ...
Page 40
Warning! (continued) • wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • two ...
Page 41
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your bel...
Page 42
Warning! (continued) • a belt that is worn under your arm is very danger- ous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over...
Page 43
Warning! • a lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • a twisted belt can’t do its job as well. In a collision i...
Page 44
Adjustable upper shoulder belt anchorage in the front seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best. As a guide, if you are shorter tha...
Page 45
1. Remove the mini-latch and regular latch from its stowed position in the right rear side trim panel. 2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. Mini-latch stowage routing the rear center shoulder belt things ...
Page 46
4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in the seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap. 6. When the belt is long enough to fit, insert the la...
Page 47
7. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 8. Position the shoulder bel...
Page 48
10. To disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. I...
Page 49
Beltalert 威 can be enabled or disabled by your authorized dealer or by following these steps: note: the following steps must occur within the first 60 seconds of the ignition switch being turned to the on or start position. Chrysler llc does not recommend deactivating the enhanced warning system (be...
Page 50
Warning! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Seat belts and pregnant women we r...
Page 51
Note: the front airbags are certified to the federal regulations that allow less forceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity. This vehicle may also be equipped with side ...
Page 52
Note: airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. Warning! • do not put anything on or around the front airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are no longer func...
Page 53
Along with the seat belts, front airbags work with the instrument panel knee impact bolsters to provide im- proved protection for the driver and front passenger. Side curtain airbags also work with seat belts to improve occupant protection. The seat belts are designed to protect you in many types of...
Page 54
5. If a child from 1 to 12 years old must ride in the front passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint (refer to information on child restraint in this section). 6. You should read the instructions provided with your child...
Page 55
Airbag system components the airbag system consists of the following: • occupant restraint controller (orc) • side remote acceleration sensors (if equipped) • airbag warning light • driver airbag • front passenger airbag • supplemental side curtain airbags above side win- dows (if equipped) • steeri...
Page 56
• the orc also turns on the airbag warning light in the instrument panel for six to eight seconds as a self-check when the ignition is first turned on. After the self-check, the airbag warning light will turn off. If the orc detects a malfunction in any part of the system, it turns on the airbag war...
Page 57
• the side impact srs side curtain airbag is designed to activate only in certain side collisions. When the orc (with side impact option) detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generat...
Page 58
However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately. • as the airbags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation....
Page 59
Maintaining your airbag system warning! • modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the stee...
Page 60
Event data recorder (edr) in the event of an accident, your vehicle is designed to record up to five seconds of specific vehicle data param- eters (see list below) in an event data recorder prior to the moment of airbag deployment, or near-deployment, and up to a quarter second of high-speed deceler...
Page 61
Upon request. General data that does not identify par- ticular vehicles or crashes may be released for incorpo- ration in aggregate crash databases, such as those main- tained by the u.S. Government and various states. Data of a potentially sensitive nature, such as would identify a particular drive...
Page 62
• cruise control status • traction/stability control status • tire pressure monitoring system status child restraint everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the united states and all canadian provinces require that small children ride i...
Page 63
Infants and small children there are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to ensure you have the correct seat for your child. Use the restraint that is correct for ...
Page 64
• the belt-positioning booster seat is for children weigh- ing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly. If the child cannot sit with knees bent over the vehicle’s cushion while the child’s back is against the seatback; they should use a belt pos...
Page 65
Here are some tips on getting the most out of your child restraint: • before buying any restraint system, make sure that it has a label certifying that it meets all applicable safety standards. We also recommend that you make sure that you can install the child restraint in the vehicle where you wil...
Page 66
• buckle the child into the seat according to the child restraint manufacturer’s directions. • when your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the o...
Page 67
The vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position. If your child restraints are not latch-compatible, you can only install the child restraints using the vehicle’s seat belts. Please refer to installing the child restraint system for t...
Page 68
Note: when using the latch attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked be...
Page 69
Not all child restraint systems will be installed as we have described here. Again, carefully follow the instruc- tions that come with the child restraint system. Note: if your child restraint seat is not latch com- patible, install the restraint using the vehicle seat belts. Warning! An incorrectly...
Page 70
• if the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. Transporting pets airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about an...
Page 71
Safety tips exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, fol- low these safety tips: do not run the engine in a closed garage or in...
Page 72
Airbag warning light the light should come on and remain on for six to eight seconds as a bulb check when the ignition switch is first turned on. If the led is not lit during starting, have it checked. If the light stays on, flickers, or comes on while driving, have the system checked by an authoriz...
Page 73: Contents
Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 ▫ inside day/night mirror . . . . . . . . . . . . . . . . 75 ▫ automatic dimming inside mirror — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 76 ▫ outside m...
Page 74
䡵 voice recognition system (vr) — if equipped. . . . . . . . . . . . . . . . . . . . . . . . . . . 107 ▫ voice recognition system (vr) operation . . . 107 ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . . 109 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . . 112 䡵 seats . . ....
Page 75
▫ map/reading lights . . . . . . . . . . . . . . . . . . 126 䡵 windshield wipers and washers . . . . . . . . . . 127 ▫ windshield wiper operation . . . . . . . . . . . . 127 ▫ intermittent wiper system . . . . . . . . . . . . . . 128 ▫ windshield washers . . . . . . . . . . . . . . . . . . . 128 ▫ m...
Page 76
▫ closing the sunroof . . . . . . . . . . . . . . . . . . 142 ▫ pinch protect feature . . . . . . . . . . . . . . . . . . 142 ▫ pinch protect override . . . . . . . . . . . . . . . . . 142 ▫ venting sunroof — express . . . . . . . . . . . . . 143 ▫ sunshade operation . . . . . . . . . . . . . . . . ...
Page 77
Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicl...
Page 78
Automatic dimming inside mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activa...
Page 79
Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distan...
Page 80
To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror. Warning! Vehicles an...
Page 81
Vanity mirrors — if equipped to use the vanity mirror, rotate the sun visor down and swing the mirror cover upward. Sun visor sliding feature the sun visors may be extended out to provide more coverage of the side glass. Hands-free communication (uconnect 姞 ) — if equipped note: the sales code rer a...
Page 82
Note: the uconnect 威 system requires a cellular phone equipped with the bluetooth 威 ⬙hands-free profile,⬙ ver- sion 0.96 or higher. See the uconnect 威 website for supported phones. Note: for uconnect 威 customer support, visit the following websites: • www.Chrysler.Com/uconnect • www.Dodge.Com/uconne...
Page 83
Voice recognition button actual button location may vary with the ra- dio. The individual buttons are described in the “operation” section. The uconnect 威 system can be used with any hands-free profile certified bluetooth 威 cellular phone. See the uconnect 威 website for supported phones. If your cel...
Page 84
• for each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand ⬙phonebook new entry,⬙ or you can br...
Page 85
The following are general phone to uconnect 威 system pairing instructions: • press the phone button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙setup phone pairing.⬙ • when prompted, after the beep, say ⬙pair a phone⬙ and follow the audible prompts. • you will be asked to say a...
Page 86
• the system will prompt you to say the number you want to call. • for example, you can say ⬙234-567-8901⬙. • the uconnect威 system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call by saying a name • press the phone button to begin. • after ...
Page 87
• when prompted, enter the number designation (e.G., ⬙home,⬙ ⬙work,⬙ ⬙mobile,⬙ or ⬙pager⬙). This will allow you to store multiple numbers for each phonebook entry, if desired. • when prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an entry...
Page 88
• depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if available, the previous downloaded phonebook is available for use. • only the phonebook of the currently connected mobile phone is accessible. • only t...
Page 89
• if the phonebook entry is longer than 24 characters, it will only use the first 24 characters. Edit uconnect 威 phonebook entries note: • editing names in the phonebook is recommended when the vehicle is not in motion. • automatic downloaded phonebook entries cannot be deleted or edited. • press th...
Page 90
• after the ⬙ready⬙ prompt and the following beep, say ⬙phonebook delete.⬙ • after you enter the phonebook delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say ⬙list names ⬙ to h...
Page 91
List all names in the uconnect 威 phonebook • press the phone button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙phonebook list names.⬙ • the uconnect威 system will play the names of all the phonebook entries, including the downloaded phone- book entries, if available. • to call ...
Page 92
Answer or reject an incoming call - call currently in progress if a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cellular phone. Press the phone button to place the current call on hold ...
Page 93
Conference call when two calls are in progress (one active and one on hold), press and hold the phone button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-way calling to initiate three-way calling, press the voice recog- nition button whi...
Page 94
Call continuation call continuation is the progression of a phone call on the uconnect 威 system after the vehicle ignition key has been switched to off. Call continuation functionality avail- able on the vehicle can be any one of three types: • after the ignition key is switched to off, a call can c...
Page 95
Emergency assistance if you are in an emergency and the mobile phone is reachable: • pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the uconnect 威 system is operational, you may reach the emergency number as follows: • press the phone button...
Page 96
Towing assistance if you need towing assistance: • press the phone button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙towing assistance.⬙ note: • the towing assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the u.S., 1-877-213-...
Page 97
When calling a number with your uconnect 威 system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can press the voice recognition button and say the sequence you wish to enter, followed by the word ⬙send.⬙ for example, if required to enter your pin fol...
Page 98
Turning confirmation prompts on/off turning confirmation prompts off will stop the system from confirming your choices (e.G., the uconnect 威 sys- tem will not repeat a phone number before you dial it). • press the phone button to begin. • after the ⬙ready⬙ prompt and the following beep, say ⬙setup c...
Page 99
Mute/un-mute (mute off) when you mute the uconnect 威 system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the uconnect 威 system: • press the voice recognition button. • following the beep, say ⬙mute.⬙ ...
Page 100
• the uconnect威 system will play the phone names of all paired cellular phones in order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the voice recogni- tion button and say “select” or “delete.” also, see the next two sections for an alternate...
Page 101
Things you should know about your uconnect 姞 system uconnect 威 tutorial to hear a brief tutorial of the system features, press the phone button and say “uconnect 威 tutorial.” voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers, the uconnect ...
Page 102
• speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • make sure that no one other than you is speaking during a voice recognition period. • performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low...
Page 103
• in a convertible vehicle, system performance may be compromised with the convertible top down. Far end audio performance • audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather...
Page 104
102 understanding the features of your vehicle.
Page 105
Understanding the features of your vehicle 103 3.
Page 106
104 understanding the features of your vehicle.
Page 107
Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home understand...
Page 108
Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...
Page 109
General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....
Page 110
When you press the vr hard-key, you will hear a beep. The beep is your signal to give a command. Note: if you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the vr hard-key, listen ...
Page 111
Commands the voice recognition system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the volume 1. Start a dialogue by pressing the vr hard-key. 2. Say a command (e.G., “help”). 3. Use the...
Page 112
Radio fm to switch to the fm band say “fm” or “radio fm”. In this mode, you may say the following commands: • “frequency” (to change the frequency) • “next station” (to select the next station) • “previous station” (to select the previous station) • “radio menu” (to switch to the radio menu) • “main...
Page 113
Memo to switch to the voice recorder mode say “memo”. In this mode, you may say the following commands: • “new memo” (to record a new memo) — during the recording you may press the vr hard-key to stop recording. You proceed by saying one of the following commands: − “save” (to save the memo) − “cont...
Page 114
Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers, the uconnect 威 system voice training feature may be used. 1. Press the vr hard-key, say “system setup” and once you are in that menu then say “voice training.” this will train your own voi...
Page 115
Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched. Warning! • adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be ...
Page 116
Manual lumbar — if equipped the lumbar adjustment handle is located on the outboard side of the driver’s seat. To increase or decrease support, rotate the handle up or down. Driver’s seatback recline to recline: 1. Lean forward before lifting the handle, then lean back to the desired position and re...
Page 117
Adjustable head restraints head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraints so that the upper edge is as high as practical. To raise the head restraint, pull up on the head restraint. To lower the head restraint,...
Page 118
Heated seats — if equipped this feature heats the front driver and passenger seats. The heaters provide the same heat level for both cushion and back. The controls for the front heated seats are located on the center instrument panel area. After turning the ignition on, you can choose from high, low...
Page 119
Fold-flat front passenger seat to fold the front passenger seat, lift the recliner handle to the full upward position and push the seatback forward until it rests on the seat cushion. Fold-flat front passenger seat handle front passenger seat folded flat understanding the features of your vehicle 11...
Page 120
Folding rear seat to provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to move the seat forward and flat. Reclining rear seat — if equipped for additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback...
Page 121
Warning! • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • ...
Page 122
2. Move the safety catch outside the vehicle under the front edge of the hood, toward the center and raise the hood. Lift the hood prop rod, clipped to the right side (left side facing hood) of the engine compartment to secure the hood in the open position. Place the hood prop at the location stampe...
Page 123
Lights multifunction lever the multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and the fog lights. The multifunction lever is located on the left side of the ste...
Page 124
To change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down. Lights-on reminder if the headlights or parking lights are left on after the ignition is turned off, a chime will sound to alert the driver when the driver’s door is opened. Fog ...
Page 125
Note: the fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the fog lights. Daytime running lights (drl) — if equipped the high beam lights will come on as daytime running lights (drl) at drl intensity (lower), whenever the ignition is on, t...
Page 126
High beam/low beam select switch push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you, to switch the headlights back to low beam. Flash-to-pass you can signal another vehicle with your headlights by lightly pulling the multifunctio...
Page 127
Off-road lights — if equipped caution! The auxiliary lights mounted on the front bumper should be illuminated during “off-road use only”. Having them illuminated on public streets, high- ways, roads, etc. May be illegal in your state. Your state may also require auxiliary lights to be covered when o...
Page 128
Map/reading lights these lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the se...
Page 129
Windshield wipers and washers the wipers and washers are operated by a switch on the control lever. The lever is located on the right side of the steering column. Windshield wiper operation turn the end of the handle to select the desired wiper speed. Wiper control understanding the features of your...
Page 130
Intermittent wiper system use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever. Rotate the knob upward (clockwise) to decrease the delay time and downward (countercl...
Page 131
Mist feature push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate. Caution! In cold weather, always turn off the wiper switch and allow the wipers to...
Page 132
Tilt steering column to tilt the steering column, push down on the lever below the turn signal control lever. With one hand firmly on the wheel, move the steering column up or down as desired. Push the lever back up to lock the column firmly in place. Warning! Tilting the steering column while the v...
Page 133
Electronic speed control — if equipped when engaged, electronic speed control takes over accelerator operation at speeds greater than 25 mph (40 km/h). The electronic speed control lever is located on the right side of the steering wheel. To activate push the on/off button. The cruise indicator in t...
Page 134
Note: the vehicle should be traveling at a steady speed and on level ground before pressing the set lever. To deactivate a soft tap on the brake pedal, pulling the speed control lever toward you “cancel”, normal braking, or clutch pressure while slowing the vehicle, will deactivate speed control wit...
Page 135
Manual transaxle depressing the clutch pedal will disengage the speed control. A slight increase in engine rpm before the speed control disengages is normal. Vehicles equipped with manual transaxles may need to be shifted into a lower gear to climb hills without speed loss. Warning! Electronic speed...
Page 136
Garage door opener — if equipped homelink 威 replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The homelink 威 unit operates off your vehicle’s battery. The homelink 威 buttons that are l...
Page 137
Warning! • your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this trans- ceiver with a garage door opener that has a “stop and reverse” feature as required by ...
Page 138
Place the hand-held transmitter 1–3 in (3-8 cm) away from the homelink 威 button you wish to program while keeping the indicator light in view. 3. Simultaneously press and hold both the chosen homelink 威 button and the hand-held transmitter button until the homelink 威 indicator changes from a slow to...
Page 139
This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is not the button normally used to open and close the door). 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer. Note: there a...
Page 140
Gate operator/canadian programming canadian radio-frequency laws require transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for homelink 威 to pick up the signal during programming. Similar to this canadian law, some u.S. Gate operators ...
Page 141
Reprogramming a single homelink 姞 button to re-program a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the on/run position. 2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the bu...
Page 142
General information this device complies with fcc rules part 15 and industry canada rss-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may be received including interference that may cause ...
Page 143
Warning! • never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • in an accident, there is a gr...
Page 144
Closing the sunroof manual mode to close the sunroof, press and hold the switch in the forward position. Again, any release of the switch will stop the movement and the sunroof will remain in a partial close condition until the switch is pushed and held forward again. To ensure sunroof is fully clos...
Page 145
Venting sunroof — express press and hold the “v” button, and the sunroof will open to the vent position. This is called “express vent”, and will occur regardless of the sunroof position. During express vent operation, any movement of the switch will stop the sunroof. Sunshade operation the sunshade ...
Page 146
Electrical power outlets there is a standard 12-volt power outlet located in the instrument panel for added convenience. This outlet can power cell phones, electronics and other low power devices. Warning! To avoid serious injury or death: • do not use a three-prong adapter. • do not insert any obje...
Page 147
Caution! (continued) • accessories that draw higher power (i.E., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly. Only use these inter- mittently and with great caution. • after the use of high power draw accessories, or long periods of the vehicle not being starte...
Page 148
Warning! To avoid serious injury or death: • do not use a three-prong adaptor. • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled, it may cause an electric shock and failure. Caution! • many accessories tha...
Page 149
Storage glove compartment and storage bin located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. To open the lower glove compartment, pull outward on the release handle. 1 — upper storage bin 2 — lower glove compartment glove compartment underst...
Page 150
Door storage — if equipped the interior door panels are equipped with upper and lower storage areas. Front door storage rear door storage 148 understanding the features of your vehicle.
Page 151
Cupholders your vehicle is equipped with four cupholders. There are two cupholders located in the front. There are also two cupholders located in the back for the rear passengers. Front cupholders rear cupholders understanding the features of your vehicle 149 3.
Page 152
Console features the floor console contains both an upper and lower storage compartment. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the upper lid. To open the lower storage compartment, lift upward on the lower handle to unlatch the lower...
Page 153
Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cell phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury. C...
Page 154
To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Cargo cover — if equipped the cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. Warning! In an accident a cargo ...
Page 155
Removable load floor the cargo area load floor is removable and can be washed with mild soap and water. Cargo tie-down loops there are four d-rings installed in the cargo area for securing cargo. Warning! • cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or ...
Page 156
Warning! (continued) • place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway. • do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be...
Page 157
Activate the wiper. The rear wiper operates in an inter- mittent mode only. Rotating the center of the switch all the way forward will turn on the wash function. The wash pump will continue to operate as long as the button is pressed. Upon release, the wipers will cycle two times before returning to...
Page 158
The defroster will automatically turn off after approxi- mately 10 minutes. For an additional five minutes of operation, press the button a second time. To prevent excessive battery drain, use the defroster only when the engine is operating. Caution! Use care when washing the inside of the rear wind...
Page 159: Contents
Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . . 161 䡵 instrument cluster — premium . . . . . . . . . . . . 162 䡵 instrument cluster descriptions . . . . . . . . . . . . 163 䡵 electronic vehicle information center (evic) — if equipped. . . . . ...
Page 160
䡵 sales code req — am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 ▫ operating instructions - radio mode . . . . . . . 186 ▫ operation instructions - (disc mode for cd and mp3/wma audio play, dvd-video) . . . 194 ▫ no...
Page 161
▫ operation instructions — cd mode for cd and mp3 audio play . . . . . . . . . . . . . . . . . . 218 ▫ notes on playing mp3 files . . . . . . . . . . . . . 220 ▫ list button (cd mode for mp3 play) . . . . . . 223 ▫ info button (cd mode for mp3 play) . . . . . . 223 䡵 universal consumer interface (uc...
Page 162
䡵 remote sound system controls — if equipped. . . . . . . . . . . . . . . . . . . . . . . . . . . 235 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . 235 ▫ cd player . . . . . . . . . . . . . . . . . . . . . . . . . . 236 䡵 cd/dvd maintenance . . . . . . . . . . . . . . . . . . 236 䡵 rad...
Page 163
Instrument panel features 1 - air outlet 5 - storage bin 9 - heated seat switch – if equipped 2 - demisters 6 - glove compartment 10 - hazard warning flasher 3 - instrument cluster 7 - climate controls 11 - esp off switch – if equipped 4 - radio 8 - power outlet 12 - heated seat switch – if equipped...
Page 164
Instrument cluster — premium 162 understanding your instrument panel.
Page 165
Instrument cluster descriptions 1. Fuel gauge / fuel door reminder when the ignition switch is in the on position, the pointer will show the level of fuel remain- ing in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located. 2. Charging system light thi...
Page 166
4. Oil pressure warning light this light indicates low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on...
Page 167
9. High beam indicator this indicator shows that the headlights are on high beam. Push the multifunction lever forward to switch the headlights to high beam, and pull toward yourself (normal position) to return to low beam. 10. Anti-lock brake (abs) light this light monitors the anti-lock brake syst...
Page 168
13. Engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h, this indicator will illuminate and a single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass h, t...
Page 169
The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the brake warning light, which will turn on when the brake fluid level in the master cylinder has dropped below a...
Page 170
The light also will turn on when the parking brake is applied with the ignition switch in the on position. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Transmission temperature indicator during sustained high speed driving on ho...
Page 171
Warning! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see section 7 of this manual. Follow the warnings ...
Page 172
Or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) as an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (tpms) that illuminates a low tire pressure telltale when one or more of your tires is signifi...
Page 173
Caution! The tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, t...
Page 174
Driven. Therefore, if the odometer reading is changed during repair or replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can be determined. Change oil message your vehicle is equipped with an engine oil change indicator system. The “change ...
Page 175
Certain conditions such as a loose or missing gas cap, poor fuel quality, etc. May illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations the vehicle will drive normally and will not require tow...
Page 176
Cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible. 29. 4wd! Warning light — if equipped this light monitors the 4-wheel drive (4wd) system. The light will come on, for a bulb check, when the ignition key is tur...
Page 177
Electronic vehicle information center (evic) — if equipped the electronic vehicle information center (evic) fea- tures a driver-interactive display that is located in the instrument cluster. The evic consists of the following: • system status • vehicle information warning message displays • personal...
Page 178
When the appropriate conditions exist, the evic displays the following messages: • turn signal on (with a continuous warning chime after one mile traveled) • left front turn signal light out (with a single chime) • left rear turn signal light out (with a single chime) • right front turn signal light...
Page 179
Unless reset, this message will continue to display each time you turn the ignition switch to the on/run position. To turn off the message temporarily, press and release the trip odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maint...
Page 180
• distance to empty (dte) • elapsed time • tire pressure monitor (tpm) • personal settings to reset the display pressing and holding the evic button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed. To reset all reset...
Page 181
Distance to empty (dte) shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. This is not resettable. Note: significan...
Page 182
Use the evic button to display one of the following choices: language when in this display you may select different languages for all display nomenclature, including the trip functions. Pressing the evic button while in this display selects english, espanol, deutsch, italiano, or francais depend- in...
Page 183
Sound horn with remote key lock when on is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. Press and hold the evic button when in this display until “on” or “off” appears to...
Page 184
Delay power off to accessories until exit when this feature is selected the power window switches, radio, hands–free system, power sunroof, and power outlets will remain active for up to 60 minutes after the ignition switch has been turned off. Opening a vehicle door will cancel this feature. Press ...
Page 185
Note: magnetic and battery powered devices, (such as cell phones, ipod’s, radar detectors, pda’s and laptops) should be kept away from the top of the instrument panel. This is where the compass module is located and such devices may interfere and cause false compass readings. To set the variance wit...
Page 186
Compass calibration if the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manu- ally recalibrate the compass. To manually calibrate the compass: 1. Start the engine and leave the transmission in the park position. 2. Press and release the evic button (...
Page 187
Electronic digital clock the clock and radio each use the display panel built into the radio. A digital readout shows the frequency and/or time in hours and minutes (depending on your radio model), whenever the ignition switch is in the on or acc position. When the ignition switch is in the off posi...
Page 188
Sales code req — am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions - radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/vo...
Page 189
Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...
Page 190
Clock setting procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, press the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the mi...
Page 191
Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...
Page 192
Program type 16-digit character display classic rock cls rock college college country country foreign language language information inform jazz jazz news news nostalgia nostalga oldies oldies personality persnlty public public rhythm and blues r & b religious music rel musc religious talk rel talk r...
Page 193
Setup button pressing the setup button allows you to select between the following items: note: turn the tune/scroll control knob to scroll through the entries. Push the audio/select button to select an entry and make changes. • dvd enter - when the disc is in dvd menu mode, selecting dvd enter will ...
Page 194
• ves™ lock - locks out rear ves™ remote controls (if equipped). • ves™ ch1/ch2 - allows the user to change the mode of either the ir1 or ir2 wireless headphones by pressing the audio/select button (if equipped). • set home clock - pressing the select button allows you to set the clock. Turn the tun...
Page 195
The tune/scroll control knob to scroll up and down to select the number and then push to select. Subtitles — if equipped selecting this item allows you to choose between subtitle off or on. Audio drc — if equipped selecting this item allows you to limit maximum audio dynamic range. The default is se...
Page 196
You may add a second station to each pushbutton by repeating the above procedure with this exception: press the set button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2 in both am and fm. This allows a total of 12 am, 12 fm, and 12 satellite (if equipped...
Page 197
Note: the ignition switch must be in the on or acc position to operate the radio. Load button — loading compact disc(s) press the load button and the pushbutton with the corresponding number (1-6) where the cd is being loaded. The radio will display please wait and prompt when to insert disc. After ...
Page 198
Scan button (cd mode) press the scan button to scan through each track on the cd currently playing. Time button (cd mode) press this button to change the display from a large cd playing time display to a small cd playing time display. Rw/ff (cd mode) press and hold ff (fast forward) and the cd playe...
Page 199
The radio uses the following limits for file systems: • maximum number of directory levels: 8 • maximum number of files: 255 • maximum number of folders: 100 • maximum number of characters in file/folder names: • level 1: 12 (including a separator ⬙.⬙ and a three- character extension) • level 2: 31 ...
Page 200
Mpeg specification sampling frequency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48 wma specification sampling frequency (khz) bit rate (kbps) wma 44.1 and 48 48,...
Page 201
List button (disc mode for mp3/wma play) pressing the list button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the tune/scroll control knob. Selecting a folder by pressing the tune/scroll control knob will begin playing the files contained in that...
Page 202
Scan button (auxiliary mode) no function. Eject button (auxiliary mode) no function. Time button (auxiliary mode) press the time button to change the display from elapsed playing time to time of day. The time of day will display for five seconds. Rw/ff (auxiliary mode) no function. Set button (auxil...
Page 203
Dolby 威 manufactured under license from dolby 威 laboratories. ⬙dolby威⬙ and the double-d symbol are trademarks of dolby 威 laboratories. Macrovision this product incorporates copyright protection technol- ogy that is protected by u.S. Patents and other intellec- tual property rights. Use of this copyr...
Page 204
Operating instructions — hands-free communication (uconnect 姞 ) — if equipped refer to “hands-free communication (uconnect 威)” in section 3. Clock setting procedure global positioning system (gps) — rer only the gps receiver used in this system is synchronized to the time data being transmitted by t...
Page 205
Changing daylight savings time when selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. ...
Page 206
Sales code res — am/fm stereo radio with cd player (mp3 aux jack) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (r...
Page 207
Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...
Page 208
Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...
Page 209
And 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to ...
Page 210
Caution! • this cd player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. • do not use adhesive labels. These labels can peel away and jam the player mechanism. • res is a single cd player. Do not attempt to insert a second cd if one is alrea...
Page 211
Rw/ff press the rw button to stop the cd at the beginning of the current cd track/title. Press and hold the ff (fast forward) button and the cd player will begin to fast forward until ff is released, or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm butt...
Page 212
The radio uses the following limits for file systems: • maximum number of folder levels: 8 • maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file ...
Page 213
Rates (vbr) are also supported. The majority of mp3 files use a 44.1 khz sampling rate and a 192, 160, 128, 96 or vbr bit rate. Mpeg specification sampling frequency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio lay...
Page 214
Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the user to plug in a portable device, such as an mp3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the dis...
Page 215
Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...
Page 216
Phone button (uconnect 威 hands-free phone) — if equipped press this button to operate the hands-free phone (uconnect 威) feature (if equipped). Refer to “hands-free communication (uconnect 威)” in section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “not ...
Page 217
Info button press the info button for an rds station (one with call letters displayed). The radio will return a radio text message broadcast from an fm station (fm mode only). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the directi...
Page 218
Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently broadcast music type inf...
Page 219
Program type 16-digit character display sports sports talk talk top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in...
Page 220
You may add a second station to each pushbutton by repeating the above procedure with this exception: press the set/rnd button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2 in both am and fm. This allows a total of 12 am and 12 fm stations to be stored i...
Page 221
If you insert a disc with the ignition on and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the disc number, the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this ...
Page 222
The current selection. Pressing and holding the seek button will allow faster scrolling through the tracks in cd and mp3 modes. Time button press this button to change the display from a large cd playing time display to a small cd playing time display. Rw/ff press the rw button to stop the cd at the...
Page 223
Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded using formats other than iso 9660 level 1 and level 2, the radio may fail to read files properly and may be unable to play...
Page 224
Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...
Page 225
Loading times for playback of mp3 files may be affected by the following: • media - cd-rw media may take longer to load than cd-r media • medium formats - multisession discs may take longer to load than non-multisession discs • number of files and folders - loading times will increase with more file...
Page 226
Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the aux but...
Page 227
Uci supports mini, 4g, photo, nano, 5g ipod 威 and iphone 威 devices. Some ipod威 software versions may not fully support the uci features. Please visit apple’s website for software updates. Note: • if the radio has a usb port, connecting an ipod威 to this port does not play the media. For playing an ip...
Page 228
• the ipod威 can be controlled using the radio buttons to play, browse, and list the ipod 威 contents. • the ipod威 battery charges when plugged into the uci connector. Controlling the ipod 姞 using radio buttons to get into the uci (ipod 威) mode and access a connected ipod 威, press the ‘aux’ button on ...
Page 229
• use the seek and seek >> buttons to jump to the previous or next track. If the seek button is pressed during the first two seconds of the track, it will jump to the previous track in the list, if you press this button at any other time in the track it will jump to the beginning of the track. If yo...
Page 230
• turning it clockwise (forward) and counterclock- wise (backward) scrolls through the lists, displaying the track detail on the radio display. Once you have the track to be played highlighted on the radio display, press the tune control knob to select and start playing the track. Turning the tune c...
Page 231
The same steps to go to the desired track in that list. Not all ipod 威 sub-menu levels are available on this system. • music type button: the music type button is another shortcut button to the genre listing on your ipod 威. Caution! • leaving the ipod威 (or any supported device) any- where in the veh...
Page 232
System activation sirius satellite radio service is pre-activated and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, includi...
Page 233
Next, turn the knob surrounding the joystick in the center of the radio to scroll to subscription, and then press and release the joystick. All of the esns that apply to your vehicle will display. Selecting satellite mode press the sat button until ⬙sat⬙ appears in the display. A cd may remain in th...
Page 234
Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without st...
Page 235
Music type button — except reu radio pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program format type to be se- lected. Toggle the music type button again to sele...
Page 236
Set button – to set the pushbutton memory when you are receiving a channel that you wish to commit to pushbutton memory, press the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a butt...
Page 237
Remote sound system controls — if equipped the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker type switch with a pushbutton in the center. Pressing the top of the switch will increa...
Page 238
Cd player press the top of the switch once to go to the next track on the cd. Press the bottom of the switch once to go to the beginning of the current track or to the beginning of the previous track, if it is within one second after the current track begins to play. If you press the switch up or do...
Page 239
Radio operation and cellular phones under certain conditions, the cellular phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your...
Page 240
The controls are as follows: mode control (air direction) the mode control allows you to choose from several patterns of air distribution as identified by the symbols. Panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct air flow. Bi-level air is...
Page 241
Note: the air conditioning compressor operates in both mix and defrost even if the air conditioning snowflake button is not pressed. This dehumidifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary. Air outlets the airflow from each of the instrument...
Page 242
Temperature control use this control to regulate the temperature of the air inside the passenger compartment. The blue area of the scale indicates cooler temperatures while the red area indicates warmer temperatures. Note: if your air conditioning performance seems lower than expected, check the fro...
Page 243
Note: recirculation mode will not operate in floor, mix or defrost modes. Air conditioning (a/c) a/c operation use this button to engage the air conditioning. A lamp will illumi- nate when the air conditioning system is engaged. Once the air conditioning is engaged, use a combination of the mode con...
Page 244
Air filtration system — if equipped an air filter is included in the optional security group. Filter media includes a particle filtration layer. The filter will reduce, but not eliminate, diesel and agricultural smells. The filter acts only on air coming from outside the vehicle; it does not filter ...
Page 245
Operating tips understanding your instrument panel 243 4.
Page 246
Window fogging vehicle side windows tend to fog on the inside in mild rainy or humid weather. To clear the windows, set mode to the mix or defrost position. Direct the panel outlets toward the side windows. Do not use recirculate without a/c for long periods as fogging may occur. Interior fogging on...
Page 247
Side window demisters a side window demister outlet is at each end of the instrument panel. These nonadjustable outlets direct air toward the side windows when the system is in either the floor, mix, or defrost mode. The air is directed at the area of the windows through which you view the outside m...
Page 249: Starting And Operating
Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 251 ▫ manual transmission — if equipped . . . . . . . 251 ▫ automatic transmission — if equipped . . . . . 251 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 252 ▫ extremely cold weather (below...
Page 250
䡵 autostick威 — if equipped . . . . . . . . . . . . . . . 260 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . . 260 ▫ general information . . . . . . . . . . . . . . . . . . . 261 䡵 four-wheel drive operation — if equipped . . . 261 䡵 driving on slippery surfaces . . . . . . . . . . . ....
Page 251
䡵 tires — general information . . . . . . . . . . . . . . 288 ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . . 288 ▫ tire inflation pressures . . . . . . . . . . . . . . . . . 289 ▫ tire pressures for high speed operation . . . . 291 ▫ radial ply tires . . . . . . . . . . . . . . . . ...
Page 252
䡵 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . 312 ▫ fuel filler cap (gas cap) . . . . . . . . . . . . . . . 312 ▫ loose fuel filler cap message . . . . . . . . . . . 313 䡵 vehicle loading . . . . . . . . . . . . . . . . . . . . . . . 314 ▫ vehicle certification label . . . . . . . ...
Page 253
Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ou...
Page 254
Normal starting normal starting of either a cold or a warm engine does not require pumping or depressing the accelerator pedal. Simply turn the ignition switch to the start position and release when the engine starts. If the engine fails to start within 15 seconds, turn the ignition switch to the of...
Page 255
If engine fails to start if the engine fails to start after you have followed the “normal starting” procedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there. Crank the engine for no more than 15 seconds. This should clear any excess fuel in case the engine ...
Page 256
Manual transaxle — if equipped 5–speed manual transaxle warning! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should al- ways be applied when the driver is not in the vehicle, especially on an incline. Fully depr...
Page 257
For most city driving, you will find it easier to use only the lower gears. For steady highway driving with light accelerations, 5th gear is recommended. Never drive with your foot resting on the clutch pedal, and never try to hold the vehicle on a hill with the clutch pedal partially engaged. This ...
Page 258
To maintain a safe speed and prolong brake life, shift down to 2nd or 1st gear when descending a steep grade. When turning a corner or driving up a steep grade, downshift early so that the engine will not be overburdened. Automatic transaxle — if equipped note: the continuously variable automatic tr...
Page 259
Warning! It is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only s...
Page 260
Gear ranges do not race the engine when shifting from park or neutral positions into another gear range. Park supplements the parking brake by locking the transmis- sion. The engine can be started in this range. Never use park while the vehicle is in motion. Apply the parking brake when leaving the ...
Page 261
The following indicators should be used to ensure that you have engaged the shift lever into the park position: • when shifting into park, firmly move the shift lever all the way forward until it stops. • look at the shift indicator window on the shift lever bezel to ensure it is in the park positio...
Page 262
Autostick 姞 — if equipped autostick 威 is a driver-interactive transmission that offers six manual ratio changes to provide you with more control. Autostick 威 allows you to maximize engine brak- ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system c...
Page 263
General information • if a ratio other than 1st is selected and the vehicle is brought to a stop, the transaxle control logic will automatically select the 1st gear ratio. • if a low range is selected and the engine accelerates to the rev limit, the transaxle will automatically select the next highe...
Page 264
Where one or more wheels have wheel spin or if addi- tional traction is needed in sand, deep snow, or loose traction surfaces, activate the 4wd lock switch by pulling up once and releasing. This locks the center coupling allowing more torque to be sent to the rear wheels. The 4wd indicator light wil...
Page 265
Traction when driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observ...
Page 266
Shallow standing water although your vehicle is capable of driving through shallow standing water, consider the following caution and warning before doing so. Caution! • always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the...
Page 267
Warning! • driving through standing water limits your vehi- cle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • driving through standing water limits your vehi- cle’s braking capabilities, which increases stop- ping distances. Therefore, after driving thr...
Page 268
Warning! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Caution! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature an...
Page 269
Parking brake when the parking brake is applied with the ignition on, the brake light in the instrument cluster will come on. Note: this light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle is moving, a chi...
Page 270
You should always apply the parking brake before leav- ing the vehicle. Warning! • never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key in the ignition. A ...
Page 271
If either of the two hydraulic systems lose normal capa- bility, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop. In addition, if the malfuncti...
Page 272
Warning! (continued) • the abs cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. • the capabilities of an abs-equipped vehicle must never be e...
Page 273
Abs is activated during braking under certain road or stopping conditions. Abs-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You may also experience the following when the brake system goes into anti-lock mode: • the abs motor running (it ...
Page 274
Electronic brake control system your vehicle may be equipped with an optional ad- vanced electronic brake control system that includes anti-lock brake system (abs), traction control system (tcs), brake assist system (bas), electronic roll mitiga- tion (erm), and electronic stability program (esp). A...
Page 275
Brake assist system (bas) the bas is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce...
Page 276
Electronic roll mitigation (erm) this system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When erm determines that the rate of change of the steering wheel angle and vehicles speed are sufficient to potentially cause wheel lif...
Page 277
Electronic stability program (esp) this system enhances directional control and stability of the vehicle under various driving conditions. Esp cor- rects for over-steering or under-steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over-steering or ...
Page 278
Warning! (continued) • esp cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. • the capabilities of an esp-equipped vehicle must never be exploited i...
Page 279
To turn esp on again, momentarily depress the esp off switch. This will restore the normal “esp on” mode of operation. Note: to improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, it may be desirable to switch to the “partial off” mode by press...
Page 280
To turn esp on again, momentarily depress the esp off switch. This will restore the “esp on” mode of operation. Note: the “esp off” message will display and an audible chime will sound when the shift lever is placed into the park position from any other position, and then moved out of the park posit...
Page 281
Note: • the “esp indicator light” and the “esp/bas warning light” come on momentarily each time the ignition switch is turned on. • each time the ignition is turned on, the esp system will be on even if it was turned off previously. • the esp control system will make buzzing or clicking sounds when ...
Page 282
Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...
Page 283
Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ....Blank....ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t = temporary spare tire 31 = overall diameter in inches (in) 215 = sec...
Page 284
Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...
Page 285
Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...
Page 286
Tire loading and tire pressure tire placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar. Tire and loading information placard this placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total wei...
Page 287
Note: under a maximum loaded vehicle condition, gross axle weight ratings (gawrs) for the front and rear axles must not be exceeded. For further information on gawrs, vehicle loading, and trailer towing, refer to “vehicle loading” in this section. To determine the maximum loading conditions of your ...
Page 288
6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Note: • the following table shows examples on how to calcu- late total load, cargo...
Page 289
Starting and operating 287 5.
Page 290
Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...
Page 291
Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...
Page 292
Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.” ...
Page 293
Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...
Page 294
Compact spare tire — if equipped the compact spare is for temporary emergency use with radial tires. It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- stalled at the first opportunity. Warning!...
Page 295
Vehicle, but it is not. Installation of this limited-use spare tire affects vehicle handling. Since it is not the same tire, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity. Warning! The limited-use spare tires are for emergency use only. Installation of t...
Page 296
Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...
Page 297
Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with...
Page 298
Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...
Page 299
Tire chains due to limited clearance, tire chains are not recom- mended. Caution! Damage to the vehicle may result if tire chains are used. Snow tires some areas of the country require the use of snow tires during winter. Standard tires are of the all-season type and satisfy this requirement as indi...
Page 300
These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow and wet traction levels, and contribute to a smooth, quiet ...
Page 301
Inflation pressure molded into the tire sidewall. Refer to “tires – general information” in this section for information on how to properly inflate the vehicle’s tires. The tire pressure will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased...
Page 302
Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, ...
Page 303
• seasonal temperature changes will affect tire pressure, and the tpms will monitor the actual tire pressure in the tire. Base system this is the tpms warning indicator located in the instrument cluster. The tpms uses wireless technology with wheel rim mounted electronic sensors to monitor tire pres...
Page 304
Check tpms warnings the tire pressure monitoring telltale light will flash on and off for 75 seconds and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The ti...
Page 305
5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the tpms will update automatically and the tire pressure monitoring telltale light will turn off, as long as no tire pressure is below the low-pressure warning limit in any of the...
Page 306
Tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low. The audible chime will sound once every ignition cycle for ea...
Page 307
Graphic display of the pressure value(s) will stop flash- ing, and the tire pressure monitoring light will extin- guish once the updated tire pressure(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check tpms messag...
Page 308
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the tire pressure monitoring telltale light will no longer flash, the ⬙check tpm system⬙ text message will not be present, and a pressure value will be displayed i...
Page 309
4. For each subsequent ignition key cycle, a chime will sound and the tire pressure monitoring telltale light will flash on and off for 75 seconds and then remain on solid. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the tp...
Page 310
Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is required. Poor quality gasoline can cause problems such as hard starting, stalling and hesitations. If you experience these symptoms, tr...
Page 311
E-85 usage in non-flex fuel vehicles non-ffv vehicles are compatible with gasoline contain- ing 10% ethanol (e10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all of these symptoms: • ...
Page 312
It is even more important to look for gasolines without mmt in canada, because mmt can be used at levels higher than those allowed in the united states. Mmt is prohibited in federal and california reformu- lated gasolines. Materials added to fuel all gasoline sold in the united states is required to...
Page 313
Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such ...
Page 314
Adding fuel fuel filler cap (gas cap) the gas cap is behind the fuel filler door, on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. After removing the gas cap, place the gas cap tether cable over a hook on the inside of the ...
Page 315
Note: when the fuel nozzle “clicks” or shuts off, the fuel tank is full. Warning! • never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • never add fuel when the engine is running. This is in violation of most state and federal fire regula- tio...
Page 316
Caution! Damage to the fuel system or emission control sys- tem could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Vehicle loading as required by national highway traffic safety admin- istration regulations, your vehicl...
Page 317
Rim size this is the rim size that is appropriate for the tire size listed. Inflation pressure this is the cold tire inflation pressure for your vehicle, for all loading conditions. Curb weight the curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehi...
Page 318
Caution! Do not load your vehicle any heavier than the gvwr. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle. Trailer towing in this section you will find safety ti...
Page 319
Gross combination weight rating (gcwr) the gcwr is the total permissible weight of your vehicle and trailer when weighed in combination. Note: the gcwr ratings include a 150 lbs (68 kg) allowance for the presence of a driver. Gross axle weight rating (gawr) the gawr is the maximum capacity of the fr...
Page 320
Weight-carrying hitch a weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kind of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized ...
Page 321
Trailer hitch classification class max. Gtw (gross trailer wt.) class i - light duty 2,000 lbs (907 kg) refer to the “trailer towing weights (maximum trailer weight ratings)” chart for the maximum gross trailer weight (gtw) towable for your given drivetrain. All trailer hitches should be professiona...
Page 322
Note 1 – the trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the tire and loading information placard. Refer to “tire–safety information” in this section. Trailer and tongue weight always load a trailer ...
Page 323
Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the tire and loading information placard in the tire ...
Page 324
• when hauling cargo or towing a trailer, do not over- load your vehicle or trailer. Overloading can cause a loss of control, poor performance or damage to brakes, axle, engine, transmission, steering, suspension, chas- sis structure or tires. • safety chains must always be used between your vehicle...
Page 325
Towing requirements — tires − do not attempt to tow a trailer while using a compact spare tire. − proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “tires – general information” in this section for proper tire inflation procedures. − also,...
Page 326
Caution! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Warning! Do not connect trailer brakes ...
Page 327
4-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn 7-pin connector 1 — battery 5 — ground 2 — backup lamps 6 — left stop/turn 3 — right stop/turn 7 — running lamps 4 — electric brakes starting and operating 325 5.
Page 328
Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Towing tips — automatic transmission the automatic transmission fluid and filter should be changed if you regularly tow a trailer for more than 45 minutes of continuous op...
Page 329
Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle (flat towing with all four wheels on the ground) recreational towing condition manual transaxle vehicles automatic transaxle vehicles four wheel flat tow (all wheels on ground) yes never two wheel dolly tow (fron...
Page 331: Contents
What to do in emergencies contents 䡵 hazard warning flasher . . . . . . . . . . . . . . . . . 330 䡵 if your engine overheats . . . . . . . . . . . . . . . . 330 䡵 automatic transaxle overheating . . . . . . . . . . 332 䡵 jacking and tire changing . . . . . . . . . . . . . . . 332 ▫ jack location . ....
Page 332
Hazard warning flasher the hazard warning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the hazard warning flashers. When the hazard warning flasher switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of a...
Page 333
Note: there are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the a/c removes this heat. You can also turn the temperature control to maximum heat, t...
Page 334
Warning! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to “maintenance”, section 7 of this manual. Follow the warnings un...
Page 335
Jack location the jack and jack-handle are stowed under the load floor in the cargo area. Spare tire stowage the compact spare tire is stowed under the rear load floor in the cargo area. Spare tire removal lift up the load floor cover and remove the hold down. Preparations for jacking 1. Park the ve...
Page 336
5. Turn on the hazard warning flasher. 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. Note: passengers should not remain in the vehicle while the vehicle is being jacked. Jacking instru...
Page 337
Warning! (continued) • if working on or near a roadway, be extremely careful of motor traffic. • to assure that spare tires, flat or inflated are securely stowed, spares must be stowed with the valve stem facing the ground. • turn on the hazard warning flasher. 1. Remove the scissors jack and lug wr...
Page 338
Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3. 3. There are two front jacking locations and two rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cu...
Page 339
Warning! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. Note: the wheel cover is held on the wheel by the wheel nuts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the wheel cover onto the ...
Page 340
Warning! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immedi- ately. 11. Check the tire pressure as soon as possible. Correct the tire pressure as required. Jump-starting procedures warning! • ta...
Page 341
Transaxle (cvt2) to go into “default mode” and turn on the malfunction indicator light (mil). See your autho- rized dealer to correct this condition. 1. When boosting from a battery in another vehicle, park that vehicle within booster cable reach but without letting the vehicles touch. Set the parki...
Page 342
6. If the vehicle is equipped with a sentry key 威 immo- bilizer, turn the ignition switch to the on position for three seconds before moving the ignition switch to the start position. 7. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, then start the e...
Page 343
Caution! Racing the engine or spinning the wheels too fast may lead to transaxle overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h). Do not spin the wheels continu- ously for more than 30 seconds. Towing a disabled vehicle with ignition key automatic...
Page 344
All transaxles if it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the on position, not the acc position. Make certain the trans- mission remains in neutral. Caution! • if the vehicle being towed requires steering, the ignition switch must be in...
Page 345: Maintaining Your Vehicle
Maintaining your vehicle contents 䡵 engine compartment — 2.0l/2.4l . . . . . . . . . . 345 䡵 onboard diagnostic system — obd ii . . . . . . . 346 ▫ loose fuel filler cap message . . . . . . . . . . . 346 䡵 emissions inspection and maintenance programs . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 346
▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 364 ▫ automatic transaxle (cvt) . . . . . . . . . . . . . . 366 ▫ manual transaxle . . . . . . . . . . . . . . . . . . . . 366 ▫ rear drive assembly (rda) – awd/4wd models only . . . . . . . . . . . . . . . . . . . . . . . . 367 ▫ power tr...
Page 347
Engine compartment — 2.0l/2.4l 1 — washer fluid reservoir 6 — battery 2 — power steering fluid reservoir 7 — air cleaner filter 3 — engine oil fill 8 — coolant pressure cap 4 — brake fluid reservoir 9 — engine oil dipstick 5 — integrated power module 10 — engine coolant reservoir maintaining your ve...
Page 348
Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are oper- ating properly, your vehicle will provide exc...
Page 349
Persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the mil. Resolving the problem will turn the mil light off. Emissions inspection and maintenance programs in some localities, ...
Page 350
5. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...
Page 351
Dealer service your authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any pro...
Page 352
The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading. Checking the oil while the ve...
Page 353
American petroleum institute (api) engine oil identification symbol this symbol means that the oil has been certified by the american petroleum institute (api). The manufacturer only recommends api certified engine oils. Engine oil viscosity (sae grade) sae 5w-20 engine oil is recommended for all op...
Page 354
Disposing of used engine oil and oil filters care should be taken in disposing of used engine oil and oil filtersfrom your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment. Contact your authorized dealer, service station, or governmental agency ...
Page 355
Maintenance-free battery the top of the maintenance-free battery is permanently sealed. You will never have to add water, nor is periodic maintenance required. Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, ...
Page 356
Caution! (continued) • if a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery. Do not use a “fast charger” to provide starting voltage. Air conditioner maintenance for best possible performance, your air co...
Page 357
Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency and is an ozone-saving product. How- ever, the manufacturer recommends that air conditioning service be performed by authorized dealers or oth...
Page 358
Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen t...
Page 359
Exhaust system each time the vehicle is raised for an oil change or lubrication. Replace as required. Warning! Exhaust gases can injure or kill. They contain carbon monoxide (co) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing ...
Page 360
Warning! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situati...
Page 361
Warning! (continued) • you or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Coolant ch...
Page 362
Caution! • mixing of engine coolant (antifreeze) other than specified hybrid organic additive technology (hoat) engine coolant (antifreeze), may result in engine damage and may decrease corrosion pro- tection. If a non-hoat engine coolant (antifreeze) is introduced into the cooling system in an emer...
Page 363
When adding engine coolant (antifreeze), a minimum solution of 50% recommended mopar 威 antifreeze/ coolant 5 year/100,000 mile formula hoat (hybrid organic additive technology), or equivalent, in water should be used. Use higher concentrations (not to exceed 70%) if temperatures below ⫺34°f (⫺37°c) ...
Page 364
Warning! • the warning words “do not open hot” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To pre...
Page 365
When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to remember note: when the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine co...
Page 366
Only the correct type thermostat. Other designs may result in unsatisfactory engine coolant (antifreeze) performance, poor gas mileage, and increased emissions. Brake system in order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “maint...
Page 367
Fluid reservoir is low and the brake system does not indicate any leaks or other problems, it may be a result of a leak in the hydraulic clutch release system. See your local authorized dealer for service. Use only manufacturer’s recommended brake fluid. Re- fer to “fluids, lubricants, and genuine p...
Page 368
Automatic transaxle (cvt) selection of lubricant it is important that the proper lubricant is used in the transaxle to assure optimum transaxle performance. Use only the manufacturer’s recommended transmission fluid which has been formulated with special metal to metal friction coefficient additives...
Page 369
Fluid level check check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more that 3/16 in (4.7 mm) below the bottom of the hole. Add fluid, if necessary, to maintain the proper level. Frequency of fluid change under normal oper...
Page 370
Power transfer unit (ptu) – awd/4wd models only lubricant selection use only the manufacturer’s recommended fluid. Refer to “fluids, lubricants, and genuine parts” in this section for the correct fluid type. Fluid level check visually inspected the unit at each oil change for leakage. If leakage is ...
Page 371
The most common causes of corrosion are: • road salt, dirt and moisture accumulation. • stone and gravel impact. • insects, tree sap and tar. • salt in the air near sea coast localities. • atmospheric fallout/industrial pollutants. Washing • wash your vehicle regularly. Always wash your ve- hicle in...
Page 372
Special care • if you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • it is important that the drain holes in the lower edges of the doors, rocker panels and trunk be kept clear and open. • if you detect any stone chips or scratches ...
Page 373
Yes essentials 威 fabric cleaning procedure – if equipped yes essentials 威 seats may be cleaned in the following manner: • remove as much of the stain as possible by blotting with a clean, dry towel. • blot any remaining stain with a clean, damp towel. • for tough stains, apply mopar威 total clean or ...
Page 374
Warning! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas, they may cause respiratory harm. Cleaning headlights your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is...
Page 375
Instrument panel bezels caution! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully. Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface. Cleaning plastic instrument cluster lenses the...
Page 376
Fuses integrated power module (ipm) the integrated power module (ipm) is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A label that identifies each component may be printed on the inside of the cover. Refer to “engine compartmen...
Page 377
Cavity cartridge fuse mini- fuse description 13 20 amp yellow pwr run/acc outlet rr/dome lamp 14 10 amp red iod ccn 15 40 amp green rad fan relay bat- tery feed 16 15 amp lt blue ign run/acc dome lamp/sunroof/rear wiper motor/acc inverter 17 10 amp red iod feed mod-wcm 18 40 amp green asd relay cont...
Page 378
Cavity cartridge fuse mini- fuse description 28 10 amp red ign run orc/ocm feed 29 hot car (no fuse re- quired) 30 20 amp yellow heated seats 31 10 amp red headlamp washer relay control (if equipped) 32 30 amp pink eng asd control feed 1 33 10 amp red abs mod/j1962 conn/pcm 34 30 amp pink abs valve ...
Page 379
Caution! (continued) • when replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system over- load. If a properly rated fuse continues to blow, it indicates a problem i...
Page 380
Bulb replacement headlamps 1. Raise the hood and locate the connector behind the headlight. 2. Reach into the engine compartment and pull the red lock out at the green connector. 378 maintaining your vehicle.
Page 381
3. Remove green connector from back of bulb by pulling straight back. 4. Twist the bulb to the left. Maintaining your vehicle 379 7.
Page 382
5. Pull bulb outward from assembly. Note: these are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog lights 1. Access lamp through the lower fascia cutout. 2. Rotate bulb and connector 1/4 tu...
Page 383
Tail lights, rear turn signals and backup lights — replacement 1. Remove the two push-pins from the tail light housing. 2. Grasp the tail lamp and pull firmly to disengage the lamp from the aperture panel. 3. Twist and remove socket from lamp. Maintaining your vehicle 381 7.
Page 384
4. Remove bulb from socket and replace. License lights 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp from the liftgate. 382 maintaining your vehicle.
Page 385
2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. Maintaining your vehicle 383 7.
Page 386
Center high-mounted stoplight light is an led assembly. See your authorized dealer for replacement. Off-road light 1. Remove the three screws attaching the lens to the housing. 2. Unlatch the wire clasp securing the bulb into the housing and rotate it into the position shown. 384 maintaining your ve...
Page 387
3. Disconnect the bulb from the lamp harness to replace the bulb. Maintaining your vehicle 385 7.
Page 388
Fluids and capacities u.S. Metric fuel (approximate) 13.6 gallons 51.5 liters engine oil with filter 2.0l and 2.4l engine (sae 5w-20, api certified) 4.5 quarts 4.26 liters cooling system * 2.0l and 2.4l engine (mopar 威 engine coolant/antifreeze 5 year/100,000 mile formula) 7.2 quarts 6.8 liters * in...
Page 389
Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hybrid organic additive technology) engine oil use api certified sae 5w-20 engine oil, meeting the requirements of chrysler material st...
Page 390
Chassis component fluid, lubricant, or genuine part automatic transaxle (cvt) mopar 威 cvtf + 4 automatic transmission fluid manual transaxle mopar 威 atf+4 automatic transmission fluid rear drive assembly (rda) mopar 威 gear & axle lubricant sae 80w-90 api gl 5 or equivalent non- synthetic product. Po...
Page 391: Maintenance Schedules
Maintenance schedules contents 䡵 emissions control system maintenance . . . . . . 390 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 390 ▫ required maintenance intervals . . . . . . . . . . 392 8 m a i n t e n a n c e s c h e d u l e s.
Page 392
Emissions control system maintenance the scheduled maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done t...
Page 393
Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change and even if the oil change indicator message is not illuminated. • change your engine oil more often if you drive your vehicle ...
Page 394
Once a month • check the tire pressure and look for unusual wear or damage. • inspect the battery and clean and tighten the terminals as required. • check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed. • check all lights and other ele...
Page 395
6,000 miles (10,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 12,000 miles (20,000 km) or 12 months maintenance service schedule ❏ change the engine...
Page 396
18,000 miles (30,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. Odometer reading date repair order # dealer code signature authorized chrysler dealer 24,000 miles (40,000 km) or 24 months maintenance service schedule ❏ change the engi...
Page 397
30,000 miles (50,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ replace the spark plugs (except 2.4l pzev). ❏ adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odomet...
Page 398
48,000 miles (80,000 km) or 48 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake linings; ...
Page 399
60,000 miles (100,000 km) or 60 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ inspect the brake linings; replace if necessary. ❏ adjust the parking brake on vehicles equipped with four-wheel disc brakes. ...
Page 400
72,000 miles (120,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake linings;...
Page 401
84,000 miles (140,000 km) or 84 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake linings;...
Page 402
96,000 miles (160,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake linings;...
Page 403
108,000 miles (180,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake lining...
Page 404
120,000 miles (200,000 km) or 120 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ replace the engine air cleaner filter. ❏ inspect the brake linings; replace if necessary. ❏ adjust the parking brake on vehicles equipped with four-wheel disc brakes...
Page 405
132,000 miles (220,000 km) or 132 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake lining...
Page 406
144,000 miles (240,000 km) or 144 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate tires. ❏ if using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ inspect the brake lining...
Page 407
† this maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. Warning! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt ab...
Page 409: Contents
If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409 ▫ prepare for the appointment . . . . . . . . . . . . 409 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . 409 ▫ be reasonable wi...
Page 410
䡵 publication order forms . . . . . . . . . . . . . . . . . 413 䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 414 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . . 415 ▫ traction grades . . . . . . . . . . . . . . . . . . . ....
Page 411
Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...
Page 412
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...
Page 413
Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...
Page 414
Warning! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the state of california to cause cancer and birth defects, or other reproductive harm. In addi- tion, certain fluids contained in vehicles and certain products of component wear con...
Page 415
To contact nhtsa, you may either call the auto safety hotline toll free at 1–888–327–4236 (tty: 1–800–424– 9153), or go to http://www.Safercar.Gov; or write to: adminis- trator, nhtsa, 400 seventh street, sw., washington, d.C. 20590. You can also obtain other information about motor vehicle safety f...
Page 416
• diagnostic procedure manuals diagnostic procedure manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer-controlled ve- hicle systems and features. They show exactly how to find...
Page 417
Treadwear the treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relativ...
Page 418
Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...
Page 419: Index
Index 10
Page 420
Abs (anti-lock brake system) . . . . . . . . . . . . . . 269 adding engine coolant (antifreeze) . . . . . . . . . . 360 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 adding washer fluid . . . . . . . . . . . . . . . . . . . . . 356 additives, fuel . . . . . . . . . . . . . . ...
Page 421
Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353 keyless transmitter replacement (rke) . . . . . . . 25 body mechanism lubrication . . . . . . . . . . . . . . . 355 b-pillar location . . . . . . . . . . ...
Page 422
Changing a flat tire . . . . . . . . . . . . . . . . . . . . . 332 chart, tire sizing . . . . . . . . . . . . . . . . . . . . . . . . 281 check engine light (malfunction indicator light) . . . . . . . . . . . . . . . 347 child restraint . . . . . . . . . . . . . . . . . . . . . . . . . . 60 child re...
Page 423
Customer assistance . . . . . . . . . . . . . . . . . . . . . 409 data recorder, event . . . . . . . . . . . . . . . . . . . . . . 58 dealer service . . . . . . . . . . . . . . . . . . . . . . . . . . 349 defroster, rear window . . . . . . . . . . . . . . . . . . . 155 defroster, windshield . . . . ...
Page 424
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341 emission control system maintenance . . . . . . 347,390 engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345 break-in recommendations . . . . . . . . . . . . . . . . 68 checking oil level . . . . . . . . . . . ....
Page 425
Fluids, lubricants and genuine parts . . . . . . . . . . 387 fog lights . . . . . . . . . . . . . . . . . . . . . . . 122,173,380 folding rear seat . . . . . . . . . . . . . . . . . . . . . . . . 118 folding rear seat (sedan) . . . . . . . . . . . . . . . . . . 118 four wheel drive . . . . . . . . ....
Page 426
Gross axle weight rating . . . . . . . . . . . . . . . . . . 317 gross vehicle weight rating . . . . . . . . . . . . . 314,316 hands-free phone (uconnect 威) . . . . . . . . . . . . . . 79 hazard driving through flowing, rising, or shallow standing water . . . . . . . . . . . . . . . . . 263 hazard w...
Page 427
Jack location . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 jack operation . . . . . . . . . . . . . . . . . . . . . . . 332,334 jacking instructions . . . . . . . . . . . . . . . . . . . . . . 334 jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . 338 key, programming . ....
Page 428
Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 high beam indicator . . . . . . . . . . . . . . . . . . . . 165 instrument cluster . . . . . . . . . . . . . . . . . . . . . 121 license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 lights on reminder . . . . . . ....
Page 429
Manual transaxle . . . . . . . . . . . . . . . . . . 251,254,366 downshifting . . . . . . . . . . . . . . . . . . . . . . . . . 255 fluid level check . . . . . . . . . . . . . . . . . . . 367,368 frequency of fluid change . . . . . . . . . . . . 367,368 lubricant selection . . . . . . . . . . . . . ...
Page 430
Operator manual (owner’s manual) . . . . . . . . . . . . 5 outside air intake . . . . . . . . . . . . . . . . . . . . . . . 244 overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259 overheating, engine . . . . . . . . . . . . . . . . . . . 168,330 owner’s manual (operator manual) ....
Page 431
Rear liftgate (sedan) . . . . . . . . . . . . . . . . . . . . . . 34 rear seat, folding . . . . . . . . . . . . . . . . . . . . . . . 118 rear window defroster . . . . . . . . . . . . . . . . . . . 155 rear window features . . . . . . . . . . . . . . . . . . . . 154 rear wiper/washer . . . . . . . ....
Page 432
Adjustable upper shoulder anchorage . . . . . . . . 42 and pregnant women . . . . . . . . . . . . . . . . . . . 48 child restraint . . . . . . . . . . . . . . . . . . . . . . . . . 60 extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 front seat . . . . . . . . . . . . . . . . . ....
Page 433
Speed control (cruise control) . . . . . . . . . . . 131,169 speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 automatic transmission . . . . . . . . . . . . . . . . . 251 engine fails to start . . . . . ....
Page 434
Compact spare . . . . . . . . . . . . . . . . . . . . . . . . 292 flat changing . . . . . . . . . . . . . . . . . . . . . . . . 337 general information . . . . . . . . . . . . . . . . . . . . 288 high speed . . . . . . . . . . . . . . . . . . . . . . . . . . 291 inflation pressures . . . . . . . . ....
Page 435
Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 manual . . . . . . . . . . . . . . . . . . . . . . . . 14,251,254 operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . 259 selection of lubricant . . ....
Page 436
Warranty information . . . . . . . . . . . . . . . . . . . . . 412 washer, adding fluid . . . . . . . . . . . . . . . . . . . . . 356 washers, windshield . . . . . . . . . . . . . . . . . . . . . 128 washing vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 369 water driving through . . . . ...
Page 437
Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be obs...
Page 438
Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be obs...
Page 439
Compass 2009 owner’s manual 2009 comp a s s chrysler llc 81-326-0911 first edition printed in u.S.A..