1. DL manuals
  2. Jeep
  3. Automobile
  4. 2012 Liberty
  5. Owner's Manual

Jeep 2012 Liberty Owner's Manual

Summary of 2012 Liberty

  • Page 1

    Liberty chrysler group llc o w n e r ’ s m a n u a l 2 0 12 l ib e r t y 12kk74-126-aa first edition printed in u.S.A. 2 0 1 2 907708_12_jeep_liberty_om_cover.Indd 1 3/3/11 1:17 pm.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3 understanding the featu...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 5 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 7 䡵 vehicle ide...

  • Page 6

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and ...

  • Page 7

    Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million a...

  • Page 8

    6 introduction.

  • Page 9

    Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...

  • Page 10

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Stamped vin location 8 introduction.

  • Page 11: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 12 ▫ ignition key removal . . . . . . . . . . . . . . . . . . 12 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . 14 䡵 sentry key威 . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 12

    ▫ battery replacement . . . . . . . . . . . . . . . . . . . 25 ▫ general information . . . . . . . . . . . . . . . . . . . 26 䡵 remote starting system — if equipped . . . . . . . 27 ▫ how to use remote start . . . . . . . . . . . . . . . 27 䡵 door locks . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 13

    ▫ seat belts and pregnant women . . . . . . . . . . 58 ▫ seat belt extender . . . . . . . . . . . . . . . . . . . . . 58 ▫ supplemental restraint system (srs) — air bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 ▫ air bag deployment sensors and controls . . . 65 ▫ event data rec...

  • Page 14

    A word about your keys you can insert the double-sided keys into the locks with either side up. The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dea...

  • Page 15

    Note: • for vehicles not equipped with the electronic vehicle information center (evic), features such as the power window switches, radio, power sunroof or sky slider 威 (if equipped), and power outlets will remain active for 45 seconds after the ignition switch is turned to the lock position. Openi...

  • Page 16

    Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be...

  • Page 17

    Is automatic, regardless of whether the vehicle is locked or unlocked. The system uses ignition keys that have an embedded electronic chip (transponder) to prevent unauthorized vehicle operation. Therefore, only keys that are pro- grammed to the vehicle can be used to start and operate the vehicle. ...

  • Page 18

    Replacement keys note: only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a sentry key 威 is programmed to a vehicle, it cannot be programmed to any other vehicle. Caution! Always remove the sentry keys 威 from the vehicle and lock all doors whe...

  • Page 19

    3. Insert the second valid key into the ignition switch. Turn the ignition switch to the on/run position within 15 seconds. After 10 seconds, a chime will sound. In addition, the vehicle security light will begin to flash. Turn the ignition switch to the lock position and remove the second key. 4. I...

  • Page 20

    Vehicle security alarm — if equipped the vehicle security alarm monitors the vehicle doors, liftgate, and liftgate flipper glass for unauthorized entry and ignition for unauthorized operation. While the ve- hicle security alarm is armed, interior switches for door locks and flipper glass are disable...

  • Page 21

    3. Close all doors. The vehicle security light in the instrument cluster will flash rapidly for about 16 seconds to signal that the vehicle security alarm is arming. During this period, opening any door or the liftgate will cancel the arming process. If the vehicle security alarm is set successfully...

  • Page 22

    Illuminated entry the courtesy lights will turn on when you use the remote keyless entry (rke) transmitter to unlock the doors or open any door. This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “mirrors” in “understanding the features of your vehicle” f...

  • Page 23

    To unlock the doors and liftgate press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illumi- nated entry system will also turn on. Remote key...

  • Page 24

    3. Test the feature from outside the vehicle by pressing the lock and unlock buttons on the rke transmitter. 4. Repeat these steps if you want to return this feature to its previous setting. Note: pressing the lock button on the rke transmit- ter while you are inside the vehicle will activate the se...

  • Page 25

    • for vehicles not equipped with the evic, perform the following steps: 1. Press the lock button on a programmed (i.E., func- tional) rke transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the panic button while still holding the lock button. 2. Release both buttons at th...

  • Page 26

    3. Test the feature from outside the vehicle by pressing the lock and unlock buttons on the rke transmitter. 4. Repeat these steps if you want to return this feature to its previous setting. Note: pressing the lock button on the rke transmit- ter while you are inside the vehicle will activate the se...

  • Page 27

    During the panic mode, the door locks and remote keyless entry (rke) system will function normally. Panic mode will not disarm the security system on vehicles so equipped. Note: you may need to be close to the vehicle when using the rke transmitter to turn off the panic alarm due to the radio freque...

  • Page 28

    2. With the rke transmitter buttons facing down, use a flat blade tool to pry the two halves of the rke transmit- ter case apart. Make sure not to damage the seal during removal. 3. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterior...

  • Page 29

    Note: changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. If your rke transmitter fails to operate from a normal distance, check for these two conditions: 1. Weak battery in rke transmitter. The expected ...

  • Page 30

    • battery at an acceptable charge level. • rke panic button not pressed. • system not disabled from previous remote start event • vehicle theft alarm not active warning! • do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon mon- oxide (co) which is odorless...

  • Page 31

    To enter remote start mode press and release the remote start button on the rke transmitter twice within five sec- onds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the remote start mode for a 15-minute cycle...

  • Page 32

    To exit remote start mode and drive the vehicle before the end of the 15-minute cycle, press and release the unlock button on the rke transmitter to unlock the doors and disarm the vehicle security alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the on/run p...

  • Page 33

    Warning! • for personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or wi...

  • Page 34

    If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if ...

  • Page 35

    • for vehicles not equipped with the evic, perform the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between off and on/run and then back to off five times, ending up in the on/run position. 3. Press the power door unlock switch to unlock the...

  • Page 36

    To use the system, open each rear door, use a flat blade screwdriver (or ignition key) and rotate the dial counter- clockwise to engage the child-protection lock and clock- wise to disengage the child-protection locks. When the system on a door is engaged, that door can only be opened by using the o...

  • Page 37

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged. Windows power windows the window controls on the driver’s door trim panel control all the door windows. There are single window co...

  • Page 38

    Warning! Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Auto-down feature the driver’s and front...

  • Page 39

    Auto up feature with anti-pinch protection — if equipped on some models, the driver’s and front passenger’s (if equipped for passenger side) power window switches have an “auto up” feature. Pull the window switch fully upward to the second detent, release, and the window will go up automatically. To...

  • Page 40

    Warning! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Reset it may be necessary at some point in time to reactivate the auto up feature. To do so, perform the following proce- dure: 1. Pull the window switch up to cl...

  • Page 41

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof or sky slider™ (if equipped) in certain open or partially open positions. This is a normal oc...

  • Page 42

    Liftgate to open the liftgate, pull up (squeeze) on the handle and lift. Note: use the power door lock switch on either front door trim panel or the remote keyless entry (rke) transmitter to lock and unlock the liftgate. The manual door locks on the doors and the driver’s door lock cylinder will not...

  • Page 43

    Note: to prevent accidental damage the liftgate flip- per glass will not open if the liftgate is ajar. Make sure the liftgate is fully closed when attempting to open the flipper glass. Warning! To avoid injury, stand back when opening. Glass may automatically rise. Note: if a malfunction to the lift...

  • Page 44

    Occupant restraints some of the most important safety features in your vehicle are the restraint systems: • three-point lap and shoulder belts for all seating positions • advanced front air bags for driver and front passen- ger • supplemental active head restraints (ahr) located on top of the front ...

  • Page 45

    Note: the advanced front air bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on the severity and type of collision. Here are some simple steps you can take to minimize the risk of harm from a deploying air bag: 1. Children 12 years old and u...

  • Page 46

    4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the customer...

  • Page 47

    Buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of in...

  • Page 48

    Warning! (continued) • wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • two ...

  • Page 49

    3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your bel...

  • Page 50

    Warning! (continued) • a belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your s...

  • Page 51

    6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Warning! A frayed or torn belt could rip apart in a collision and leave you with no protecti...

  • Page 52

    The shoulder belt anchorage to be adjusted in the upward position without pressing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position. As a guide, if you are shorter than average, you will prefer a lower...

  • Page 53

    Seat belt lock out the center rear seat belt system has a lock out feature that will not allow you to extract the center webbing unless the rear seat upper latch is engaged. Seat belts in passenger seating positions the seat belts in the passenger seating positions are equipped with automatic lockin...

  • Page 54

    Anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in the rear seat. How to engage the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder por...

  • Page 55

    Warning! • the belt and retractor assembly must be replaced if the seat belt assembly “automatic locking re- tractor (alr)” feature or any other seat belt func- tion is not working properly when checked ac- cording to the procedures in the service manual. • failure to replace the belt and retractor ...

  • Page 56

    How the active head restraints (ahr) work the occupant restraint controller (orc) determines whether the severity, or type of rear impact will require the active head restraints (ahr) to deploy. If a rear impact requires deployment, both the driver and front passenger seat ahrs will be deployed. Whe...

  • Page 57

    Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. Note: for more information on properly adjusting and positi...

  • Page 58

    3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The ahr front soft foam and trim half should lock into the back decorative plastic half. 1 — downward movement 2 — rearward movement 3 — final downward movement to engage locking mechanism 56 thi...

  • Page 59

    Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an authorized dealer. Enhanced seat belt use reminder system (beltalert 姞 ) beltalert 威 is a feature...

  • Page 60

    Unbuckled while traveling at speeds greater than 5 mph (8 km/h), beltalert 威 will provide both audio and visual notification. The front passenger seat beltalert 威 is not active when the front passenger seat is unoccupied. Beltalert 威 may be triggered when an animal or heavy object is on the front pa...

  • Page 61

    Warning! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Supplemental restraint system (srs)...

  • Page 62

    This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the advanced front air bags based upon seat position. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the d...

  • Page 63

    Air bag system components your vehicle may be equipped with the following air bag system components: • occupant restraint controller (orc) • air bag warning light • steering wheel and column • instrument panel • knee impact bolster • driver advanced front air bag • passenger advanced front air bag •...

  • Page 64

    Note: the passenger advanced front air bag may not deploy, even when the driver advanced front air bag has, if the occupant classification system (refer to ⬙oc- cupant classification system ⬙) has determined the pas- senger seat is empty or is occupied by someone that is classified in the ⬙child⬙ si...

  • Page 65

    Warning! (continued) • do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for instal- lation on the vehicle roof. Do not drill into the roof of the vehicle for any...

  • Page 66

    Warning! • if your vehicle is equipped with left and right supplemental side air bag inflatable curtain (sabic), do not stack luggage or other cargo up high enough to block the location of the sabic. The area where the sabic is located should re- main free from any obstructions. • do not use accesso...

  • Page 67

    Along with seat belts and pretensioners, advanced front air bags work with the knee bolsters to provide im- proved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air bag deployment sensors and controls occupant restraint control...

  • Page 68

    Because air bag sensors measure vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an air bag should have deployed. Seat belts are necessary for your protection in all crashes, and also are needed to help keep you in position, away from a...

  • Page 69

    Warning! Ignoring the air bag warning light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have ...

  • Page 70

    “pass air bag off” to show that the passenger advanced front air bag will not inflate during a collision requiring air bag deployment. When the right front passenger seat is empty or when very light objects are placed on the seat, the passenger air bag will not inflate even though the pad indicator ...

  • Page 71

    Warning! Never place a rear facing infant seat in front of an air bag. A deploying passenger advanced front air bag can cause death or serious injury to a child in a rear-facing infant seat. Passenger air bag disable (pad) system front passenger indicator light air bag status adult off on child on o...

  • Page 72

    If there is a fault present in the air bag system, the air bag warning light (a red light located in the center of the instrument cluster directly in front of the driver) will be turned on. This indicates that you should have an autho- rized dealer service the system immediately. The air bag warning...

  • Page 73

    The advanced front air bag gas is vented through the vent holes in the sides of the air bag. In this way, the air bags do not interfere with your control of the vehicle. Along with seat belts and pretensioners, advanced front air bags work with the knee bolsters to provide im- proved protection for ...

  • Page 74

    Warning! If your vehicle is equipped with left and right supplemental side air bag inflatable curtains (sabic), do not stack luggage or other cargo up high enough to block the location of the sabic. The area where the sabic is located should remain free from any obstructions. The front passenger sea...

  • Page 75

    Warning! Unapproved modifications or service procedures to the front passenger seat assembly, its related compo- nents or seat cover may inadvertently change the air bag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is ...

  • Page 76

    If a deployment occurs the advanced front air bags are designed to deflate immediately after deployment. Note: front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision which deploys the air bags, any or al...

  • Page 77

    Do not drive your vehicle after the air bags have de- ployed. If you are involved in another collision, the air bags will not be in place to protect you. Warning! Deployed air bags cannot protect you in another collision. Have the air bags, and seat belt retractor assembly replaced by an authorized ...

  • Page 78

    Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat includ- ing your trim cover and cushion...

  • Page 79

    Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of t...

  • Page 80

    To read data recorded by an edr, special equipment is required, and access to the vehicle or the edr is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the edr. ...

  • Page 81

    Infants and child restraints safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carrie...

  • Page 82

    Remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the latch child restraint anchorage system. Refer to “lower an- chors and tether for ...

  • Page 83

    Warning! • improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • a rearward- facing infant restraint sho...

  • Page 84

    Warning! When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Do not leave it loose in the vehicle. In a sudden stop or accident, it could strike the occupants or seatbacks and cause serious personal injury. Lower anchors and tether for ...

  • Page 85

    If you are installing latch-compatible child restraints in adjacent rear seating positions, you can use the latch anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position. If your child restraints are not latch- compatible, you can...

  • Page 86

    In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusti...

  • Page 87

    Downward into the seat, removing slack in the straps according to the child restraint manufacturer’s instruc- tions. Warning! Improper installation of a child restraint to the latch anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the...

  • Page 88

    Through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a “click.” next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. As the belt retracts, you will hear a ratcheting sound. This indicates the...

  • Page 89

    • route the tether strap to provide the most direct path for the strap between the anchor and the child seat, preferably between the head restraint posts under- neath the head restraint. Warning! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the chil...

  • Page 90

    Engine break-in recommendations a long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While crui...

  • Page 91

    Warning! • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- o...

  • Page 92

    Warning! (continued) • if it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry into the vehicle body is a properly maintained ...

  • Page 93

    Defroster check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor mat safety information always use floor mats designed ...

  • Page 94

    Warning! (continued) • always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Ob- jects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • if required, mounting posts must be properly installed, if not equipped...

  • Page 95: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ▫ inside day/night mirror . . . . . . . . . . . . . . . . 99 ▫ automatic dimming mirror — if equipped . . 100 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . 101 ▫...

  • Page 96

    䡵 voice command — if equipped . . . . . . . . . . . 133 ▫ voice command system operation . . . . . . . . 133 ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . 134 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . 138 䡵 seats . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 97

    ▫ headlights with wipers (available with automatic headlights only) . . . . . . . . . . . . 160 ▫ headlight time delay — if equipped . . . . . . 160 ▫ daytime running lights — if equipped . . . . 161 ▫ lights-on reminder . . . . . . . . . . . . . . . . . . 161 ▫ fog lights — if equipped . . . . . . ...

  • Page 98

    ▫ to deactivate . . . . . . . . . . . . . . . . . . . . . . . 174 ▫ to resume speed . . . . . . . . . . . . . . . . . . . . 174 ▫ to vary the speed setting . . . . . . . . . . . . . . 174 ▫ to accelerate for passing . . . . . . . . . . . . . . 175 䡵 parksense威 rear park assist — if equipped . . . 17...

  • Page 99

    ▫ closing sunroof — express . . . . . . . . . . . . . 194 ▫ closing sunroof — manual mode . . . . . . . . 195 ▫ pinch protect feature . . . . . . . . . . . . . . . . . 195 ▫ pinch protect override . . . . . . . . . . . . . . . . 195 ▫ venting sunroof — express . . . . . . . . . . . . . 195 ▫ sunshad...

  • Page 100

    䡵 rear window features . . . . . . . . . . . . . . . . . . 214 ▫ rear window wiper/washer . . . . . . . . . . . . 214 ▫ rear window defroster . . . . . . . . . . . . . . . . 215 䡵 roof luggage rack — if equipped . . . . . . . . . 216 98 understanding the features of your vehicle.

  • Page 101

    Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicl...

  • Page 102

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activa...

  • Page 103

    Outside mirrors to receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. Note: the passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next...

  • Page 104

    Models with express window feature press and release the mirror select button marked l (left) or r (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection will time out after 30 seconds of inactivity to guard against accidentally ...

  • Page 105

    Sun visor “slide-on-rod” feature — if equipped the sun visor “slide-on-rod” feature allows for addi- tional flexibility in positioning the sun visor to block out the sun. 1. Fold down the sun visor. 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirror to ...

  • Page 106

    For uconnect™ customer support, visit the following websites: • www.Chrysler.Com/uconnect • www.Dodge.Com/uconnect • www.Jeep.Com/uconnect • or call 1–877–855–8400 uconnect™ phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you ...

  • Page 107

    Uconnect™ phone button the radio or steering wheel controls (if equipped) will contain the two control buttons (uconnect™ phone button and voice com- mand button) that will enable you to access the system. When you press the button you will hear the word uconnect™ followed by a beep. The beep is you...

  • Page 108

    • for certain operations, compound commands can be used. For example, instead of saying “setup” and then “pair a device”, the following compound command can be said: “pair a bluetooth 威 device”. • for each feature explanation in this section, only the compound form of the voice command is given. You...

  • Page 109

    To complete the pairing process, you will need to refer- ence your mobile phone owner’s manual. The uconnect™ website may also provide detailed instruc- tions for pairing. The following are general phone to uconnect™ phone pairing instructions: • press the button to begin. • after the “ready” prompt...

  • Page 110

    Dial by saying a number • press the button to begin. • after the “ready” prompt and the following beep, say “dial”. • the system will prompt you to say the number you want to call. • for example, you can say “234-567-8901”. • the uconnect™ phone will confirm the phone number and then dial. The numbe...

  • Page 111

    • after the “ready” prompt and the following beep, say “phonebook new entry”. • when prompted, say the name of the new entry. Use of long names helps the voice command and it is recom- mended. For example, say “robert smith” or “robert” instead of “bob”. • when prompted, enter the number designation...

  • Page 112

    • automatic download and update, if supported, begins as soon as the bluetooth 威 wireless phone connection is made to the uconnect™ phone, for example, after you start the vehicle. • a maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the uconnect™...

  • Page 113

    • next, choose the number designation (home, work, mobile, or other) that you wish to edit. • when prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in ...

  • Page 114

    • note that only the phonebook entry in the current language is deleted. • automatic downloaded phonebook entries cannot be deleted or edited. Delete/erase “all” uconnect™ phonebook entries • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook erase all”. • t...

  • Page 115

    Phone call features the following features can be accessed through the uconnect™ phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the uconnect™ phone. Check with your mobile se...

  • Page 116

    In progress. To go back to the first call, refer to “toggling between calls” in this section. To combine two calls, refer to “conference call” in this section. Place/retrieve a call from hold to put a call on hold, press the button until you hear a single beep. This indicates that the call is on hol...

  • Page 117

    Call termination to end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is ...

  • Page 118

    Uconnect™ phone features language selection to change the language that the uconnect™ phone is using: • press the button to begin. • after the “ready” prompt and the following beep, say the name of the language you wish to switch to english, espanol, or francais. • continue to follow the system prom...

  • Page 119

    Canada and 060 for mexico). The number dialed may not be applicable with the available mobile service and area. • if supported, this number may be programmable on some systems. To do this, press the button and say “setup”, followed by “emergency”. • the uconnect™ phone does slightly lower your chanc...

  • Page 120

    Paging to learn how to page, refer to “working with automated systems”. Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the uconnect™ phone. Voice mail calling to learn how to access your voice mail, refer to “working with automate...

  • Page 121

    The uconnect™ phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. Note: • you may not hear all of the tones due to mobile phone network configurations. This is normal. • some paging and voice mail systems have system time out settings tha...

  • Page 122

    Dialing using the mobile phone keypad you can dial a phone number with your mobile phone keypad and still use the uconnect™ phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired bluetooth 威 mobil...

  • Page 123

    From your uconnect™ phone paired mobile phone to the uconnect™ phone or vice versa, press the button and say “transfer call”. Connect or disconnect link between the uconnect™ phone and mobile phone your mobile phone can be paired with many different electronic devices, but can only be actively “conn...

  • Page 124

    • the selected phone will be used for the next phone call. If the selected phone is not available, the uconnect™ phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete uconnect™ phone paired mobile phones • press the button to ...

  • Page 125

    You can either press the uconnect™ phone button to restore the factory setting or repeat the words and phrases when prompted by the uconnect™ phone. For best results, the voice training session should be com- pleted when the vehicle is parked with the engine running, all windows closed, and the blow...

  • Page 126

    • fully closed windows, • dry weather condition. • even though the system is designed for users speaking in north american english, french, and spanish ac- cents, the system may not always work for some. • when navigating through an automated system such as voice mail, or when sending a page, at the...

  • Page 127

    • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the uconnect™ phone. • echo at the phone far end can sometimes be reduced by lowering the in-veh...

  • Page 128

    Send messages: you can send messages using uconnect™ phone. To send a new message: • press the button. • after the “ready” prompt and the following beep, say “sms send” or “send message.” • you can either say the message you wish to send or say “list messages.” there are 20 preset messages. To send ...

  • Page 129

    13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me turn sms incoming announcement on/off turning the sms incoming announcement off will stop the system from announcing the new incoming...

  • Page 130

    128 understanding the features of your vehicle.

  • Page 131

    3 understanding the features of your vehicle 129.

  • Page 132

    130 understanding the features of your vehicle.

  • Page 133

    Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 3 understa...

  • Page 134

    Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...

  • Page 135

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 136

    If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system is speaking is known as “barging in.” the system will be interrupted, and after the beep, you can add or chan...

  • Page 137

    3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice command system is speaking. Please note the volume setting for voice command is different than the audio system. Main menu start a dialogue by pressing the voice command button. You may say “main menu” t...

  • Page 138

    • “menu radio” (to switch to the radio menu) • “main menu” (to switch to the main menu) satellite radio to switch to satellite radio mode, say “sat” or “satellite radio”. In this mode, you may say the following com- mands: • “channel number” (to change the channel by its spoken number) • “next chann...

  • Page 139

    − “continue” (to continue recording) − “delete” (to delete the recording) • “play memos” (to play previously recorded memos) — during the playback you may press the voice command button to stop playing memos. You proceed by saying one of the following commands: − “repeat” (to repeat a memo) − “next”...

  • Page 140

    Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect™ voice “voice training” feature may be used. 1. Press the voice command button, say “system setup” and once you are in that menu then say “voice training.” this will train your...

  • Page 141

    Driver’s power seat — if equipped the power seat switch is located on the outboard side of the seat near the floor. Use this switch to move the seat up or down, forward or rearward or to tilt the seat. Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push th...

  • Page 142

    Passenger power seat — if equipped vehicle’s equipped with passenger power seats can only be adjusted forward and backward. Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or deat...

  • Page 143

    You can choose from high, low or off heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for high, one for low and none for off. Press the switch once to select high-level heating. Press the switch a second time to select low-l...

  • Page 144

    Manual front seat adjustments for models equipped with manual seats, the driver and passenger seats can be adjusted forward or rearward by using a bar by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the ba...

  • Page 145

    Front seat — manual recline to recline the seatback, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the lever once the seatback is in the upright p...

  • Page 146

    Manual lumbar support — if equipped for models equipped with manual lumbar the support lever is located on the inboard side of the seat. Turn the lever downward to increase and upward to decrease the desired amount of lumbar support. Fold-flat front passenger seat — if equipped this feature allows t...

  • Page 147

    Head restraints head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. Warning! The head restraints for all occupants must be ...

  • Page 148

    To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the adjust- ment button, located at the base of the head restraint, and push downward on the head restraint. For comfort the active head restraints can be tilted forward and backward. To tilt the head ...

  • Page 149

    Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head re...

  • Page 150

    Warning! (continued) • active head restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the ac- tive head restraint ensure that all cargo is se- cured, as loose cargo could contact the active head restraint during sudden st...

  • Page 151

    • refer to “occupant restraints” in “things to know before starting your vehicle” for information on tether routing. Warning! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should be check...

  • Page 152

    2. Pull the release strap (toward the front of the vehicle). 3. Fold the rear seat completely forward. 4. If desired, push down on the seatback to lock it in the folded position. To raise the rear seat note: if interference from the cargo area prevents the seatback from fully locking, you will have ...

  • Page 153

    Recliner adjustment the rear seatback also reclines for additional passenger comfort. Pull the release strap while sitting in the rear seat to recline the seatback. Warning! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you c...

  • Page 154

    Recall either of the two pre-programmed memory profiles by pressing the appropriate side of the switch. Programming the memory feature to create a new memory profile, perform the following: note: saving a new memory profile will erase an existing profile from memory. 1. Turn the ignition on. 2. Adju...

  • Page 155

    3. Press and release the set button on the memory switch, then press the side of the rocker switch labeled (2) within five seconds. The evic, if equipped, will display which memory position is being set. Note: • for vehicles equipped with an automatic transmission, memory profiles can be set without...

  • Page 156

    Note: your rke transmitters can be unlinked to the memory setting by pressing the set button followed by the unlock button on the rke transmitter in step 4 above. Memory position recall note: • for vehicles equipped with an automatic transmission, the vehicle must be in park to recall memory posi- t...

  • Page 157

    Easy entry/exit seat (available with memory seat only) this feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ig...

  • Page 158

    To open and close the hood two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Outside of the vehicle, locate the safety latch lever between the grille and hood opening (left of center when facing hood). Push the safet...

  • Page 159

    Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood. Caution! To prevent possible damage: • before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • lower the hood to a...

  • Page 160

    Lights multifunction lever the multifunction lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instru- ment panel light dimming, interior lights and fog lights (if equipped). Headlights and parking lig...

  • Page 161

    Automatic headlights — if equipped this system automatically turns the headlights on or off according to ambient light levels. To turn the system on, turn the end of the multifunction lever to the auto position (third detent). When the system is on, the headlight time delay feature is also on. This ...

  • Page 162

    Headlights with wipers (available with automatic headlights only) when this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the auto position. In addition, the headlights will turn off when the wipers are ...

  • Page 163

    (evic)/customer-programmable features” in “under- standing your instrument panel” for further information. Daytime running lights — if equipped the headlights will turn on as daytime running lights (drl) and operate at lower intensity whenever the ignition is on, the engine is running, the headlight...

  • Page 164

    Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside l...

  • Page 165

    Note: if the multifunction lever is held in the flash-to- pass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds before activating the flash-to-pass function again. Instrument panel dimmer rotate the center portion of the lever to the extreme bottom pos...

  • Page 166

    Unlock button on the remote keyless entry (rke) transmitter is pressed, or when the dimmer control is turned completely upward to the second detent. Cargo light the cargo light is mounted in the headliner above the rear cargo area. This light will turn on when you open the liftgate or any door, or i...

  • Page 167

    Windshield wiper operation rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper opera- tion. Rotate the end of the lever upward to the third detent past the intermittent settings for high-speed wiper opera- tion. Note: the wipers will automatical...

  • Page 168

    Caution! (continued) • always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur. Intermittent wiper system use th...

  • Page 169

    Note: the wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield washers to use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired (for a maximum of ...

  • Page 170

    Note: the mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid. Rain sensing wipers — if equipped this feature senses moisture on the windshield and automaticall...

  • Page 171

    Note: • the rain-sensing feature will not operate when the wiper speed is in the low or high position. • the rain-sensing feature may not function properly when ice or dried salt water is present on the wind- shield. • use of rain-x威 or products containing wax or silicone may reduce rain sensor perf...

  • Page 172

    • neutral wipe inhibit — the rain-sensing feature will not operate when the ignition is on, and the shift lever is in the neutral position, and the vehicle speed is less than 5 mph (8 km/h), unless the wiper control is moved or the shift lever is moved out of the neutral position. • remote start wip...

  • Page 173

    Tilt steering column this feature allows you to tilt the steering column upward or downward. The tilt control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, push the control handle downward. To tilt the steering column, move the steering ...

  • Page 174

    Tilt/telescoping steering column this feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. To unlock the steering column, pul...

  • Page 175

    Electronic speed control — if equipped when engaged, the electronic speed control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- ...

  • Page 176

    Warning! Leaving the electronic speed control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system off when you are not using it. To set a desired speed turn the elec...

  • Page 177

    Pressing the res (+) button once will result in a 1 mph (2 km/h) increase in set speed. Each subsequent tap of the button results in an increase of 1 mph (2 km/h). To decrease speed while the electronic speed control is set, push the set (-) button. If the button is continually held in the set (-) p...

  • Page 178

    Parksense 姞 rear park assist — if equipped the parksense 威 rear park assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.G. During a parking maneuver. Refer to parksense 威 system usage precautions for limitations of...

  • Page 179

    The parksense 威 warning display is located in the instru- ment cluster’s evic display. It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. Parksense 姞 display when the vehicle is in reverse, the warning display will turn on ...

  • Page 180

    The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the evic display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. Park assist off slow tone 178 understand...

  • Page 181

    The vehicle is close to the obstacle when the evic display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: fast tone continuous tone 3 understanding the features of your vehicle 179.

  • Page 182

    Warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) less than 12 in (30 cm) audible alert chime none single 1/2 second tone slow fast continuous display message park assist on warning object detected warning object detected ...

  • Page 183

    When the parksense 威 switch is pressed to disable the system, the instrument cluster will display the “park assist off” message for approximately five seconds. Refer to “elec- tronic vehicle information center (evic)” in “under- standing your instrument panel” for further information. When the shift...

  • Page 184

    Parksense 姞 system usage precautions note: • ensure that the rear bumper is free of snow, ice, mud, dirt and debris to keep the parksense 威 system operat- ing properly. • jackhammers, large trucks, and other vibrations could affect the performance of parksense 威. • when you turn parksense威 off, the ...

  • Page 185

    Caution! • parksense威 is only a parking aid and it is unable to recognize every obstacle, including small ob- stacles. Parking curbs might be temporarily de- tected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. • the vehic...

  • Page 186

    Warning! (continued) • before using the parksense威 rear park assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles becaus...

  • Page 187

    Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Homelink 威 buttons/overhead consoles homelink 威 buttons/sunvisor/headliner 3 understanding the features of your vehicle 185.

  • Page 188

    Before you begin programming homelink 姞 be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the ...

  • Page 189

    1. Turn the ignition switch to the on/run position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the homelink 威 button you wish to program while keeping the homelink 威 indicator light in view. 3. Simultaneously press and hold both the homelink 威 button you want to program and t...

  • Page 190

    Note: you have 30 seconds in which to initiate the next step after the learn button has been pressed. 6. Return to the vehicle and press the programmed homelink 威 button twice (holding the button for two seconds each time). If the garage door opener/device activates, programming is complete. Note: i...

  • Page 191

    4. Continue to hold both buttons and observe the indi- cator light. The homelink 威 indicator will flash slowly and then rapidly after homelink 威 has received the fre- quency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid. 5. Press and...

  • Page 192

    To pick up the signal during programming. Similar to this canadian law, some u.S. Gate operators are designed to time-out in the same manner. It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage door or gate motor. 1. Turn the ignition switc...

  • Page 193

    Reprogramming a single homelink 威 button to reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the on/run position. 2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the but...

  • Page 194

    Troubleshooting tips if you are having trouble programming homelink 威, here are some of the most common solutions: • replace the battery in the original hand-held transmit- ter. • press the learn button on the garage door opener to complete the training for a rolling code. • did you unplug the devic...

  • Page 195

    General information this device complies with fcc rules part 15 and industry canada rss-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause...

  • Page 196

    Warning! • never leave unattended children in a vehicle with the key in the ignition switch. Occupants, particu- larly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • in a collision, the...

  • Page 197

    Position. The sunroof will close fully and stop automati- cally. This is called “express close”. During express close operation, any movement of the switch will stop the sunroof. Closing sunroof — manual mode to close the sunroof, press and hold the switch in the forward position. Any release of the...

  • Page 198

    Note: the sunshade cannot be closed if the sunroof is open. Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) is in certain open ...

  • Page 199

    Sky slider™ usage precautions note: • the system will not operate when ambient tempera- ture is at –4°f (–20°c) or lower. • the system will not operate at vehicle speeds of 86 mph (138 km/h) or above. • opening and closing the sky slider™ repeatedly with- out the engine running may run the battery d...

  • Page 200

    Warning! Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you: • in an accident, there is a greater risk of being thrown from a vehicle with the sky slider™ open. Always fasten your seat belt properly and make sure all passe...

  • Page 201

    Sky slider™ control the sky slider™ switch is located between the sun visors on the overhead console. Note: the sky slider™ switch will operate when the ignition switch is turned to the on or acc position. Opening the sky slider™ using automatic mode press the switch rearward and release it within o...

  • Page 202

    Using operator mode press the switch rearward and hold it, the sky slider™ will open from the front and move toward the rear of the vehicle. Press the switch forward and hold it, the sky slider™ will open from the rear and move toward the front of the vehicle. Note: during operation, any movement of...

  • Page 203

    Completely. The left motor facing forward will close the top when it is open from the rear of the vehicle. The right motor will close the top when it is open from the front of the vehicle. Anti-pinch protect feature the sky slider™ will retract automatically if it detects an obstruction while closin...

  • Page 204

    Electrical power outlet your vehicle is equipped with a fused 12 volt (13 amp) power outlet. This power outlet is located on the instru- ment panel, below the climate controls. It has power available when the ignition switch is in the on or acc position. Insert the cigar lighter or accessory plug in...

  • Page 205

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 206

    Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • ac...

  • Page 207

    Cupholders there are two cupholders for the front seat passengers, located in the center console. The rear passengers have cupholders at the rear of the center console. Front cupholders rear cupholders 3 understanding the features of your vehicle 205.

  • Page 208

    Storage glove box storage compartment the glove box storage compartment is located on the right side of the instrument panel. Pull outward on the latch to open the storage compartment. Front storage compartment the front storage compartment (located on the left side of the instrument panel) can hold...

  • Page 209

    Console storage compartment to open, press the latch and lift the cover. The center console has a removable storage tray which can hold cell phones, pdas, and other small items. Center console removable storage tray 3 understanding the features of your vehicle 207.

  • Page 210

    Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injur...

  • Page 211

    2. Pull the loops upward and twist them one-quarter turn so that they are parallel to the slots in the storage bin cover. 3. Lift the cover upward over the loops. 4. Turn over the cover and reinstall it. Note: you can install the cover with either side facing upward. 5. With the cover seated in the ...

  • Page 212

    Cargo tie-down hooks and loops the tie-downs located on cargo area floor should be used to secure loads safely when the vehicle is moving. Cargo tie-down loops are located on the trim panels. Cargo tie-down hooks cargo tie-down loops 210 understanding the features of your vehicle.

  • Page 213

    Warning! • cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or accident, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • to help protect against personal in...

  • Page 214

    Warning! (continued) • do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be- come a dangerous projectile in a sudden stop or accident. Retractable cargo area cover — if equipped note: the purpose of this cover is for privacy, not to secure loads. It wi...

  • Page 215

    Then, insert the spring-loaded post on the opposite end of the cover housing into the attachment point on the opposite side of the vehicle. Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) ...

  • Page 216

    Warning! In a collision, a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. D...

  • Page 217

    Rotate the switch upward past the first detent to activate the rear washer. The washer pump will continue to operate as long as the switch is held (for a maximum of 10 seconds). Upon release, the wiper will cycle two times before returning to the set position. If the rear wiper is operating when the...

  • Page 218

    Caution! (continued) • do not use scrapers, sharp instruments, or abra- sive window cleaners on the interior surface of the window. • keep all objects a safe distance from the window. Roof luggage rack — if equipped note: roof rack and crossbars cannot be used on vehicles equipped with skyslider 威. ...

  • Page 219

    Caution! (continued) • long loads, which extend over the windshield, such as wood panels or surfboards, should be secured to both the front and rear of the vehicle. • place a blanket or other protection between the surface of the roof and the load. • travel at reduced speeds and turn corners care- f...

  • Page 221: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 222 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 223 䡵 instrument cluster descriptions . . . . . . . . . . . 224 䡵 electronic vehicle information center (evic) — if equipped . . . ....

  • Page 222

    䡵 media center 230 (req) — am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack) . . . . . . . . . . . . . . . . . . 254 ▫ operating instructions - radio mode . . . . . . 254 ▫ operation instructions - (disc mode for cd and mp3/wma audio play, dvd-video) . . . 262 ▫ notes on playing mp3/wm...

  • Page 223

    䡵 media center 130 with satellite radio (sales code res+rsc). . . . . . . . . . . . . . . . . . . 282 ▫ operating instructions — radio mode . . . . . 283 ▫ operation instructions — cd mode for cd and mp3 audio play . . . . . . . . . . . . . . . . . 289 ▫ notes on playing mp3 files . . . . . . . . . ...

  • Page 224

    Instrument panel features 1 — air outlet 4 — radio 7 — power outlet 2 — instrument cluster 5 — glove compartment 8 — lower switch bank 3 — storage tray 6 — climate control 9 — storage bin (if equipped) 222 understanding your instrument panel.

  • Page 225

    Instrument cluster 4 understanding your instrument panel 223.

  • Page 226

    Instrument cluster descriptions 1. Fuel gauge the fuel gauge shows level of fuel in tank when ignition switch is in the on/run position. 2. Fuel door reminder this symbol indicates the side of the vehicle where the fuel cap is located. 3. Low fuel light this indicator lights when the fuel level drop...

  • Page 227

    Maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped with a tpms malfunction indicator to indicate when the system is not operating properly. The tpms malfunction indicato...

  • Page 228

    5. Electronic throttle control (etc) light this light informs you of a problem with the electronic throttle control (etc) system. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed...

  • Page 229

    Caution! Prolonged driving with the mil on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the mil is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Warning! A malfunctioning catalytic ...

  • Page 230

    If the vehicle electronics sense that the vehicle is driven more than 1 mile (1.6 km) with either turn signal on, a continuous chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb. 11. Electronic stability contro...

  • Page 231

    The charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain service immediately. See an autho- rized dealer. If jump starting is required, refer to “jump starting procedures” in “what to do in emergencies”. 13. Oil pressure warning light...

  • Page 232

    Green area, you are driving the vehicle in a fuel efficient manner. Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage. 16. 4wd low indicator — if equipped this light alerts the driver that the vehicle is in the 4wd low mode. In this mode, the front drivesha...

  • Page 233

    21. Serv (service) 4wd indicator light — if equipped the “serv 4wd indicator light” will turn on when the ignition key is turned to the on/ run position and it will stay on for two seconds. If the light stays on or turns on during driving, it means that the 4wd system is not functioning properly and...

  • Page 234

    Caution! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “h” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “h” and you hear cont...

  • Page 235

    Caution! Continuous driving with the transmission tempera- ture warning light illuminated will eventually cause severe transmission damage or transmission failure. Warning! If the transmission temperature warning light is illuminated and you continue operating the vehicle, in some circumstances you ...

  • Page 236

    Torque split of 42% front axle and 58% rear axle. It can redirect up to 100% of torque to the front or rear axle, if necessary. 27. Odometer display/trip odometer display the odometer display shows the total distance the ve- hicle has been driven. The trip odometer shows indi- vidual trip mileage. R...

  • Page 237

    Center (evic) messages when the appropriate conditions exist. Refer to electronic vehicle information center (evic) for further information. Eco / eco-on (fuel saver indicator) — if equipped the eco-on indicator will illuminate when you are driving in a fuel efficient manner and can be used to modif...

  • Page 238

    Change oil message (base and mid line clusters only) your vehicle is equipped with an engine oil change indicator system. The “change oil” message will flash in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change int...

  • Page 239

    The driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the seat belt warning light will flash or remain on continuously. Refer to “occupant restraints” in “things to know before starting your vehicle” for further info...

  • Page 240

    If brake failure is indicated, immediate repair is neces- sary. Warning! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. Vehicles equipped ...

  • Page 241

    33. Air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to on/run. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. R...

  • Page 242

    This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The evic consists of the following: • compass heading (n, s, e, w, ne, nw, se, sw) • outside temperature (°f or °c) • audio information/eco display • fuel econ...

  • Page 243

    Menu button press and release the menu button to advance the display to each of the evic main menu features. Upon reaching the last item in the main menu the evic will advance to the first item in the main menu with the next menu button press and release. Down button press and release the down butto...

  • Page 244

    • left rear turn signal lamp out (with a single chime) • right front turn signal lamp out (with a single chime) • right rear turn signal lamp out (with a single chime) • key fob battery low (with a single chime) • memory #1/#2 profile set • memory #1/#2 profile recall • memory system disabled – vehi...

  • Page 245

    • service tpm system (with a single chime). Refer to “tire pressure monitoring system” in “starting and operating”. • check gascap (refer to “adding fuel” in “starting and operating” for more details) • service park assist system (with a single chime) • oil change required (with a single chime) • ec...

  • Page 246

    Evic main menu to step to each main menu feature press and release the menu button once for each step. A step from the last item in the list will cause the first item in the feature list to be displayed. The following features are in the main menu: • compass, outside temperature, and audio informati...

  • Page 247

    And audio information (if the radio is on)/eco if the evic display is not already displaying this screen. Note: the system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated tempera- ture is displayed. Engine tempera...

  • Page 248

    Manual compass calibration if the compass appears erratic and the “cal” indicator does not appear in the evic display, you must put the compass into the calibration mode manually as follows: 1. Start the engine. Leave the shift lever in park in order to enter the evic programming menus. 2. Press the...

  • Page 249

    To change the compass variance: 1. Turn the ignition switch on. 2. Press the menu button until the personal settings (customer-programmable features) menu displays in the evic. 3. Press the down button until “compass variance” displays in the evic. 4. Press and release the select button until the pr...

  • Page 250

    Distance to empty (dte) shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. Dte cannot be reset. Note: significant c...

  • Page 251

    Elapsed time shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the run or start position. Elapsed time is displayed as follows: hours:minutes:seconds elapsed time can be reset by pressing and holding the select button (as prompted...

  • Page 252

    Use the down button to display one of the following choices: language when in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the select button while in this display to select english, espan...

  • Page 253

    Button until “on” or “off” appears. Refer to “driver memory seat” in “understanding the features of your vehicle” for more information. Sound horn with lock when on is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be selected with or withou...

  • Page 254

    Note: turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to “lights” in “understanding the features of your vehicle.” easy exit seat — if equipped this feature provides automatic driver seat positioning to enhance driver mobility...

  • Page 255

    Make your selection, press and release the select button. Refer to “rear park assist system” in “under- standing the features of your vehicle” for system func- tion and operating information. Hill start assist (hsa) — if equipped when on is selected, the hsa system is active. Refer to “electronic br...

  • Page 256

    Media center 230 (req) — am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions - radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power s...

  • Page 257

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 258

    If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with uconnect phone” message will display on the radio screen. Time button press the time button to alternate locations of the time and frequency display. Clock setting procedure 1. Press and hold ...

  • Page 259

    Tune control turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decrease the frequency. Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decreas...

  • Page 260

    Toggle the music type button to select the following format types: program type 16-digit character display no program type or undefined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news n...

  • Page 261

    If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the preset station. Setup button pressing the setup button allows you to select between the following items: note: turn the tune/scroll control knob to scroll th...

  • Page 262

    • ves™ power - allows you to turn ves™ on and off (if equipped). • ves™ lock - locks out rear ves™ remote controls (if equipped). • ves™ ch1/ch2 - allows the user to change the mode of either the ir1 or ir2 wireless headphones by pressing the audio/select button (if equipped). • set home clock - pre...

  • Page 263

    Subtitle language — if equipped selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting ⬙other.⬙ enter the country code using the tune/scroll control knob to s...

  • Page 264

    And press and release that button. If a button is not selected within five seconds after pressing the set but- ton, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to each pushbutton by repeating the above procedure with this exception: p...

  • Page 265

    Caution! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “disc hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the dvd player and other radio internal components. Note: the ignition switch m...

  • Page 266

    The disc can be ejected with the radio and ignition off. Seek button (cd mode) press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the fi...

  • Page 267

    Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded using formats other than iso 9660 level 1 and level 2, the radio may fail to read files properly and may be unable to play...

  • Page 268

    When using the mp3/wma encoder to compress audio data to an mp3/wma file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (vbr) are also supported. The majority of mp3/wma files use a 44.1 khz sampling rate and a 192, 160, 128, 96 or vbr bi...

  • Page 269

    Loading times for playback of mp3/wma files may be affected by the following: • media - cd-rw media may take longer to load than cd-r media • medium formats - multisession discs may take longer to load than non-multisession discs • number of files and folders - loading times will increase with more ...

  • Page 270

    Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3/wma player, cassette player, or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pre...

  • Page 271

    Operating instructions - uconnect™ phone (if equipped) refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd for further details. Operating instructions - video entertainment system (ves)™ (if equipped) refer to “video entertainment system (ves)™” for fur- ther details. Dolby 威 ...

  • Page 272

    System activation sirius satellite radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, includ...

  • Page 273

    Bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or...

  • Page 274

    Info button pressing the info button will cycle the display informa- tion between artist, song title, and composer (if avail- able). Also, pressing and holding the info button for an additional three seconds will make the radio display the song title all of the time (press and hold again to return t...

  • Page 275

    Setup button pressing the setup button allows you to select the following items: • display sirius id number — press the audio/ select button to display the sirius id number. This number is used to activate, deactivate, or change the sirius subscription. Set button – to set the pushbutton memory when...

  • Page 276

    Operating instructions (voice command system) — if equipped refer to “voice command” in the uconnect™ user manual located on the dvd for further details. Operating instructions (uconnect™ phone) — if equipped refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd for further deta...

  • Page 277

    Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume control the electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the ...

  • Page 278

    Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either am or fm frequencies. Tune control turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decre...

  • Page 279

    Set/rnd button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, press the set/rnd button. The symbol set 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button...

  • Page 280

    Inserting compact disc(s) gently insert one cd into the cd player with the cd label facing up. The cd will automatically be pulled into the cd player and the cd icon will illuminate on the radio display. If a cd does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and mu...

  • Page 281

    Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pressing and holding the seek ...

  • Page 282

    Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded using formats other than iso 9660 level 1 and level 2, the radio may fail to read files properly and may be unable to play...

  • Page 283

    Extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to compress audio data to an mp3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rat...

  • Page 284

    • number of files and folders - loading times will increase with more files and folders to increase the speed of disc loading, it is recommended to use cd-r media and single-session discs. To create a single-session disc, enable the “disc at once” option before writing to the disc. Operation instruc...

  • Page 285

    Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...

  • Page 286

    Voice command system (radio) — if equipped refer to “voice command” in “understanding the fea- tures of your vehicle”. Voice command button uconnect™ phone — if equipped press this button to operate the uconnect™ phone feature (if equipped). Refer to “uconnect™ phone” in “under- standing the feature...

  • Page 287

    4. Adjust the minutes using the right side tune/ scroll control knob. Press the tune/scroll control knob to save time change. 5. To exit, press any button/knob or wait five seconds. The clock can also be set by pressing the setup button. For vehicles equipped with satellite radio, press the setup bu...

  • Page 288

    Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the right or left to increase or decrease the treble tones. Push the rotary tune/scroll control knob a fourth time and balance will display. Turn the tune/ scroll control knob to the r...

  • Page 289

    Program type 16-digit character display news news nostalgia nostalga oldies oldies personality persnlty public public rhythm and blues r & b religious music rel musc religious talk rel talk rock rock soft soft soft rock soft rck soft rhythm and blues soft r&b sports sports talk talk top 40 top 40 we...

  • Page 290

    The minutes using the right side tune/scroll control knob. Press the tune/scroll control knob to save time change. Am/fm button press the button to select either am or fm mode. Set/rnd button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory...

  • Page 291

    Operation instructions — cd mode for cd and mp3 audio play note: • the ignition switch must be in the on or acc position to operate the radio. • this radio is capable of playing compact discs (cd), recordable compact discs (cd-r), rewritable compact discs (cd-rw), compact discs with mp3 tracks and m...

  • Page 292

    If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the cd is not removed, the radio will reinsert the cd but will not play it. A disc can be ejected with the radio and ignition off. Note: ejecting with the ignition off is not allowed on convertible or soft-...

  • Page 293

    Notes on playing mp3 files the radio can play mp3 files; however, acceptable mp3 file recording media and formats are limited. When writing mp3 files, pay attention to the following restric- tions. Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw...

  • Page 294

    Discs created with an option such as ⬙keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for cd audio or mp3 playback may result in longer disc loading times. Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 file...

  • Page 295

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 296

    Press and hold the info button again for three seconds to return to ⬙elapsed time⬙ display. Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s au...

  • Page 297

    Radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the sirius web site at www.Sirius.Com, or at www- .Siriuscanada.Ca for ...

  • Page 298

    Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or under a physical obstacle. • dense tree coverage may interrupt reception in the form of short audio mutes. • driving under wide bridges or alon...

  • Page 299

    Additional three seconds will make the radio display the song title all of the time (press and hold again to return to normal display). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next channel in the direction of the arrows. Tune control (rotary) tu...

  • Page 300

    Set button – to set the pushbutton memory when you are receiving a channel that you wish to commit to pushbutton memory, press the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a butt...

  • Page 301

    The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. Pressing the center button will ...

  • Page 302

    Cd player pressing the top of the switch once will go to the next track on the cd. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous track if it is within one second after the current track begins to play. If you press the switc...

  • Page 303

    Note: if you experience difficulty in playing a particu- lar disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. Radio operation and mobile pho...

  • Page 304

    Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “o” (off) position. There are seven blower speeds. Temperature control rotate this control to regulate the te...

  • Page 305

    Panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear. Bi-level air is directed through the p...

  • Page 306

    Note: • the air conditioning compressor operates in mix, defrost, or a blend of these modes, even if the air conditioning (a/c) button is not pressed. This dehu- midifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary. • for information on operating ...

  • Page 307

    Air conditioning control press this button to engage the air conditioning. A light will illuminate when the air conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer tem- peratures...

  • Page 308

    Operation of the system is quite simple. 1. Turn the mode control knob (on the right) and the blower control knob (on the left) to auto. Note: the auto position performs best for front seat occupants only. 2. Dial in the temperature you would like the system to maintain by rotating the temperature c...

  • Page 309

    • if your air conditioning performance seems lower than expected, check the front of the a/c condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduc...

  • Page 310

    308 understanding your instrument panel.

  • Page 311

    The operator can override the auto mode setting to change airflow distribution by rotating the mode control knob (on the right) to one of the following positions. • panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center in...

  • Page 312

    • air conditioner control press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control dial. Press this but- ton a second time to turn off the air conditionin...

  • Page 313

    • most of the time, when in automatic operation, you can temporarily put the system into recirculation mode by pressing the recirculation button. However, under certain conditions, while in automatic mode, the system is blowing air out the defrost vents. When these conditions are present, and the re...

  • Page 314

    Window fogging interior fogging on the windshield can be quickly re- moved by turning the mode selector to defrost. The defrost/floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed. Vehicle windows ten...

  • Page 315

    Control setting suggestions for various weather conditions 4 understanding your instrument panel 313.

  • Page 317: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 319 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 319 ▫ extreme cold weather (below –20°f or –29°c) . . . . . . . . . . . . . . . . 320 ▫ if engine fails to start . . . . . . . . . . . . . . ....

  • Page 318

    䡵 off-road driving tips . . . . . . . . . . . . . . . . . . 345 ▫ when to use 4wd low range . . . . . . . . . . 345 ▫ driving through water . . . . . . . . . . . . . . . . 345 ▫ driving in snow, mud and sand . . . . . . . . . 346 ▫ hill climbing . . . . . . . . . . . . . . . . . . . . . . . 347 ▫ tr...

  • Page 319

    䡵 tires — general information . . . . . . . . . . . . . 377 ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . 377 ▫ tire inflation pressures . . . . . . . . . . . . . . . . 378 ▫ tire pressures for high speed operation . . . 380 ▫ radial-ply tires . . . . . . . . . . . . . . . . . . . . ...

  • Page 320

    ▫ fuel system cautions . . . . . . . . . . . . . . . . . 402 ▫ carbon monoxide warnings . . . . . . . . . . . . 403 䡵 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . 404 ▫ fuel filler cap (gas cap) . . . . . . . . . . . . . . 404 ▫ loose fuel filler cap message . . . . . . . . . . . 40...

  • Page 321

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or with access to...

  • Page 322

    Turn the ignition switch to the start position and release when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the lock position, wait 10 to 15 seconds, then repeat the “normal starting” procedure. Tip start feature turn the ignition switch to start po...

  • Page 323

    With tip start if the engine fails to start after you have followed the “normal starting” or “extreme cold weather” proce- dures, it may be flooded. To clear any excess fuel, press the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the start position and re...

  • Page 324

    Automatic transmission caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle spee...

  • Page 325

    Warning! (continued) • never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking bra...

  • Page 326

    Four–speed automatic transmission the shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of the park position (refer to “brake/transmission shift interlock system” in this section). ...

  • Page 327

    Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use park while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the ...

  • Page 328

    Warning! (continued) • it is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone ...

  • Page 329

    Warning! (continued) • never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking bra...

  • Page 330

    Reverse this range is for moving the vehicle backward. Shift into reverse only after the vehicle has come to a complete stop. Neutral use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Set the parking brake and shift th...

  • Page 331

    When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading condi- tions, in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the tow/haul mode, or select the ⬙2⬙ range at lower speeds. Under these conditions, using tow/haul...

  • Page 332

    1 (first) this range is used for hard pulling at low speeds in mud, sand, snow, or on steep grades. Begins and stays in low gear with no upshift. Provides engine compression brak- ing at low speeds. Transmission limp home mode transmission function is monitored electronically for abnormal conditions...

  • Page 333

    If the transmission cannot be reset, authorized dealer service is required. Overdrive operation the automatic transmission includes an electronically controlled overdrive (fourth gear). The transmission will automatically shift into the overdrive gear if the follow- ing conditions are present: • the...

  • Page 334

    Note: tow/haul mode locks out overdrive. The “tow/haul indicator light” will illuminate in the instrument cluster to indicate that tow/haul mode has been activated. Pressing the switch a second time restores normal operation. If the tow/haul mode is desired, the switch must be pressed each time the ...

  • Page 335

    Four-wheel drive operation command-trac ii 姞 transfer case – if equipped operating information and precautions the command-trac ii 威 transfer case provides four posi- tions: • two–wheel drive (2wd) high range • four-wheel drive (4wd lock) high range • four-wheel drive (4wd low) low range • neutral (...

  • Page 336

    Caution! (continued) • the 4wd lock position and 4wd low position are intended for loose or slippery road surfaces only. Driving in these positions on dry hard- surfaced roads may cause increased tire wear and damage to the driveline components. • when operating your vehicle in 4wd low, the engine s...

  • Page 337

    Warning! (continued) • since four-wheel drive provides improved trac- tion, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road con- ditions permit. You or others could be injured. Shift positions the transfer case switch is located on the center console next t...

  • Page 338

    4wd lock four-wheel drive high range - this range locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction for loose or slippery road surfaces only. 4wd low four-wheel drive low range - this range provides low speed fo...

  • Page 339

    Shifting procedures note: if any of the requirements to select a new transfer case position have not been met, the transfer case will not shift, the indicator light for the previous position will remain on, and the newly selected position indicator light will continue to flash until all the requirem...

  • Page 340

    Shifting can be performed with the vehicle rolling 2 to 3 mph (3 to 5 km/h) using the “preferred procedure” or completely stopped using the “alternate procedure.” preferred procedure 1. With the engine running, slow the vehicle speed to 2 to 3 mph (3 to 5 km/h). 2. Shift the transmission into neutra...

  • Page 341

    Selec-trac 姞 ii transfer case – if equipped operating information and precautions the selec-trac 威 ii active on-demand transfer case pro- vides four positions: • two-wheel drive (2wd) high range • four-wheel drive auto (4wd auto) high range • neutral (n) • four-wheel drive (4wd low) low range this t...

  • Page 342

    Caution! (continued) • when operating your vehicle in 4wd low, the engine speed is approximately three times that of the 2wd position or 4wd auto position at a given road speed. Take care not to over-speed the engine and do not exceed 25 mph (40 km/h). • proper operation of four-wheel drive vehicles...

  • Page 343

    Warning! (continued) • since four-wheel drive provides improved trac- tion, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road con- ditions permit. You or others could be injured. Shift positions the transfer case switch is located on the center console next t...

  • Page 344

    4wd auto four-wheel drive auto high range – this active on- demand range makes available optimum traction for a wide range of conditions, while maximizing driver con- venience. This position is always in four-wheel drive mode, with a normal 42% front axle, 58% rear axle torque split. The system also...

  • Page 345

    Note: the “serv 4wd warning light” monitors the electric shift four-wheel drive system. If this light re- mains on after engine start up, or it illuminates during driving, it means that the four-wheel drive system is not functioning properly and that service is required. Shifting procedures note: if...

  • Page 346

    3. While still rolling, move the transfer case switch to the desired position. 4. After the desired position indicator light is on (not flashing), shift the transmission into gear. Alternate procedure 1. Bring the vehicle to a complete stop. 2. With the ignition switch in the on position and the eng...

  • Page 347

    They are not designed for cornering at the same speeds as conventional two-wheel drive vehicles any more than low-slung sports cars are designed to perform satisfacto- rily in off-road conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this type, failure...

  • Page 348

    Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. If you must drive through water, try to determine the depth and the bottom condition (and location of any obstacles) prior to entering. Proceed with caution ...

  • Page 349

    Lower gear than necessary to maintain headway. Over- revving the engine can spin the wheels and traction will be lost. Avoid abrupt downshifts on icy or slippery roads be- cause engine braking may cause skidding and loss of control. Hill climbing note: before attempting to climb a hill, determine th...

  • Page 350

    Turning the front wheels slowly left and right. This may provide a fresh “bite” into the surface and will usually provide traction to complete the climb. Traction downhill shift the transmission into a low gear and the transfer case to 4wd low range. Let the vehicle go slowly down the hill with all ...

  • Page 351

    • after extended operation in mud, sand, water, or similar dirty conditions, have the radiator, fan, brake rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible. Warning! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. ...

  • Page 352

    System. This noise should be considered normal, and it does not in any way damage the steering system. Warning! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Caution! Prolonged operation of the ...

  • Page 353

    If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Parking brake before leaving the vehicle, make sure that the parking...

  • Page 354

    Note: • when the parking brake is applied and the transmis- sion is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • this light only shows that the park...

  • Page 355

    Warning! (continued) • be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision. • always fully apply the parking brake when leav- ing your vehicle or it may roll and cause damage or injury. Also, be certain to leave the transmission in...

  • Page 356

    The abs conducts a low-speed self-test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement. The movement can be more apparent on ice and snow. This is normal. The abs pump motor runs during the self-test at 12 mph (20...

  • Page 357

    Caution! The abs is subject to possible detrimental effects of electronic interference caused by improperly in- stalled aftermarket radios or telephones. Note: during severe braking conditions, a pulsing sensation may occur and a clicking noise will be heard. This is normal, indicating that the abs ...

  • Page 358

    System includes anti-lock brake system (abs), traction control system (tcs), brake assist system (bas), hill start assist (hsa), electronic roll mitigation (erm), and electronic stability control (esc). These systems work together to enhance both vehicle stability and control in various driving cond...

  • Page 359

    A limited slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remai...

  • Page 360

    Electronic roll mitigation (erm) this system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When erm determines that the rate of change of the steering wheel angle and vehicle’s speed are sufficient to potentially cause wheel li...

  • Page 361

    Time expires, the system will release brake pressure and the vehicle will roll down the hill as normal. The system will release brake pressure in proportion to amount of throttle applied. The following conditions must be met in order for hsa to activate: • the vehicle must be stopped. • the vehicle ...

  • Page 362

    Warning! • if you use a trailer brake controller with your trailer, the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released. In order to avoid rolling ...

  • Page 363

    3. Apply the parking brake. 4. Start the engine. 5. Rotate the steering wheel one-half turn to the left. 6. Press the “esc off” button located in the lower switch bank below the climate control four times within twenty seconds. The “esc off indicator light” should turn on and turn off two times. 7. ...

  • Page 364

    Hdc control speed. If more speed is desired during hdc control, the accelerator pedal will increase vehicle speed in the usual manner. When either the brake or the accelerator is released, hdc will control the vehicle at the original set speed. Note: hdc is available on vehicles equipped with the mp...

  • Page 365

    2. Press the “hill descent” button. The “hill descent control indicator light” in the instrument cluster will turn on solid. Note: if the transfer case is not in 4wd low range, the “hill descent control indicator light” will flash for five seconds and hdc will not be enabled. Disabling hdc 1. Press ...

  • Page 366

    Light” also flashes when the tcs is active. If the “esc activation/malfunction indicator light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. Warning! The electronic...

  • Page 367

    Partial off – two-wheel drive vehicles and four-wheel drive vehicles in 2wd and 4wd high range the “partial off” mode is intended for driving in deep snow, sand, or gravel. This mode raises the threshold for tcs and esc activation, which allows for more wheel spin than what esc normally allows. The ...

  • Page 368

    In this mode, esc and tcs are turned off (except for the “limited slip” feature described in the tcs section) until the vehicle reaches a speed of 40 mph (64 km/k). At speeds over 40 mph (64 km/k), the system automatically switches to “partial off” mode, described above. When the vehicle speed retur...

  • Page 369

    Light” comes on continuously with the engine running, a malfunction has been detected in the esc system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your autho- rized dealer as soon as...

  • Page 370

    Tire safety information tire markings note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standar...

  • Page 371

    Compact spare tires have the letter “t” or “s” molded into the sidewall preceding the size designation. Ex- ample: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 r15 lt. Tire sizing chart...

  • Page 372

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 373

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 374

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or ...

  • Page 375

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Tire and loading information placard tire placard location tire and loading information placa...

  • Page 376

    This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. Loading the vehicle maximum load on the ...

  • Page 377

    3. Subtract the combined weight of the driver and pas- sengers from xxx lbs or xxx kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the ...

  • Page 378

    376 starting and operating.

  • Page 379

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 380

    Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...

  • Page 381

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflation pressure...

  • Page 382

    Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...

  • Page 383

    Vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equip- ment tire and wheel as a spare, a non-matching tempo- rary emergency use spare may be equipped with your vehicle. Temporary u...

  • Page 384

    Warning! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnin...

  • Page 385

    Warning! Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your tire and loading info...

  • Page 386

    Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...

  • Page 387

    • distance driven warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a co...

  • Page 388

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 389

    Caution! To avoid damage to your vehicle, tires, or chains, observe the following precautions: • do not use tire chains on vehicles equipped with tires other than p225/75r16 or smaller tires. There may not be adequate clearance for the chains and you are risking structural or body damage to your veh...

  • Page 390

    These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. Tire rotation recommendations the tires on the front and rear of your vehicle operate at different loads and perform different steering, handling, and braking functions. For these reasons, they wear at un...

  • Page 391

    Caution! Proper operation of four-wheel drive vehicles de- pends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear. Tire pressure monitor system (tpms) the ti...

  • Page 392

    Cold placard pressure in order for the “tire pressure monitoring telltale light” to turn off. The system will automatically update and the “tire pressure monitoring telltale light” will turn off once the system receives the updated tire pressures. The vehicle may need to be driven for up to 20 minut...

  • Page 393

    Caution! (continued) • after inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the tire pressure moni- toring sensor. Note: • the tpms is not intended to replace normal tire care and ma...

  • Page 394

    The tpms consists of the following components: • receiver module • four tire pressure monitoring sensors • tire pressure monitoring telltale light the matching full-size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The matching full-size spare can be used in pla...

  • Page 395

    Service tpms warning when a system fault is detected, the “tire pressure monitoring telltale light” will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exis...

  • Page 396

    2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, a chime will sound and the “tpms telltale light” and “low tire pressure” message will turn on upon the next ignition key cycle. 3. After driving the vehicle for up to 20 minutes...

  • Page 397

    • three trigger modules (mounted in three of the four wheel-wells) • various tire pressure monitoring system messages, which display in the electronic vehicle information center (evic) • tire pressure monitoring telltale light the matching full size spare wheel and tire assembly (if equipped) has a ...

  • Page 398

    Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the evic graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display...

  • Page 399

    If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the “tire pressure monitoring telltale light” will no longer flash, and the “service tpm system message will no longer display, and a pressure value will display i...

  • Page 400

    Vehicles with compact spare 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the tpms will not monitor the pressure in the compact spare tire. 2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limi...

  • Page 401

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept any interference received, including interference that may cause undesi...

  • Page 402

    Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the world- wide fuel charter, wwfc) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recom- mends the use of gasoline ...

  • Page 403

    E-85 usage in non-flex fuel vehicles non-ffv vehicles are compatible with gasoline contain- ing 10% ethanol (e10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all of these symptoms: • ...

  • Page 404

    Of gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline retailer whether the gasoline contains mmt. It is even more important to look for gasolines without mmt in canada, because mmt can be used at levels higher than those allowed in the united states. Mmt is p...

  • Page 405

    Caution! (continued) • the use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentra- tions of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the respon...

  • Page 406

    Warning! (continued) • guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly. Until repaired, drive with all side windows fully open. • keep the liftgate closed when driving your veh...

  • Page 407

    Caution! • damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “malfunction indi- cator light (mil)” to illuminate, due to f...

  • Page 408

    • if the gas cap is not tightened properly, the mil will come on. Be sure the gas cap is tightened every time the vehicle is refueled. Loose fuel filler cap message if the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a gascap” message will...

  • Page 409

    Gross vehicle weight rating (gvwr) the gvwr is the total permissible weight of your vehicle including driver, passengers, vehicle, options, trailer tongue weight, and cargo. The label also specifies maxi- mum capacities of front and rear axle systems (gawr). Total load must be limited, so gvwr, and ...

  • Page 410

    Capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are added. Loading the actual total weight and the weight of the front and rear of your vehic...

  • Page 411

    Trailer towing in this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow ...

  • Page 412

    Warning! If the gross trailer weight (gtw) is 3,500 lbs (1 587 kg) or more, it is mandatory to use a weight- distributing hitch to ensure stable handling of your vehicle. If you use a standard weight- carrying hitch, you could lose control of your vehicle and cause a collision. Gross combination wei...

  • Page 413

    Trailer sway control – mechanical the trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. ...

  • Page 414

    Warning! • an improperly adjusted weight distributing hitch system may reduce handling, stability, brak- ing performance, and could result in a collision. • weight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable ...

  • Page 415

    With weight distributing hitch (correct) improper adjustment of weight-distributing hitch (incorrect) 5 starting and operating 413.

  • Page 416

    Trailer hitch classification your vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional trailer tow prep pack...

  • Page 417

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ transmission model frontal area max. Gtw (gross trailer wt.) max. Tongue wt. (see note) 3.7l/automatic 4x2 32 sq ft (2.97 sq m) 2,000 lbs...

  • Page 418

    When towing trailers with gross trailer weight (gtw) between 3,500 lbs (1 588 kg) and 5,000 lbs (2 268 kg) the following chart provides maximum trailer weight ratings towable for the following engine/transmission combinations, only if using a weight distributing hitch. Engine/ transmission model fro...

  • Page 419

    Trailer and tongue weight always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the gross trailer weight (gtw) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to s...

  • Page 420

    Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the “tire and loading information” placard for the ma...

  • Page 421

    Warning! (continued) • make certain that the load is secured in the trailer and that is will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a coll...

  • Page 422

    Towing requirements – tires − do not attempt to tow a trailer while using a compact spare tire. − proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “tires – general information” in “starting and oper- ating” for information on tire pressur...

  • Page 423

    Caution! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Warning! • do not connect trailer brak...

  • Page 424

    The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground...

  • Page 425

    Towing tips before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. Automatic transmission the “drive” range can be selected when towing. How- ever, if frequent shifting occurs while in this range, activate the tow/haul feature. R...

  • Page 426

    Cooling system to reduce potential for engine and transmission over- heating, take the following actions: − city driving when stopped for short periods of time, shift the trans- mission into neutral and increase engine idle speed. − highway driving reduce speed. − air conditioning turn off temporari...

  • Page 427

    Recreational towing — two-wheel drive models recreational towing is allowed only if the rear wheels are off the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly man...

  • Page 428

    Caution! Towing with the rear wheels on the ground (while the driveshaft is connected) will cause severe trans- mission damage. Damage from improper towing is not covered under the new vehicle limited war- ranty. Recreational towing — four-wheel drive models the transfer case must be shifted into ne...

  • Page 429

    Caution! (continued) • do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. Shifting into neutral (n) warning! You or others could be injured if you leave the vehicle unattended with the transfer case in the neutral (n) position without first fully engag...

  • Page 430

    6. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case neutral (n) button (located above the selector switch) for four sec- onds, until the light behind the neutral (n) symbol starts to blink, indicating shift in progress. The light will stop blinking (sta...

  • Page 431

    Caution! Damage to the transmission may occur if the trans- mission is shifted into park with the transfer case in neutral (n) and the engine running. With the transfer case in neutral (n) ensure that the engine is off prior to shifting the transmission into park. 14. Attach the vehicle to the tow v...

  • Page 432

    3. Turn the ignition switch to the on/run position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into neutral. 6. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case neutral (n) button (located above the selecto...

  • Page 433

    Note: when shifting out of transfer case neutral (n), turning the engine off may be required to avoid gear clash. 9. Shift the transmission into park. 10. Release the brake pedal. 11. Disconnect vehicle from the tow vehicle. 12. Start the engine. 13. Press and hold the brake pedal. 14. Release the p...

  • Page 435: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . . . . . . 434 䡵 if your engine overheats . . . . . . . . . . . . . . . . 434 䡵 jacking and tire changing . . . . . . . . . . . . . . . 435 ▫ jack location . . . . . . . . . . . . . . . . . . . . . . . 436 ▫ spare tire...

  • Page 436

    Hazard warning flashers the hazard warning flasher switch is located in the switch bank below the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press...

  • Page 437

    Note: there are steps that you can take to slow down an impending overheat condition: • if your air conditioner (a/c) is on, turn it off. The a/c system adds heat to the engine cooling system and turning the a/c off can help remove this heat. • you can also turn the temperature control to maximum he...

  • Page 438

    Warning! (continued) • the jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack location the scissor-type jack and tire changin...

  • Page 439

    Spare tire removal fit the jack handle extension over the drive nut located in the rear cargo area inside the vehicle. Use the lug wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle. Cauti...

  • Page 440

    Preparations for jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid being hit when operati...

  • Page 441

    Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the ...

  • Page 442

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove spare tire. 2. Remove jack and tools from mounting bracket. As- semble the tools by connecting the driver to the exten- sion, and then to the lug wr...

  • Page 443

    Position the jack handle on the jack. Do not raise the vehicle until you are sure the jack is fully engaged. 5. Raise the vehicle by turning the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum ...

  • Page 444

    Caution! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. 8. Lower the veh...

  • Page 445

    Warning! A loose tire or jack, thrown forward in a collision or hard stop, could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. 12. Remove blocks from wheels. Road tire installation 1. Mount the road tire on the axle. 2. Install the rem...

  • Page 446

    Jump-starting procedures if your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section caref...

  • Page 447

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 448

    3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is off. Warning! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-start...

  • Page 449

    Warning! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then st...

  • Page 450

    Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between drive and reverse. Using minimal accelerator pedal pressure to m...

  • Page 451

    Warning! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously w...

  • Page 452

    4. Press and maintain firm pressure on the brake pedal. 5. Using a screwdriver, reach into the opening and press and hold the shift override lever down. 6. Move the shift lever to the neutral position. 7. The vehicle may then be started in neutral. 8. Reinstall the shift lever override access cover....

  • Page 453

    Towing condition wheels off the ground 2wd models 4wd models flat tow none if transmission is operable: • transmission in neutral • 30 mph max speed(48 km/h) • 15 miles (24 km) max distance see instructions in “recreational tow- ing” under “starting and operating” • transmission in park • transfer c...

  • Page 454

    If the vehicle’s battery is discharged, refer to “shift lever override” in “what to do in emergencies” for instruc- tions on shifting the automatic transmission out of the park position for towing. Caution! • do not attempt to use sling type equipment when towing. When securing the vehicle to a flat...

  • Page 455

    Caution! Towing faster than 30 mph (48 km/h) or farther than 15 miles (24 km) with rear wheels on the ground can cause severe damage to the transmission. Such dam- age is not covered by the new vehicle limited warranty. If the transmission is not operable, or the vehicle must be towed faster than 30...

  • Page 456

    Four-wheel drive models the manufacturer recommends towing with all wheels off the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of vehicle raised and the opposite end on a towing dolly. If flatbed equipment is not available, and the transfer case is operable, the ve...

  • Page 457: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 3.7l . . . . . . . . . . . . . 457 䡵 onboard diagnostic system — obd ii . . . . . . 458 ▫ loose fuel filler cap message . . . . . . . . . . . 458 䡵 emissions inspection and maintenance programs . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 458

    ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 473 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 478 ▫ automatic transmission . . . . . . . . . . . . . . . 480 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . 482 ▫ front/rear axle fluid . . . . . . . . . . . ....

  • Page 459

    Engine compartment — 3.7l 1 — air cleaner filter 6 — washer fluid reservoir 2 — engine oil dipstick 7 — engine coolant reservoir 3 — brake fluid reservoir 8 — engine oil fill 4 — integrated power module (fuses) 9 — coolant pressure cap 5 — battery 7 maintaining your vehicle 457.

  • Page 460

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 461

    “electronic vehicle information center (evic)” in “un- derstanding your instrument panel” for further informa- tion. Tighten the gas cap until a ⬙clicking⬙ sound is heard. This is an indication that the gas cap is properly tight- ened. Press the odometer reset button to turn the message off. If the ...

  • Page 462

    2. If you crank or start the engine, you will have to start this test over. 3. As soon as you turn the ignition switch to the on position, you will see the mil symbol come on as part of a normal bulb check. 4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for a...

  • Page 463

    Replacement parts use of genuine mopar 威 parts for normal/scheduled maintenance and repairs is highly recommended to en- sure the designed performance. Damage or failures caused by the use of non-mopar 威 parts for maintenance and repairs will not be covered by the manufacturer’s warranty. Dealer ser...

  • Page 464

    Caution! • failure to properly maintain your vehicle or per- form repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle perfor- mance. Immediately have potential malfunctions examined by an authorized chrysler group llc dealer...

  • Page 465

    Caution! Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage your engine. Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “maintenance schedule” for ...

  • Page 466

    Caution! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the new vehicle limited warranty. Engine oil viscosity sae 5w-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting ...

  • Page 467

    Engine oil filter the engine oil filter should be replaced with a new filter at every engine oil change. Note: for best access to the oil filter, a drive on hoist should be used instead of a chassis hoist (3.7l only). Engine oil filter selection all of this manufacturer’s engines have a full-flow ty...

  • Page 468

    Maintenance-free battery your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- tenance required. Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or...

  • Page 469

    Caution! • it is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case. Cable clamps should b...

  • Page 470

    Warning! • use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Re...

  • Page 471

    Tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease, such as mopar 威 spray white lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wip...

  • Page 472

    Adding washer fluid the windshield and rear window washers share the same fluid reservoir. The fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator an...

  • Page 473

    Into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubri- cation or oil change. Replace as required. Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unc...

  • Page 474

    Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...

  • Page 475

    Cooling system warning! • you or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Engine ...

  • Page 476

    Cooling system – drain, flush, and refill if the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant...

  • Page 477

    Caution! (continued) • this vehicle has not been designed for use with propylene glycol based engine coolant (anti- freeze). Use of propylene glycol based engine coolant (antifreeze) is not recommended. Adding engine coolant your vehicle has been built with an improved engine coolant (antifreeze) th...

  • Page 478

    Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where the vehicle is operated. Note: mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze...

  • Page 479

    Disposal of used engine coolant used ethylene glycol based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals or children, do not store ethylene glycol...

  • Page 480

    If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • do not overfill the coolant bottle. • check coolant freeze point in the radiator and in the coolant recovery bottle. If engine coolant (antifre...

  • Page 481

    Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 482

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 483

    Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturer’s recommended fluid will require more frequent fluid and filter changes....

  • Page 484

    Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter changes....

  • Page 485

    Adding fluid fluid should be added only to fill hole until fluid begins to run out of the hole. Draining fluid first remove the fill plug (1), then the drain plug (2). Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 n·m). Caution! Do not over-tighten the plugs. You ...

  • Page 486

    • rear axle lubricant should be 0.5 in (11 mm) below the bottom edge of the oil fill hole when the vehicle is in a level position. Adding fluid add lubricant only at the fill hole and only to the level specified above. Lubricant selection use only manufacturer’s recommended lubricant. Refer to “flui...

  • Page 487

    General cleaning careful vacuuming of the top before washing is helpful in removing dust and other foreign particles. If hand washing: • wash in partial shade instead of direct sun. • wet the entire vehicle before washing the top. • wash the top with a soft, natural bristle scrub brush, and a mild s...

  • Page 488

    Equivalent to the complete stain, extending 2 in (50 mm) beyond the stain. With a soft bristle brush, scrub in all directions over the stain. Avoid heavy scrubbing. Rinse the area with warm water. If the stain is still apparent, repeat the cleaning procedure. When the stain is no longer showing, rin...

  • Page 489

    The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What causes corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • road...

  • Page 490

    Caution! • do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • use of power washers exceeding 1,200 psi (8 274 kpa) can result in damage or removal of paint and decals. Special care • if you drive on salted or dusty...

  • Page 491

    Wheel and wheel trim care • all wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • to remove heavy soil and/or excessive brake dust, use mopar 威 wheel cleaner or equivalent or select a non-abrasive, non-...

  • Page 492

    Interior care instrument panel cover the instrument panel cover has a low glare surface, which minimizes reflections in the windshield. Do not use protectants or other products, which may cause undesirable reflections. Use soap and warm water to restore the low glare surface. Cleaning interior trim ...

  • Page 493

    Cleaning headlights your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. To minimize the possibility of scratching the lenses ...

  • Page 494

    Seat belt maintenance do not bleach, dye, or clean the seat belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water. Dry with a soft cloth. Do not remove the sea...

  • Page 495

    Cavity cartridge fuse mini- fuse description j4 25 amp natural — driver door node j5 25 amp natural — passenger door node j6 40 amp green — antilock brakes pump/stability control system – if equipped j7 30 amp pink — antilock brakes valve/stability control system – if equipped j8 40 amp green — powe...

  • Page 496

    Cavity cartridge fuse mini- fuse description j20 30 amp pink — front wiper j21 20 amp blue — front washer/rear washer – if equipped j22 25 amp natural — sunroof module – if equipped m1 — 15 amp blue stop light switch feed — rear center brake lamp m2 — 20 amp yellow trailer lighting – if equipped m3 ...

  • Page 497

    Cavity cartridge fuse mini- fuse description m11 — 10 amp red climate control sys- tem – if equipped m12 — 30 amp green radio/amplifier – if equipped m13 — 20 amp yellow instrument cluster/ wireless control module/ multifunction control switch, siren – if equipped m14 — 20 amp yellow trailer tow (ex...

  • Page 498

    Cavity cartridge fuse mini- fuse description m18 — 15 amp blue exterior lighting – right front park and side marker, right tail and running lights m19 — 25 amp natural automatic shutdown #1 and #2 m20 — 15 amp blue interior lighting/ steering wheel switches – if equipped/switch bank/steering col- um...

  • Page 499

    Cavity cartridge fuse mini- fuse description m28 — 10 amp red powertrain control module m29 — 10 amp red occupant classifica- tion module m30 — 15 amp blue rear wiper module – if equipped/power folding mirror – if equipped/diagnostic link m31 — 20 amp yellow back-up lights m32 — 10 amp red airbag mo...

  • Page 500

    Cavity cartridge fuse mini- fuse description m37 — 10 amp red antilock brakes/ stability control sys- tem module/stop light switch/fuel pump relay m38 — 25 amp natural door and liftgate lock/unlock motors caution! • when installing the integrated power module cover, it is important to ensure the cov...

  • Page 501

    Light bulbs – exterior bulb no. Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 9008 h13 front park/turn signal lamp. . . . . . . . . . . . . 3757ak front side marker lamp . . . . . . . . . . . . . . . . . . . 168 back-up lamp . . . . . . . . . . . . . . . . . . . . . . . . 3157k center h...

  • Page 502

    Front turn signal and front side marker lamp 1. Turn the steering wheel all the way to the right to access the left front turn signal or side marker. Turn the steering wheel all the way to the left to access the right front turn signal or side marker. 2. Remove three push-pins from the wheel-well li...

  • Page 503

    5. Install the bulb and socket assembly into the into the fog lamp housing, and rotate the connector clockwise to lock it in place. 6. Close the hood. Rear tail/stop, turn signal, and back-up lamp 1. Open the liftgate. 2. Remove the screws that fasten the taillamp housing to the vehicle. 3. Pull the...

  • Page 504

    7. Pull the appropriate bulb(s) out of the back plate and insert the replacement bulb(s). 8. Install the back plate and screws into the taillamp housing. 9. Connect the electrical connector. 10. Install the taillamp housing and screws. 11. Close the liftgate. Fluid capacities u.S. Metric fuel (appro...

  • Page 505

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hy- brid organic additive technology) or equivalent. Engine oil use api certified sae 5w-20 engine oil, meeting the requirements of chr...

  • Page 506

    Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Front axle sae 80w-90 multi-purpose type, g...

  • Page 507: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 506 ▫ required maintenance intervals . . . . . . . . . . 508 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 508

    Maintenance schedule the scheduled maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent main- tenance may be needed for vehicles in severe operating condition...

  • Page 509

    Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is not illuminated. • change your engine oil more often if you drive your vehicle off...

  • Page 510

    Once a month • check tire pressure and look for unusual wear or damage. • inspect the battery and clean and tighten the terminals as required. • check the fluid levels of the coolant reservoir and the brake master cylinder, add as needed. • check all lights and other electrical items for correct ope...

  • Page 511

    8,000 miles (13,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer reading date repair order # dealer code signature, authorized ser...

  • Page 512

    24,000 miles (39,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the front ...

  • Page 513

    40,000 miles (65,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 514

    56,000 miles (91,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 515

    64,000 miles (104,000 km) or 48 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏ replace the air conditioning filter. ❏ replace the engine air clean...

  • Page 516

    72,000 miles (117,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fron...

  • Page 517

    88,000 miles (143,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer reading date repair order # dealer code signature, authorize...

  • Page 518

    96,000 miles (156,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏ replace the air conditioning filter. ❏ replace the engine air clean...

  • Page 519

    104,000 miles (169,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ flush and replace the engine coolant at 104,000 miles (169 000 km...

  • Page 520

    120,000 miles (195,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fr...

  • Page 521

    128,000 miles (208,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ replace the air conditioning filter. ❏ replace the engine air cle...

  • Page 522

    144,000 miles (234,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). ❏ replace the air conditioning filter. ❏ if using your vehicle for...

  • Page 523

    Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • failure to properly inspect and mai...

  • Page 525: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525 ▫ prepare for the appointment . . . . . . . . . . . 525 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 525 ▫ be reasonable with r...

  • Page 526

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 531 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 531 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 531 ▫ temperature grades . . . . . . . . . . . . . . . . . . 53...

  • Page 527

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...

  • Page 528

    This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...

  • Page 529

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 530

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...

  • Page 531

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 532

    • service manuals these comprehensive service manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing chrysler group llc vehicles. A complete working knowledge of the vehicle, system, and/or...

  • Page 533

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 534

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 535: Index

    Index 10

  • Page 536

    About your brakes . . . . . . . . . . . . . . . . . . . . . . . 351 abs (anti-lock brake system) . . . . . . . . . . . . 353,356 adding engine coolant (antifreeze) . . . . . . . . . . 475 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 additives, fuel . . . . . . . . . . . . . ...

  • Page 537

    Automatic door locks . . . . . . . . . . . . . . . . . . . . . 32 automatic headlights . . . . . . . . . . . . . . . . . . . . 159 automatic oil change indicator . . . . . . . . . . 236,243 automatic temperature control (atc) . . . . . . . . . 305 automatic transaxle . . . . . . . . . . . . . . . . ...

  • Page 538

    Bulbs, light . . . . . . . . . . . . . . . . . . . . . . . . . . 92,498 calibration, compass . . . . . . . . . . . . . . . . . . . . . 246 capacities, fluid . . . . . . . . . . . . . . . . . . . . . . . . 502 caps, filler fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 oil (engi...

  • Page 539

    Command-trac operation . . . . . . . . . . . . . . . . . . 333 compact disc (cd) maintenance . . . . . . . . . . . . . 300 compact spare tire . . . . . . . . . . . . . . . . . . . . . . 381 compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 compass calibration . . . . . . . . . ...

  • Page 540

    Disposal antifreeze (engine coolant) . . . . . . . . . . . . . 477 engine oil . . . . . . . . . . . . . . . . . . . . . . . . . 464 door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 door locks, automatic . . . . . . . . . . . . . . . . . . . . 32 door opener, garage . . . . . ....

  • Page 541

    Coolant (antifreeze) . . . . . . . . . . . . . . . . 473,503 cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 473 exhaust gas caution . . . . . . . . . . . . . . . . 89,403 fails to start . . . . . . . . . . . . . . . . . . . . . . . . 320 flooded, starting . . . . . . . . . . . . . . ....

  • Page 542

    Flashers hazard warning . . . . . . . . . . . . . . . . . . . . . 434 turn signal . . . . . . . . . . . . . . 92,162,227,500,501 flipper glass, liftgate . . . . . . . . . . . . . . . . . . . . . 40 flooded engine starting . . . . . . . . . . . . . . . . . . . 320 floor console . . . . . . . . . . . ...

  • Page 543

    Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492 garage door opener (homelink®) . . . . . . . . . . . 184 gas cap (fuel filler cap) . . . . . . . . . . . . 404,406,458 gas gauge (fuel gauge) . . . . . . . . . . . . . . . . . . . 224 gasoline (fuel) . . . . . . . . . . . . . ...

  • Page 544

    Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 replacing . . . . . . . . . . . . . . . . . . . . . . . . . . 499 switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 time delay . . . . . . . . . . . . . . . . . . . . . . . . . 160 heated mirrors . . . . . . . . . ....

  • Page 545

    Jack location . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 jack operation . . . . . . . . . . . . . . . . . . . . . . . 435,439 jacking instructions . . . . . . . . . . . . . . . . . . . . . . 439 jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . 444 key-in reminder . . ...

  • Page 546

    Electronic stability program (esp) indicator . . 366 engine temperature warning . . . . . . . . . . . . 231 exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 fog . . . . . . . . . . . . . . . . . . . . . . . . . 161,227,500 four-wheel drive indicator . . 230,231,233,336,342 hazard ...

  • Page 547

    Loading vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 406 tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373 locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 auto unlock . . . . . . . . . . . . . . . . . . . . . . . . . 32 automatic door . . ....

  • Page 548

    Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 modifications/alterations, vehicle . . . . . . . . . . . . . 8 monitor, tire pressure system . . . . . . . . . . . . . . . 389 mopar parts . . . . . . . . . . . . . . . . . . . . . . . . . 461,528 mtbe/etbe . . . . . . . . . . . . . ...

  • Page 549

    Overdrive off switch . . . . . . . . . . . . . . . . . . . . 331 overheating, engine . . . . . . . . . . . . . . . . . . . 232,434 owner’s manual (operator manual) . . . . . . . . . 5,529 paint care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486 paint damage . . . . . . . . . . . . . ...

  • Page 550

    Radio operation . . . . . . . . . . . . . . . . . . . . . . . . 301 rain sensitive wiper system . . . . . . . . . . . . . . . . 168 rear axle (differential) . . . . . . . . . . . . . . . . . . . . 483 rear park sense system . . . . . . . . . . . . . . . . . . . 176 rear seat, folding . . . . . . . ....

  • Page 551

    Rotation, tires . . . . . . . . . . . . . . . . . . . . . . . . . . 388 safety checks inside vehicle . . . . . . . . . . . . . . . . . 90 safety checks outside vehicle . . . . . . . . . . . . . . . 92 safety defects, reporting . . . . . . . . . . . . . . . . . . 528 safety information, tire . . . . ...

  • Page 552

    Selection of coolant (antifreeze) . . . . . . . . . . 474,503 selection of oil . . . . . . . . . . . . . . . . . . . . . . . . . 463 sentry key (immobilizer) . . . . . . . . . . . . . . . . . . . 14 sentry key programming . . . . . . . . . . . . . . . . . . . 16 sentry key replacement . . . . . . . ...

  • Page 553

    Steering power . . . . . . . . . . . . . . . . . . . . . . . . . . 349,350 tilt column . . . . . . . . . . . . . . . . . . . . . . 171,172 wheel, tilt . . . . . . . . . . . . . . . . . . . . . . 171,172 steering wheel audio controls . . . . . . . . . . . . . . 298 steering wheel mounted sound system...

  • Page 554

    Compact spare . . . . . . . . . . . . . . . . . . . . . . 381 general information . . . . . . . . . . . . . . . . . . 377 high speed . . . . . . . . . . . . . . . . . . . . . . . . . 380 inflation pressures . . . . . . . . . . . . . . . . . . . . 378 jacking . . . . . . . . . . . . . . . . . . . . ....

  • Page 555

    Transaxle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 automatic . . . . . . . . . . . . . . . . . . . . . . . . . 322 operation . . . . . . . . . . . . . . . . . . . . . . . . . . 322 transfer case . . . . . . . . . . . . . . . . . . . . . . . . . . . 482 fluid . . . . . . . . . . ...

  • Page 556

    Voice recognition system (vr) . . . . . . . . . . . . . . 133 warning flasher, hazard . . . . . . . . . . . . . . . . . . 434 warning lights (instrument cluster description) . . . 224 warning, roll over . . . . . . . . . . . . . . . . . . . . . . . . 4 warnings and cautions . . . . . . . . . . . . ....

  • Page 557

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be obser...

  • Page 558

    Chrysler group llc 12k k74-126-ae 5th edition printed in u.S.A..