1. DL manuals
  2. Jeep
  3. Automobile
  4. 2014 Patriot
  5. Owner's Manual

Jeep 2014 Patriot Owner's Manual

Other manuals for 2014 Patriot: Owner's Manual, User Manual, Owner's Manual

Summary of 2014 Patriot

  • Page 1

    Patriot chrysler group llc o w n e r ’ s m a n u a l 20 14 p a triot 14mk74-126-ac third edition printed in u.S.A. 2 0 1 4.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 understanding the feat...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 rollover warning . . . . . . . . . . . . . . . . . . .4 䡵 how to use this manual . . . . . . . . . . . . . .5 䡵 warnings and cautions . . . . . . . . . . . . . .7 䡵 vehicle identification number . . . . . . . .7 ...

  • Page 6

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and ...

  • Page 7

    Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million a...

  • Page 8

    6 introduction.

  • Page 9

    Warnings and cautions this owners manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire owners manual, you may miss importan...

  • Page 10

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right front body vin location 8 introduct...

  • Page 11: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . .12 ▫ ignition key removal . . . . . . . . . . . . . . . . . . .12 ▫ locking doors with a key. . . . . . . . . . . . . . . .14 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . .14 䡵 sentry k...

  • Page 12

    ▫ to lock the doors and liftgate . . . . . . . . . . . .22 ▫ sound horn with remote key lock . . . . . . . . .22 ▫ flash lights with remote key lock/unlock . . .23 ▫ using the panic alarm . . . . . . . . . . . . . . . . . .24 ▫ programming additional transmitters. . . . . . . .25 ▫ general informati...

  • Page 13

    ▫ seat belts in passenger seating positions . . . . . .53 ▫ automatic locking retractor mode (alr) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . .54 ▫ seat belt pretensioners . . . . . . . . . . . . . . . . . .55 ▫ supplemental active head restraints (ahr) . . .55 ▫ enhanced seat b...

  • Page 14

    A word about your keys the authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition key removal 1. Place the shift lever in...

  • Page 15

    Note: if you try to remove the key before you place the shift lever in park, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, place the shift lever in park, rotate the key to the right slightly, then remove the key as described. If a malfunc- tion occurs, the...

  • Page 16

    Warning! (continued) • allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Chil- dren should be warned not to touch the parking brake, brake pedal or the shift lever. • do not leave the key fob in or near the ...

  • Page 17

    Sentry key® the sentry key® immobilizer system prevents unau- thorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses ignition keys that have an embedded el...

  • Page 18

    Caution! The sentry key® immobilizer system is not compat- ible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. All of the keys provided with your new vehicle have been programmed to the vehicle electronics....

  • Page 19

    Customer key programming if you have two valid sentry keys®, you can program new sentry keys® to the system by performing the following procedure: 1. Cut the additional sentry key® transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the igniti...

  • Page 20

    Note: if a programmed key is lost, see your authorized dealer to have all remaining keys erased from the sys- tem’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of s...

  • Page 21

    3. The vehicle security light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the vehicle security alarm is arming. During this period, if a door is opened, the ignition switch is turned to on/run, or the power door locks are unlocked in any manner, the veh...

  • Page 22

    Vehicle security alarm manual override the vehicle security alarm will not arm if you lock the doors using the manual door lock plunger. Remote keyless entry (rke) — if equipped this system allows you to lock or unlock the doors and liftgate or activate the panic alarm from distances up to approxima...

  • Page 23

    To unlock the doors and liftgate press and release the unlock button on the rke transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn...

  • Page 24

    Note: pressing the lock button on the rke transmit- ter while you are inside the vehicle will activate the vehicle security alarm. Opening a door with the vehicle security alarm activated will cause the alarm to sound. Press the unlock button to deactivate the vehicle security alarm. Illuminated app...

  • Page 25

    • for vehicles not equipped with the evic, perform the following steps: 1. Press the lock button on a programmed rke trans- mitter for at least 4 seconds, but no longer than 10 seconds. Then, press the panic button while still holding the lock button. 2. Release both buttons at the same time. 3. Tes...

  • Page 26

    • for vehicles not equipped with the evic, perform the following steps: 1. Press and hold the unlock button on a programmed rke transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the lock button while still holding the unlock button. 2. Release both buttons at th...

  • Page 27

    Note: when you turn off the panic alarm by pressing the panic button a second time, you may have to move closer to the vehicle due to the radio frequency noises of the system. Programming additional transmitters refer to sentry key® “customer key programming.” if you do not have a programmed rke tra...

  • Page 28

    1. If the rke transmitter is equipped with a screw, remove the screw. With the rke transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the rke transmitter apart. Make sure not to damage the elastomer seal during removal. 2. Remove and replace the battery. Avoid tou...

  • Page 29

    Note: • the vehicle must be equipped with an automatic transmission to be equipped with remote start. • obstructions between the vehicle and the key fob may reduce this range. How to use remote start all of the following conditions must be met before the engine will remote start: • shift lever in pa...

  • Page 30

    Remote start abort message on electronic vehicle information center (evic) — if equipped the following messages will display in the evic if the vehicle fails to remote start or exits remote start prema- turely: • remote start aborted — door ajar • remote start aborted — hood ajar • remote start abor...

  • Page 31

    • the engine can be started two consecutive times (two 15-minute cycles) with the rke transmitter. However, the ignition switch must be cycled to the on/run position before you can repeat the start sequence for a third cycle. Remote start will also cancel if any of the following occur: • the engine ...

  • Page 32

    Door locks manual door locks use the manual door lock knob to lock the doors from inside the vehicle. If the lock knob is down when the door is closed, the door will lock. Make sure the keys are not inside the vehicle before closing the door. Warning! • for personal security and safety in the event ...

  • Page 33

    Caution! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power door locks a power door lock switch is located on the driver’s and front passenger’s door panel. Press this switch to lock or unlock ...

  • Page 34

    Auto lock doors programming the automatic door locks feature can be enabled or disabled as follows: • for vehicles equipped with the electronic vehicle infor- mation center (evic), refer to “electronic vehicle infor- mation center (evic) — if equipped/personal settings (customer programmable feature...

  • Page 35

    Automatic unlock doors on exit the doors will unlock automatically if: • the automatic unlock doors on exit feature is enabled. • the transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). • the transmission is in neutral or park. • the driver’s door is opened. • the doors were n...

  • Page 36

    3. Within 30 seconds, press the power door unlock switch to unlock the doors. 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. Note: • if you do not hear the chime it means that the system did not ent...

  • Page 37

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged. Child-protection door lock location child-protection door lock function 2 things to know before starting your vehicle 35.

  • Page 38

    Note: for emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window and open the door with the outside door handle. Power windows — if equipped power window switches the window controls on the driver’s door trim panel control all the door windows. There ...

  • Page 39

    Auto-down the driver’s door window switch has an auto-down feature. Push the window switch past the first detent, release, and the window will go down automatically. To cancel the auto-down movement, operate the switch in either the up or down direction and release the switch. Window lockout switch ...

  • Page 40

    Liftgate note: the key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn to the right (manual lock models only). The liftgate can also be unlocked using the remote keyless entry (rke) transm...

  • Page 41

    • although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to release the latch in the event of an electrical system malfunction. Warning! • driving with the liftgate open can allow poisonous exhaust gases into your ve...

  • Page 42

    • knee bolsters/blockers for front seat occupants • front seat belts incorporate pretensioners that may enhance occupant protection by managing occupant energy during an impact event • all seat belt systems (except the driver’s) include automatic locking retractors (alrs), which lock the seat belt w...

  • Page 43

    Warning! • never place a rear facing infant seat in front of an air bag. A deploying passenger advanced front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rearward facing infant seat. • only use a rearward-facing child restraint in a vehicle with a...

  • Page 44

    5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the customer center. Phone numbers are provided under ⴖif you need assistanceⴖ. Warning! • relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with y...

  • Page 45

    Buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of in...

  • Page 46

    Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure everyone in your vehicle is in a seat and using a seat belt properly. • wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the larg...

  • Page 47

    3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” pulling out the latch plate inserting latch plate into buckle 2 things to know before starting your vehicle 45.

  • Page 48

    Warning! • a belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal inju- ries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you prop- erly. In a sudden stop you...

  • Page 49

    Warning! • a lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • a twisted belt may not protect you properly. In a collisi...

  • Page 50

    6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed posi- tion. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Warning! A frayed or torn belt could rip apart in a collision and leave you with no protec...

  • Page 51

    As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage, try to move it down to make sure that it is locked in position. In the rear seat, move toward the center of the seat to ...

  • Page 52

    2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in the seat. Slide the regular latch pl...

  • Page 53

    6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, pull on the lap ...

  • Page 54

    10. To disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If neces- sary, slide the latch plate down the webbing to allow the belt to retract fully....

  • Page 55

    Seat belts in passenger seating positions the seat belts in the passenger seating positions are equipped with automatic locking retractors (alr) which are used to secure a child restraint system. For additional information, refer to “installing child re- straints using the vehicle seat belt” under t...

  • Page 56

    Automatic locking retractor mode (alr) — if equipped in this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is available on all passenger-seating positions with a combination lap/shoulder belt. Use...

  • Page 57

    Energy management feature this vehicle has a safety belt system with an energy management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on collision. This safety belt system has a retractor assembly that is designed to release webbing in a co...

  • Page 58

    How the active head restraints (ahr) work the occupant restraint controller (orc) determines whether the severity, or type of rear impact will require the active head restraints (ahr) to deploy. If a rear impact requires deployment, both the driver and front passenger seat ahrs will be deployed. Whe...

  • Page 59

    Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. Note: for more information on properly adjusting and positi...

  • Page 60

    3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The ahr front soft foam and trim half should lock into the back decorative plastic half. 1 — downward movement 2 — rearward movement 3 — final downward movement to engage locking mechanism 58 thi...

  • Page 61

    Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an authorized dealer. Enhanced seat belt use reminder system (beltalert®) beltalert® is a feature in...

  • Page 62

    The front passenger seat beltalert® is not active when the front passenger seat is unoccupied. Beltalert® may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat (if equip...

  • Page 63

    Seat belts and pregnant women we recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible. Keep the belt lo...

  • Page 64

    The advanced front air bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on the severity and type of collision. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the driver ...

  • Page 65

    • passenger advanced front air bag • supplemental seat-mounted side air bags (sab) • supplemental side air bag inflatable curtains (sabic) • front and side impact sensors • front seat belt pretensioners, seat belt buckle switch, and seat track position sensors advanced front air bag features the adv...

  • Page 66

    Supplemental seat-mounted side air bags (sab) — if equipped supplemental seat-mounted side air bags (sab) may provide enhanced protection to help protect an occupant during a side impact. The sab is marked with an air bag label sewn into the outboard side of the front seats. When the air bag deploys...

  • Page 67

    Note: • should a vehicle rollover occur, the pretensioners and/or sab and sabic curtains on both sides of the vehicle may deploy. • air bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • being too close to the supplemental side air bag inflatable curt...

  • Page 68

    Warning! (continued) • do not use accessory seat covers or place objects between you and the sab; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. • your vehicle is equipped with sabic air bags, do not have any accessory items installed whi...

  • Page 69

    Air bag deployment sensors and controls occupant restraint controller (orc) the orc is part of a federally regulated safety system required for this vehicle. The orc determines if deployment of the front and/or side air bags in a frontal or side collision is required. Based on the impact sensor’s si...

  • Page 70

    The orc monitors the readiness of the electronic parts of the air bag system whenever the ignition switch is in the start or on/run position. If the key is in the off position, in the acc position, or not in the ignition, the air bag system is not on and the air bags will not inflate. The orc contai...

  • Page 71

    Driver and passenger advanced front air bag inflator units the driver and passenger advanced front air bag inflator units are located in the center of the steering wheel and on the right side of the instrument panel. When the orc detects a collision requiring the ad- vanced front air bags, it signal...

  • Page 72

    Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating sab exits through the seat seam into the space between the occupant and the door. The sab fully inflate in about 10 milliseco...

  • Page 73

    Front and side impact sensors in front and side impacts, impact sensors can aid the orc in determining appropriate response to impact events. Enhanced accident response system in the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains int...

  • Page 74

    If you do have a collision, which deploys the air bags, any or all of the following may occur: • the nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the air bags deploy and unfold. The abrasions are similar to friction rope burns or tho...

  • Page 75

    Maintaining your air bag system warning! • modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the s...

  • Page 76

    Air bag warning light you will want to have the air bags ready to inflate for your protection in a collision. The air bag warning light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenan...

  • Page 77

    Vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The edr in this vehicle is designed to record such data as: • how various systems in your vehicle were operating; • whether or not the driver and passenger safety belts were buckled/fastened; • how far (if ...

  • Page 78

    Children 12 years or younger should ride properly buckled up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear seats rather than in the front. There are different sizes and types of restraints for children from newborn size to the ch...

  • Page 79

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight limits of their child restraint either an infant carrier ...

  • Page 80

    Infants and child restraints safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carrie...

  • Page 81

    Older children and child restraints children who are two years old or who have outgrown their rear-facing convertible child seat can ride forward- facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direc- tion are for children who are over two ye...

  • Page 82

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether ...

  • Page 83

    Recommendations for attaching child restraints restraint type combined weight of the child + child restraint use any attachment method shown with an “x” below latch – lower anchors only seat belt only latch – lower anchors + top tether anchor seat belt + top tether anchor rear-facing child restraint...

  • Page 84

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint anchor- age system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 85

    Latch-equipped child seats without using the vehicle’s seat belts. Some seating positions may have a top tether anchorage but no lower anchorages. In these seating positions, the seat belt must be used with the top tether anchorage to install the child restraint. Please see the following table for m...

  • Page 86

    What is the weight limit (child’s weight + weight of the child restraint) for using the latch anchorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and teth...

  • Page 87

    Can two child restraints be attached using a common lower latch anchorage? No never “share” a latch anchorage with two or more child restraints. If the center position does not have dedicated latch lower anchorages, use the seat belt to install a child seat in the center position next to a child sea...

  • Page 88

    Locating the latch anchorages the lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between ...

  • Page 89

    Center seat latch do not install child restraints with rigid lower attach- ments in the center seating position. Only install this type of child restraint in the outboard seating positions. Child restraints with flexible, webbing mounted lower attach- ments can be installed in any rear seating posit...

  • Page 90

    3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recline the seat and / or raise the head restraint to get a better fit. If the rear seat can be moved forward and rearward in the vehicle, you may wish to move it to its rear-mo...

  • Page 91

    How to stow an unused alr seatbelt when using the latch attaching system to install a child restraint, stow all alr seat belts that are not being used by other occupants or being used to secure child restraints. An unused belt could injure a child if they play with it and accidentally lock the seatb...

  • Page 92

    Installing child restraints using the vehicle seat belt the seat belts in the passenger seating positions are equipped with either a switchable automatic locking re- tractor (alr) or a cinching latch plate or both. Both types of seat belts are designed to keep the lap portion of the seat belt tight ...

  • Page 93

    What is the weight limit (child’s weight + weight of the child restraint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tether anchor when using the seat belt to install a forward facing child restraint, ...

  • Page 94

    Installing a child restraint with a switchable automatic locking retractor (alr) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forward and r...

  • Page 95

    8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. See the section “installing child restraints using the top tether anchorage” for directions to attach a tether anchor. 9. Test...

  • Page 96

    4. Finally, pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearward and downward into the vehicle seat. 5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether str...

  • Page 97

    Installing child restraints using the top tether anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for t...

  • Page 98

    Warning! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly be- hind the child seat to secure a child restraint top tether strap. If your vehicle is equipped with a split rear seat, make sure the tether ...

  • Page 99

    Caution! Never use non-detergent oil or straight mineral oil in the engine or damage may result. Note: a new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of diff...

  • Page 100

    Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (co), follow these safety tips: • do not run the engine in a closed garage or in confined...

  • Page 101

    Safety checks you should make inside the vehicle seat belts inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat b...

  • Page 102

    Warning! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • always make sure that floor mats are properly attached to the floor mat fasteners. • never place or install floor mats or other floor coverings in the vehicle that cannot b...

  • Page 103

    Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Ch...

  • Page 105: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 ▫ inside day/night mirror . . . . . . . . . . . . . . . .108 ▫ automatic dimming mirror — if equipped . . .109 ▫ outside mirror — driver side . . . . . . . . . . . .110 ▫ outside ...

  • Page 106

    ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . . .146 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . . .150 䡵 seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 ▫ power seats — if equipped . . . . . . . . . . . . . .151 ▫ heated seats — if equipped . . . ....

  • Page 107

    ▫ instrument panel dimming. . . . . . . . . . . . . . .169 ▫ map/reading lights . . . . . . . . . . . . . . . . . . .170 䡵 windshield wipers and washers . . . . .171 ▫ windshield wiper operation . . . . . . . . . . . . .172 ▫ intermittent wiper system. . . . . . . . . . . . . . .173 ▫ windshield was...

  • Page 108

    䡵 power sunroof — if equipped . . . . . . . .188 ▫ opening sunroof — express . . . . . . . . . . . . . .189 ▫ opening sunroof — manual mode . . . . . . . . .189 ▫ closing sunroof — express. . . . . . . . . . . . . . .190 ▫ closing sunroof — manual mode . . . . . . . . . .190 ▫ pinch protect feature ...

  • Page 109

    䡵 rear window features . . . . . . . . . . . . . .206 ▫ rear window wiper/washer . . . . . . . . . . . . .206 ▫ rear window defroster . . . . . . . . . . . . . . . . .207 䡵 roof luggage rack — if equipped . . . .208 3 understanding the features of your vehicle 107.

  • Page 110

    Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicl...

  • Page 111

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activa...

  • Page 112

    Outside mirror — driver side adjust the flat outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your head close to the door glass. Outside mirror — passenger side adjust the convex outside mirror so you can just see the side of your vehi...

  • Page 113

    To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror. Heated mirro...

  • Page 114

    Vanity mirrors — if equipped to use the vanity mirror, rotate the sun visor down and swing the mirror cover upward. Sun visor sliding feature the sun visors may be extended out to provide more coverage of the side glass. Uconnect® phone — if equipped uconnect® phone is a voice-activated, hands-free,...

  • Page 115

    For uconnect® customer support: • u.S. Residents - visit www.Uconnectphone.Com or call 1–877–855–8400. • canadian residents - visit www.Uconnectphone.Com or call, 1-800-465–2001 (english) or 1-800-387-9983 (french). Uconnect® phone allows you to transfer calls between the system and your mobile phon...

  • Page 116

    Uconnect® phone button the radio or steering wheel controls (if equipped) will contain the two control buttons (uconnect® phone button and voice com- mand button) that will enable you to access the system. When you press the button you will hear the word uconnect® followed by a beep. The beep is you...

  • Page 117

    Operation voice commands can be used to operate the uconnect® phone and to navigate through the uconnect® phone menu structure. Voice commands are required after most uconnect® phone prompts. You will be prompted for a specific command and then guided through the available options. • prior to giving...

  • Page 118

    Help command if you need assistance at any prompt, or if you want to know your options at any prompt, say “help” following the beep. The uconnect® phone will play some of the options at any prompt if you ask for help. To activate the uconnect® phone, simply press the button and follow the audible pr...

  • Page 119

    • for identification purposes, you will be prompted to give the uconnect® phone a name for your mobile phone. Each mobile phone that is paired should be given a unique phone name. • you will then be asked to give your mobile phone a priority level between one and seven, with one being the highest pr...

  • Page 120

    • the system will prompt you to say the name of the person you want to call. • after the “ready” prompt and the following beep, say the name of the person you want to call. For example, you can say “john doe,” where john doe is a previ- ously stored name entry in the uconnect® phonebook or downloade...

  • Page 121

    The uconnect® phone will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. In addition, if equipped and supported by your phone, uconnect® pho...

  • Page 122

    • this downloaded phonebook cannot be edited or deleted on the uconnect® phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to uconnect® phone on the next phone connection. Edit uconnect® phonebook entries note: editing phonebook entries is recommended whe...

  • Page 123

    Delete uconnect® phonebook entry note: editing phonebook entries is recommended when the vehicle is not in motion. • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook delete.” • after you enter the phonebook delete menu, you will then be asked for the name ...

  • Page 124

    • after confirmation, the phonebook entries will be deleted. • note that only the phonebook in the current language is deleted. • automatic downloaded phonebook entries cannot be deleted or edited. List all names in the uconnect® phonebook • press the button to begin. • after the “ready” prompt and ...

  • Page 125

    Answer or reject an incoming call — no call currently in progress when you receive a call on your mobile phone, the uconnect® phone will interrupt the vehicle audio sys- tem, if on, and will ask if you would like to answer the call. Press the button to accept the call. To reject the call, press and ...

  • Page 126

    Place/retrieve a call from hold to put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the but- ton until you hear a single beep. Toggling between calls if two calls are in progress (one active a...

  • Page 127

    Redial • press the button to begin. • after the “ready” prompt and the following beep, say “redial.” • the uconnect® phone will call the last number that was dialed from your mobile phone. Note: this may not be the last number dialed from the uconnect® phone. Call continuation call continuation is t...

  • Page 128

    Uconnect® phone features language selection to change the language that the uconnect® phone is using: • press the button to begin. • after the “ready” prompt and the following beep, say the name of the language you wish to switch to english, espanol, or francais. • continue to follow the system prom...

  • Page 129

    Note: • the emergency number dialed is based on the country where the vehicle is purchased (911 for the u.S. And canada and 060 for mexico). The number dialed may not be applicable with the available mobile service and area. • if supported, this number may be programmable on some systems. To do this...

  • Page 130

    Note: you should program the desired towing assis- tance phone number using the voice command system. To do this, press the button and say “setup,” followed by “towing assistance.” when prompted say 1-800-528- 2069 for the u.S., say 1-800-363-4869 for canada, say 55-14- 3454 for mexico city and 1-80...

  • Page 131

    Saying a number, or sequence of numbers, followed by “send,” is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager. You can also send stored uconnect® phonebook entries as tones for fast and easy access to voice mail and pager...

  • Page 132

    Turning confirmation prompts on/off turning confirmation prompts off will stop the system from confirming your choices (e.G., the uconnect® phone will not repeat a phone number before you dial it). • press the button to begin. • after the “ready” prompt and the following beep, say one of the followi...

  • Page 133

    Mute/un-mute (mute on/off) when you mute the uconnect® phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the uconnect® phone: • press the button. • following the beep, say “mute.” in order to un-mute...

  • Page 134

    List paired mobile phone names • press the button to begin. • after the “ready” prompt and the following beep, say “setup phone pairing.” • when prompted, say “list phones.” • the uconnect® phone will play the phone names of all paired mobile phones in order from the highest to the lowest priority. ...

  • Page 135

    Things you should know about your uconnect® phone uconnect® phone tutorial to hear a brief tutorial of the system features, press the button and say “uconnect® tutorial.” voice training for users experiencing difficulty with the system recogniz- ing their voice commands or numbers, the uconnect® pho...

  • Page 136

    Voice command • for best performance, adjust the rearview mirror to provide at least ½ in (1 cm) gap between the overhead console (if equipped) and the mirror. • always wait for the beep before speaking. • speak normally without pausing, just as you would speak to a person sitting a few feet/meters ...

  • Page 137

    • even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • in a convertible vehicle, system performance may be compromised with the convertible top down. Far end audio performance • audio quality is maximized under...

  • Page 138

    Read messages: if you receive a new text message while your phone is connected to uconnect® phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • press the button. • after the “ready” prompt and the following beep, say “sms read” o...

  • Page 139

    List of preset messages: 1. Yes 2. No 3. Where are you? 4. I need more direction. 5. L o l 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 11. See you in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18....

  • Page 140

    Turn voice text reply incoming announcement on/off turning the voice text reply incoming announcement off will stop the system from announcing the new incoming messages. • press the button. • after the “ready” prompt and the following beep, say “setup, incoming message announcement”, you will then b...

  • Page 141

    3 understanding the features of your vehicle 139.

  • Page 142

    140 understanding the features of your vehicle.

  • Page 143

    3 understanding the features of your vehicle 141.

  • Page 144

    Voice commands primary alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location voice commands primary alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais 142 understanding ...

  • Page 145

    Voice commands primary alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book voice commands primary alternate (s) previous record again redial return to main menu return or main menu select phone select...

  • Page 146

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 147

    Warning! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your at- tention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. When y...

  • Page 148

    To hear the first available menu, press the voice com- mand button and say “help” or “main menu.” commands the voice command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the volum...

  • Page 149

    Radio am to switch to the am band, say “am” or “radio am.” in this mode, you may say the following commands: • “frequency #” (to change the frequency) • “next station” (to select the next station) • “previous station” (to select the previous station) • “radio menu” (to switch to the radio menu) • “m...

  • Page 150

    Disc mode to switch to the disc mode, say “disc.” in this mode, you may say the following commands: • “track” (#) (to change the track) • “next track” (to play the next track) • “previous track” (to play the previous track) • “main menu” (to switch to the main menu) usb mode to switch to usb mode, s...

  • Page 151

    – “delete” (to delete the recording) • “play memos” (to play previously recorded memos) — during the playback you may press the voice com- mand button to stop playing memos. You pro- ceed by saying one of the following commands: – “repeat” (to repeat a memo) – “next” (to play the next memo) – “previ...

  • Page 152

    Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect® voice “voice training” feature may be used. 1. Press the voice command button, say “system setup” and once you are in that menu then say “voice training.” this will train your...

  • Page 153

    Power seats — if equipped some models may be equipped with a power driver’s seat. The power seat switch is located on the outboard side of the seat near the floor. Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. Warning! • adjusting a seat while driving may be dange...

  • Page 154

    Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting the seat up or down the height of the seats...

  • Page 155

    When the high-level setting is selected, the heater will provide a boosted heat level during the initial stages of operation. Then, the heat output will drop to the normal hi-level. If the hi-level setting is selected, the system will automatically switch to low-level after approximately 30 minutes ...

  • Page 156

    Manual front seat adjustment on models equipped with manual seats, the adjusting bar is located at the front of the seats, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body...

  • Page 157

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 158

    Manual lumbar — if equipped the lumbar adjustment handle is located on the outboard side of the driver’s seatback. Rotate the lever downward to increase the lumbar support or rotate the lever upward to decrease the lumbar support. Driver’s seatback recline to adjust the seatback, lift the lever loca...

  • Page 159

    Warning! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Fold-flat front passenger seat to fold the front passenger seat, lift the recliner han...

  • Page 160

    Head restraints head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. Warning! The head restraints for all occupants must be ...

  • Page 161

    When ahrs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the ahr. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear imp...

  • Page 162

    For comfort the active head restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Note: • the head ...

  • Page 163

    • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head restraints (ahr)” in “things to know before starting your vehicle” for further information. Warning! • do not place items over the top of the active head restraint, such as coats, seat cov...

  • Page 164

    Folding rear seat to provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to fold the rear seatback flat. To raise the seatback, pull the strap forward and lift the seatback into its upright position. Rear seat release strap folded rear seat 162 understan...

  • Page 165

    Warning! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. Reclining rear seat — if equipped for ...

  • Page 166

    To open and close the hood to open the hood, two latches must be released. 1. Pull the hood release lever located on the left kick panel. 2. Move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop rod, clipped to the right side (left sid...

  • Page 167

    Caution! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open 8 in (20 cm) approximately and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. Warning! Be sure the hood is fully...

  • Page 168

    Lights multifunction lever the multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and the fog lights. The multifunction lever is located on the left side of the ste...

  • Page 169

    Headlights and parking lights turn the end of the multifunction lever to the first detent to turn on the parking lights. Turn the end of the lever to the second detent to turn on the headlights. Daytime running lights — if equipped the high beam lights will come on as daytime running lights (lower i...

  • Page 170

    Note: the fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the fog lights. Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn ...

  • Page 171

    Note: if either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. Lane change assist tap the lever up or down once, without ...

  • Page 172

    Rotate the center portion of the lever upward to the last detent to turn on the interior lighting. Map/reading lights these lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off. The ...

  • Page 173

    Note: the lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically. Windshield wipers and washers the windshield wiper/washer control lever is located on the right side of the steering colum...

  • Page 174

    Caution! • turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • in cold weather, always turn off the wiper switch and allow the wipers to return to the “park” posi- tion be...

  • Page 175

    Intermittent wiper system use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever. Rotate the end of the lever upward (clockwise) to decrease the delay time and downwar...

  • Page 176

    Mist feature push down on the control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate. Note: the mist feature does not activate the washer pump; therefore, no washer fluid wil...

  • Page 177

    Push down on the lever to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired. Push the lever up to lock the steering column firmly in place. Warning! Do not adjust the steering column while driving. Adjusting the steering column wh...

  • Page 178

    The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic ...

  • Page 179

    Warning! Leaving the electronic speed control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system off when you are not using it. To set a desired speed turn the elec...

  • Page 180

    To vary the speed setting when the electronic speed control is set, you can in- crease speed by pushing the res (+) button. If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. Pressing the res (+) but...

  • Page 181

    Warning! Electronic speed control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose control and have an accident. Do not use electronic speed control in heavy traffic or on roads that are winding, icy, snow-cov...

  • Page 182

    Homelink® buttons/sunvisor/headliner note: homelink® is disabled when the vehicle secu- rity alarm is active. Before you begin programming homelink® be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of t...

  • Page 183

    Note: • erasing all channels should only be performed when programming homelink® for the first time. Do not erase channels when programming additional buttons. • if you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the internet at www.Homelink.Com for informat...

  • Page 184

    1. Cycle the ignition to the on/run position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the homelink® button you wish to program while keeping the homelink® indicator light in view. 3. Simultaneously press and hold both the homelink® button you want to program and the hand-h...

  • Page 185

    Reprogramming a single homelink® button to reprogram a channel that has been previously trained, follow these steps: 1. Cycle the ignition to the on/run position. 2. Press and hold the desired homelink® button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. ...

  • Page 186

    5. Press and hold the programmed homelink® button and observe the indicator light. • if the indicator light stays on constantly, program- ming is complete and the garage door/device should activate when the homelink® button is pressed. • to program the remaining two homelink® buttons, repeat each st...

  • Page 187

    It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage door or gate motor. 1. Cycle the ignition to the on/run position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the homelink® button you wish to pro- gram while keepin...

  • Page 188

    Reprogramming a single homelink® button to reprogram a channel that has been previously trained, follow these steps: 1. Cycle the ignition to the on/run position. 2. Press and hold the desired homelink® button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. ...

  • Page 189

    Troubleshooting tips if you are having trouble programming homelink®, here are some of the most common solutions: • replace the battery in the original hand-held transmitter. • press the learn button on the garage door opener to complete the training for a rolling code. • did you unplug the device f...

  • Page 190

    General information this device complies with fcc rules part 15 and industry canada rss-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause...

  • Page 191

    Warning! • never leave children alone in a vehicle, or with access to an unlocked vehicle. Never leave the key fob in or near the vehicle. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in se...

  • Page 192

    Closing sunroof — express press the switch forward and release it within one-half second and the sunroof will close automatically from any position. The sunroof will close fully and stop automati- cally. This is called “express close”. During express close operation, any movement of the switch will ...

  • Page 193

    Sunshade operation the sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. Note: the sunshade cannot be closed if the sunroof is open. Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound ...

  • Page 194

    Electrical power outlets there is a standard 12 volt (13 amp) power outlet located in the integrated center stack (ics) for added conve- nience. This power outlet can power mobile phones, electronics and other low power devices. Power is available when the ignition switch is in the on or acc positio...

  • Page 195

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 196

    Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge suffi- ciently to degrade battery life and/or prevent the engine from starting. • ...

  • Page 197

    Warning! To avoid serious injury or death: • do not use a three-prong adaptor. • do not insert any objects into the receptacles. (continued) warning! (continued) • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled, it may cause an electric shock and failure...

  • Page 198

    Caution! (continued) • accessories that draw higher power (i.E., coolers, vacuum cleaners, lights, etc.) will degrade the bat- tery even more quickly. Only use these intermit- tently and with great caution. • after the use of high power draw accessories, or long periods of the vehicle not being star...

  • Page 199

    Storage glove compartment and storage bin located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. Rear cupholders storage bins 1 — upper storage bin 2 — lower glove compartment 3 understanding the features of your vehicle 197.

  • Page 200

    To open the lower glove compartment, pull outward on the release handle. Door storage the interior door panels are equipped with lower storage areas. Glove compartment front door storage 198 understanding the features of your vehicle.

  • Page 201

    Console features the floor console contains both an upper and lower storage compartment. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open. To open the lower storage compartment, lift upward on the lower handle to unlatch the lower ...

  • Page 202

    Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices (continued) warning! (continued) should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- ...

  • Page 203

    Press in on the flashlight to release it. To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Flashlight location/press to release three press switch 3 understanding the features of your vehicle 201.

  • Page 204

    Cargo cover the cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. To install the cargo cover, insert either end of the cover into one of the two notches located in the rear trim panels. With one of the cover ends installe...

  • Page 205

    Warning! In a collision a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. Do...

  • Page 206

    Removable load floor the cargo area load floor is removable and can be washed with mild soap and water. Cargo tie-down loops there are four tie-downs (d-rings) installed in the cargo area for securing cargo. Removable load floor cargo area tie-downs 204 understanding the features of your vehicle.

  • Page 207

    Warning! • cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • the weight and position of cargo a...

  • Page 208

    Fold down speakers — if equipped when the liftgate is open, the speakers can swing down off the trim panel to face rearward, for tailgating and other activities. Rear window features rear window wiper/washer the rear wiper/washer is controlled by a rotary switch located on the center portion of the ...

  • Page 209

    Rotate the center portion of the lever upward to the first detent position for rear wiper operation. Note: the rear wiper operates in an intermittent mode only. Rotate the center portion of the lever past the first detent to activate the rear washer. The washer pump and the wiper will continue to op...

  • Page 210

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....

  • Page 211

    The crossbars must also be secured in one of the seven detent positions marked with an arrow on the siderails to prevent movement. To move the crossbars, loosen the thumb screws located at the upper edge of each crossbar approximately eight turns, then move the crossbar to the desired position, keep...

  • Page 212

    Caution! (continued) • to avoid damage to the luggage rack and vehicle, do not exceed the maximum luggage rack load capacity of 150 lb (68 kg). Always distribute heavy loads as evenly as possible and secure the load appropriately. • long loads which extend over the windshield, such as wood panels or...

  • Page 213: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . .214 䡵 instrument cluster . . . . . . . . . . . . . . . . .215 䡵 instrument cluster descriptions . . . . .216 䡵 mini-trip computer — if equipped . . . . .230 ▫ control buttons . . . . . . . . . . . . . . . . ....

  • Page 214

    䡵 uconnect® 230 – am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack) . . . . . . . . . . . . . . . . . . . . . . . . . .245 ▫ operating instructions – radio mode . . . . . . .245 ▫ operation instructions – (disc mode for cd and mp3/wma audio play, dvd-video) . . .253 ▫ notes on playing ...

  • Page 215

    ▫ notes on playing mp3 files . . . . . . . . . . . . . .283 ▫ list button (cd mode for mp3 play) . . . . . . .286 ▫ info button (cd mode for mp3 play) . . . . . .287 ▫ uconnect® (satellite radio) — if equipped . . .287 䡵 ipod®/usb/mp3 control — if equipped . . . . . . . . . . . . . . . . . . . . . ....

  • Page 216

    Instrument panel features 1 — air outlet 5 — storage bin 9 — heated seat switch – if equipped 2 — demisters 6 — glove compartment 10 — hazard warning flasher 3 — instrument cluster 7 — climate controls 11 — esc off switch – if equipped 4 — radio 8 — power outlet 12 — heated seat switch – if equipped...

  • Page 217

    Instrument cluster 4 understanding your instrument panel 215.

  • Page 218

    Instrument cluster descriptions 1. Fuel gauge/fuel door reminder when the ignition switch is in the on/run position, the pointer will show the level of fuel remaining in the fuel tank. The fuel pump sym- bol points to the side of the vehicle where the fuel door is located. 2. Charging system light t...

  • Page 219

    4. Oil pressure warning light this light indicates low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on. Do not operate ...

  • Page 220

    9. High beam indicator this indicator shows that the high beam head- lights are on. Push the multifunction lever for- ward to switch the headlights to high beam, and pull toward yourself (normal position) to return to low beam. 10. Anti-lock brake (abs) light — if equipped this light monitors the an...

  • Page 221

    12. Tachometer the white area of the scale shows the permissible engine revolutions-per-minute (rpm x 1000) for each gear range. Before reaching the red area, ease up on the accelerator to prevent engine damage. 13. Engine temperature warning light this light warns of an overheated engine condi- tio...

  • Page 222

    In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the abs pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capac- ity in the ev...

  • Page 223

    The light also will turn on when the parking brake is applied with the ignition switch in the on/run position. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Transmission temperature warning light this light indicates that the tra...

  • Page 224

    17. Temperature gauge the temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or ...

  • Page 225

    18. Cruise indicator — if equipped this indicator shows that the electronic speed control system is on. 19. 4wd indicator light this light indicates the vehicle is in 4wd locked mode. 20. Shift lever indicator the shift lever indicator is self-contained within the instrument cluster. It displays the...

  • Page 226

    As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (tpms) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illumi- nates, you should stop and c...

  • Page 227

    Caution! The tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, t...

  • Page 228

    Vehicle odometer messages when the appropriate conditions exist, the following odometer messages will display: door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Door ajar gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gate ajar gascap . . . . . . . . . . . . . . . . . . ...

  • Page 229

    Engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the on/run position. To turn off the message temp...

  • Page 230

    Caution! Prolonged driving with the malfunction indicator light (mil) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the mil is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Warni...

  • Page 231

    29. Electronic stability control (esc) activation/ malfunction indicator light — if equipped the “esc activation/malfunction indicator light” in the instrument cluster will come on when the ignition switch is turned to the on/run position. It should go out with the engine running. If the “esc activa...

  • Page 232

    Check, when the ignition key is turned to the on/run position and may stay on for as long as three seconds. When lit solid: there is an 4wd system fault. 4wd performance will be at a reduced level . Service the 4wd system soon. When blinking: the 4wd system is temporarily dis- abled due to overload ...

  • Page 233

    Control buttons step button press the step button located on the steering wheel to scroll through sub menus (i.E., temperature, trip func- tions: odometer, trip a, trip b). Reset button to reset the display shown, turn the ignition switch to the on position, then press and hold the reset button loca...

  • Page 234

    Trip a shows the total distance traveled for trip a since the last reset. Trip b shows the total distance traveled for trip b since the last reset. Electronic vehicle information center (evic) — if equipped the electronic vehicle information center (evic) fea- tures a driver-interactive display that...

  • Page 235

    • vehicle information warning message displays • personal settings (customer-programmable features) • compass heading • outside temperature display • trip computer functions • uconnect® phone displays (if equipped) • audio mode display • tire pressure monitor (tpm) the system allows the driver to se...

  • Page 236

    Menu button press and release the menu button to scroll through the main menus (fuel economy, warn- ings, timer, units, system, personal settings) or to exit sub-menus. Compass button press and release the compass button to display one of eight compass readings and the outside temperature or to exit...

  • Page 237

    • personal settings not avail. — vehicle not in park (automatic transmission) or vehicle is in motion (manual transmission). • door ajar (with vehicle graphic showing which door is open. A single chime sounds if the vehicle is in motion). • doors ajar (with vehicle graphic showing which doors are op...

  • Page 238

    Engine oil change indicator system — if equipped oil change required your vehicle is equipped with an engine oil change indicator system. The “oil change required” message will flash in the evic display for approximately five seconds after a single chime has sounded, to indicate the next scheduled o...

  • Page 239

    Evic functions • compass/temperature/audio • average fuel economy • distance to empty (dte) • units in • elapsed time • tire pressure monitor (tpm) • personal settings to reset the display pressing and holding the select button once will clear the function currently being displayed. Reset will only ...

  • Page 240

    Distance to empty (dte) shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. This is not resettable. Note: significan...

  • Page 241

    Display units of measure in to make your selection, press and release the select button until “english” or “metric” appears. Personal settings (customer-programmable features) this allows the driver to set and recall features when the transmission is in park (automatic transmission) or the vehicle i...

  • Page 242

    Auto lock doors when on is selected, all doors lock automatically when the speed of the vehicle reaches 15 mph (24 km/h). Press and hold the select button when in this display until “on” or “off” appears to make your selection. Auto unlock on exit when on is selected, all the vehicle’s doors will un...

  • Page 243

    Sound horn with lock when on is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be selected with or without the flash lights with lock feature. Press and hold the select button when in this display until “on” or “off” appears to make your sel...

  • Page 244

    Hill start assist (hsa) — if equipped when on is selected, the hsa system is active. Refer to “electronic brake control system” in “starting and operating” for system function and operating informa- tion. To make your selection, press and release the select button until “on” or “off” appears. Displa...

  • Page 245

    Manual compass calibration if the compass appears erratic and the “cal” indicator does not appear in the evic display, you must put the compass into the calibration mode manually as follows: 1. Start the engine. Leave the shift lever in park in order to enter the evic programming menus. 2. Press the...

  • Page 246

    Note: magnetic materials should be kept away from the top of the right rear quarter window. This is where the compass sensor is located. 1. Turn the ignition switch on. 2. Press and hold the compass button for approxi- mately two seconds. 3. Press the down button until “compass variance” message and...

  • Page 247

    Uconnect® 230 – am/fm stereo radio and 6–disc cd/dvd changer (mp3/wma aux jack) operating instructions – radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Press the o...

  • Page 248

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 249

    Clock setting procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, press the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the mi...

  • Page 250

    Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control...

  • Page 251

    Toggle the music type button to select the following format types: program type 16-digit character display no program type or undefined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news n...

  • Page 252

    By pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in the fm mode. If a preset button is activated while in the music type (program type) mode, the...

  • Page 253

    Note: • the available selections for each of the above entries varies depending upon the disc. • these selections can only be made while playing a dvd. • power - allows you to turn the power on and off (if equipped). • lock - locks out rear remote controls (if equipped). • ch1/ch2 - allows the user ...

  • Page 254

    Subtitle language — if equipped selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting ⬙other.⬙ enter the country code using the tune/scroll control knob to s...

  • Page 255

    Set button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, press the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button. If a butt...

  • Page 256

    Caution! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “disc hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the dvd player and other radio internal components. Note: the ignition switch m...

  • Page 257

    Press and hold the eject button for five seconds and all cds will be ejected from the radio. The disc can be ejected with the radio and ignition off. Seek button (cd mode) press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the curre...

  • Page 258

    Supported media (disc types) the mp3/wma file recording media supported by the radio are cdda, cd-r, cd-rw, mp3,wma, dvd video, dvd-r, dvd-rw, dvd+r, dvd+rw, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes ...

  • Page 259

    Supported mp3/wma file formats the radio will recognize only files with the *.Mp3/wma extension as mp3/wma files. Non-mp3/wma files named with the *.Mp3/wma extension may cause play- back problems. The radio is designed to recognize the file as an invalid mp3/wma and will not play the file. When usi...

  • Page 260

    Id3 tag information for artist, song title, and album title are supported for id3 version 1 tags. Id3 version 2 is not supported by the radios. Playlist files are not supported. Mp3 pro files are not supported. Playback of mp3/wma files when a medium containing mp3/wma data is loaded, the radio chec...

  • Page 261

    Info button (disc mode for mp3/wma play) pressing the info button repeatedly will scroll through the following tag information: song title, artist, file name, and folder name (if available). Press the info button once more to return to ⬙elapsed time ⬙ priority mode. Press and hold the info button fo...

  • Page 262

    Time button (auxiliary mode) press the time button to change the display from elapsed playing time to time of day. The time of day will display for five seconds. Rw/ff (auxiliary mode) no function. Set button (auxiliary mode) no function. Operating instructions (voice command system) — if equipped r...

  • Page 263

    Uconnect® (satellite radio) — if equipped satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is sirius satellite radio. This service offers over 130 channels of music, sports, news, entertainme...

  • Page 264

    To access the esn/sid, refer to the following steps: esn/sid access with the ignition switch in the on/run or acc posi- tion and the radio on, press the setup button and scroll using the tune/scroll control knob until sirius id is selected. Press the tune/scroll control knob and the sirius id number...

  • Page 265

    Operating instructions – uconnect® (satellite) mode note: the ignition switch must be in the on/run or acc position to operate the radio. Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek do...

  • Page 266

    Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program format type to be se- lected. Toggle the music type button again to select the music type. ...

  • Page 267

    You may add a second channel to each pushbutton by repeating the above procedure with this exception: press the set button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2. This allows a total of 12 satellite channels to be stored into pushbutton memory. Th...

  • Page 268

    Uconnect® 130 operating instructions – radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electron...

  • Page 269

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 270

    Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control...

  • Page 271

    You may add a second station to each pushbutton by repeating the above procedure with this exception: press the set/rnd button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2 in both am and fm. This allows a total of 12 am and 12 fm stations to be stored i...

  • Page 272

    If you insert a disc with the ignition on and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this cd player will ac...

  • Page 273

    Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pressing and holding the seek ...

  • Page 274

    Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw, mp3, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded...

  • Page 275

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 276

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 277

    Uconnect® 130 with satellite radio operating instructions – radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn of...

  • Page 278

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 279

    Clock setting procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, press the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the mi...

  • Page 280

    Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control...

  • Page 281

    Toggle the music type button to select the following format types: program type 16-digit character display no program type or un- defined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news...

  • Page 282

    By pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in the fm mode. If a preset button is activated while in the music type (program type) mode, the...

  • Page 283

    And 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to ...

  • Page 284

    If you insert a disc with the ignition on and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this cd player will ac...

  • Page 285

    The current selection. Pressing and holding the seek button will allow faster scrolling through the tracks in cd and mp3 modes. Time button press this button to change the display from a large cd playing time display to a small cd playing time display. Rw/ff press and hold ff (fast forward) and the ...

  • Page 286

    Supported media (disc types) the mp3 file recording media supported by the radio are cdda, cd-r, cd-rw, mp3, and cdda+mp3. Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded...

  • Page 287

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 288

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 289

    Info button (cd mode for mp3 play) pressing the info button repeatedly will scroll through the following tag information: song title, artist, file name, and folder name (if available). Press the info button once more to return to ⬙elapsed time ⬙ priority mode. Press and hold the info button for thre...

  • Page 290

    Note: sirius service is not available in hawaii and has limited coverage in alaska. System activation sirius satellite radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your v...

  • Page 291

    Selecting uconnect® (satellite) mode press the sat button until ⬙sat⬙ appears in the display. A cd may remain in the radio while in the satellite radio mode. Satellite antenna to ensure optimum reception, do not place items on the roof around the rooftop antenna location. Metal objects placed within...

  • Page 292

    Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without st...

  • Page 293

    Toggle the music type button again to select the music type. By pressing the seek button when the music type function is active, the radio will be tuned to the next channel with the same selected music type name. If a preset button is activated while in the music type (program type) mode, the music ...

  • Page 294

    Buttons 1 - 6 these buttons tune the radio to the channels that you commit to pushbutton memory (12 satellite stations). Operating instructions (uconnect® phone) — if equipped refer to “uconnect® phone” in “understanding the features of your vehicle.” ipod®/usb/mp3 control — if equipped this feature...

  • Page 295

    Once the audio device is connected and synchronized to the vehicle’s ipod®/usb/mp3 control system (ipod® or external usb device may take a few minutes to connect), the audio device starts charging and is ready for use by pressing radio switches, as described below. Note: if the audio device battery ...

  • Page 296

    Controlling the ipod® or external usb device using radio buttons to get into the ipod®/usb/mp3 control mode and access a connected audio device, either press the “aux” button on the radio faceplate or press the vr button and say ⬙usb⬙ or ⬙switch to usb.⬙ once in the ipod®/usb/ mp3 control mode, audi...

  • Page 297

    • use the seek and seek >> buttons to jump to the previous or next track. Pressing the seek >> button during play mode will jump to the next track in the list, or press the vr button and say ⬙next or previous track. ⬙ • while a track is playing, press the info button to see the associated metadata (...

  • Page 298

    List or browse mode during play mode, pressing any of the buttons described below, will bring up list mode. List mode enables scrolling through the list of menus and tracks on the audio device. • tune control knob: the tune control knob functions in a similar manner as the scroll wheel on the audio ...

  • Page 299

    • pressing a preset button will display the current list on the top line and the first item in that list on the second line. • to exit list mode without selecting a track, press the same preset button again to go back to play mode. • list button: the list button will display the top level menu of th...

  • Page 300

    Bluetooth streaming audio (btsa) music can be streamed from your cellular phone to the uconnect® phone system. Controlling btsa using radio buttons to enter btsa mode, press either “aux” button on the radio or press the vr button and say “bluetooth stream- ing audio.” play mode when switched to btsa...

  • Page 301

    Previous track use the seek down button, or press the vr button on the radio and say “previous track,” to jump to the previous music track on your cellular phone. Browse browsing is not available on a bluetooth streaming audio (btsa) device. Only the current song that is playing will display info. S...

  • Page 302

    Pressing the center button will make the radio switch between the various modes available (am/fm/sat/ cd/hdd/aux etc.). The left-hand control is a rocker-type switch with a push-button in the center. The function of the left-hand control is different depending on which mode you are in. The following...

  • Page 303

    Cd/dvd disc maintenance to keep a cd/dvd in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch...

  • Page 304

    Climate controls the air conditioning and heating system is designed to make you comfortable in all types of weather. Manual heating and air conditioning the manual temperature controls consist of a series of outer rotary dials and inner push knobs. Blower control rotate this control to regulate the...

  • Page 305

    Temperature control rotate this control to regulate the tem- perature of the air inside the passenger compartment. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures. Note: if your air conditionin...

  • Page 306

    • bi-level air is directed through the panel and floor outlets. Note: for all settings, except full cold or full hot, there is a difference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditi...

  • Page 307

    • recirculation control pressing the recirculation control button will put the system in recirculation mode. This can be used when outside conditions such as smoke, odors, dust, or high humidity are pres- ent. Activating recirculation will cause the led in the control button to illuminate. Note: • c...

  • Page 308

    Note: the air conditioning compressor will not engage until the engine has been running for about 10 seconds. • max a/c for maximum cooling use the a/c and recirculation buttons at the same time. • economy mode if economy mode is desired, press the a/c button to turn off the indicator light and the ...

  • Page 309

    Automatic operation operation of the system is quite simple. 1. Turn the mode control knob (on the right) and the blower control knob (on the left) to auto. Note: the auto position performs best for front seat occupants only. 2. Dial in the temperature you would like the system to maintain by ro- ta...

  • Page 310

    • if your air conditioning performance seems lower than expected, check the front of the a/c condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduc...

  • Page 311

    4 understanding your instrument panel 309.

  • Page 312

    The operator can override the auto mode setting to change airflow distribution by rotating the mode control knob (on the right) to one of the following positions. • panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center in...

  • Page 313

    • air conditioner control press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control dial. Press this but- ton a second time to turn off the air conditionin...

  • Page 314

    • most of the time, when in automatic operation, you can temporarily put the system into recirculation mode by pressing the recirculation button. However, under certain conditions, while in automatic mode, the system is blowing air out the defrost vents. When these conditions are present, and the re...

  • Page 315

    Winter operation use of the air recirculation mode during winter months is not recommended because it may cause window fogging. Vacation storage anytime you store your vehicle, or keep it out of service (i.E., vacation) for two weeks or more, run the air conditioning system at idle for about five mi...

  • Page 316

    Side window demisters a side window demister outlet is located at each end of the instrument panel. These non-adjustable outlets direct air toward the side windows when the system is in the floor, mix, or defrost mode. The air is directed at the area of the windows through which you view the outside...

  • Page 317

    Control setting suggestions for various weather conditions 4 understanding your instrument panel 315.

  • Page 319: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . .322 ▫ manual transmission — if equipped . . . . . . .322 ▫ automatic transmission — if equipped . . . . .323 ▫ normal starting. . . . . . . . . . . . . . . . . . . . . . .323 ▫ extreme cold weather (below –20°f or −...

  • Page 320

    䡵 autostick® (six-speed automatic transmission) — if equipped . . . . . . . . . .342 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . . .343 䡵 autostick® (cvt) — if equipped . . . . . . .344 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . . .345 䡵 four-wheel drive operatio...

  • Page 321

    ▫ electronic stability control (esc) . . . . . . . . . .371 ▫ esc activation/malfunction indicator light and esc off indicator light . . . . . . . . . . . .375 䡵 tire safety information . . . . . . . . . . . . .376 ▫ tire markings . . . . . . . . . . . . . . . . . . . . . . . .376 ▫ tire identificat...

  • Page 322

    䡵 tire rotation recommendations . . . . .398 䡵 tire pressure monitoring system (tpms) . . . . . . . . . . . . . . . . . . . . . . .400 ▫ base system . . . . . . . . . . . . . . . . . . . . . . . . .403 ▫ premium system — if equipped . . . . . . . . . . .405 ▫ general information . . . . . . . . . . ...

  • Page 323

    ▫ towing requirements . . . . . . . . . . . . . . . . . .425 ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . .430 䡵 recreational towing (behind motorhome, etc.) . . . . . . . . . . . . . . . . . . .432 ▫ towing this vehicle behind another vehicle . .432 5 starting and operating 321.

  • Page 324

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • before exiting a vehicle, always apply the parking brake, shift the transmission into park, and re- move the key fob from the ignition. When leaving the ...

  • Page 325

    Automatic transmission — if equipped the shift lever must be in the park or neutral position before you can start the engine. Depress the brake pedal before shifting to any driving gear. Note: you must press the brake pedal before shifting out of park. Tip start do not press the accelerator. Turn th...

  • Page 326

    Extreme cold weather (below –20°f or −29°c) to ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is recommended. If engine fails to start if the engine fails to start after you have followed the “normal...

  • Page 327

    Engine block heater — if equipped the engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt ac electrical outlet with a grounded, three-wire extension cord. The engine block heater must be plugged in at least one hour to have an...

  • Page 328

    Use each gear in numerical order, do not skip a gear. Be sure the transmission is in first gear, (not third), when starting from a standing position. Damage to the clutch can result from starting in a gear higher than first gear. Caution! • launching in any gear except 1st gear will result in excess...

  • Page 329

    Never shift into reverse until the vehicle has come to a complete stop. Note: during cold weather, until the transmission lubri- cant is warm, you may experience slightly higher shift efforts. This is normal and not harmful to the transmission. Recommended shift speeds to use your manual transmissio...

  • Page 330

    Downshifting proper downshifting will improve fuel economy and prolong engine life. Caution! If you skip a gear while downshifting or downshift at too high of a vehicle speed, these conditions may cause the engine to overspeed if too low of a gear is selected and the clutch pedal is released. Damage...

  • Page 331

    Warning! • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. • before exiting a vehicle, always apply the parking brake, shift the transmission into park, turn the engine off, and remove the ...

  • Page 332

    Key ignition park interlock this vehicle is equipped with a key ignition park inter- lock which requires the transmission to be in park before the ignition switch can be turned to the lock position. The key can only be removed from the ignition when the ignition is in the lock position, and once rem...

  • Page 333

    Only shift from drive to park or reverse when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has only park, reverse, neutral, and drive shift positions. Manual shifts can be ma...

  • Page 334

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 335

    Warning! (continued) • allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Chil- dren should be warned not to touch the parking brake, brake pedal or the shift lever. • do not leave the key fob in or near the ...

  • Page 336

    Reverse (r) this range is for moving the vehicle backward. Shift into reverse only after the vehicle has come to a complete stop. Neutral (n) use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Apply the parking brake an...

  • Page 337

    When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading condi- tions, in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the autostick® shift control (refer to “autostick®” in this section for further information) to se...

  • Page 338

    In the event of a momentary problem, the transmission can be reset to regain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift the transmission into park. 3. Turn the ignition switch to the lock/off position. 4. Wait approximately 10 seconds. 5. Restart the engine. 6...

  • Page 339

    Torque converter clutch a feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automati- cally at calibrated speeds. This may result in a slightly different feeling or response during normal operation i...

  • Page 340

    The transmission shift lever has park, reverse, neu- tral, and drive shift positions. Manual shifts can be made using the autostick® shift control (refer to ⬙autostick®⬙ in this section). Moving the shift lever to the left or right (-/+) while in the drive position will manually select from a set of...

  • Page 341

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 342

    Warning! (continued) • do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. Caution! • before moving the shift lever out of park, you must place the ignition from the lock/off posi- tion to...

  • Page 343

    Neutral (n) use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Apply the parking brake and shift the transmission into park if you must leave the vehicle. Warning! Do not coast in neutral and never turn off the ignition...

  • Page 344

    When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading condi- tions, in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the autostick® shift control (refer to ⬙autostick® (cvt)⬙ in this section for further information)...

  • Page 345

    Operation when the shift lever is in the drive position, the transmission will operate automatically, shifting between the six available gears. To engage autostick®, simply tap the shift lever to the right or left (+/-) while in the drive position. Tapping (-) to enter autostick® mode will downshift...

  • Page 346

    • if a requested downshift would cause the engine to overspeed, that shift will not occur. • avoid using speed control when autostick® is en- gaged. • transmission shifting will be more noticeable when autostick® is engaged. • the system may revert to automatic shift mode if a fault or overheat cond...

  • Page 347

    Operation note: autostick® is not available until the cvt warms up in cold weather. When the shift lever is in the drive position, autostick® is activated by moving the shift lever side-to-side. Mov- ing the shift lever to the right (+) will activate autostick® and shift up to the next higher manual...

  • Page 348

    • heavy anti-lock brake system (abs) application will disengage autostick® mode. • the system may revert to automatic shift mode if a fault or overheat condition is detected. To disengage autostick® mode, hold the shift lever to the right (+) until “d” is once again displayed in the instru- ment clu...

  • Page 349

    Where one or more wheels have wheel spin or if addi- tional traction is needed in sand, deep snow, or loose traction surfaces, activate the “4wd lock” switch by pulling up once and releasing. This locks the center coupling allowing more torque to be sent to the rear wheels. The “4wd indicator light”...

  • Page 350

    Off-road driving tips you will encounter many types of terrain driving off- road. You should be familiar with the terrain and area before proceeding. There are many types of surface conditions: hard packed dirt, gravel, rocks, grass, sand, mud, snow and ice. Every surface has a different effect on y...

  • Page 351

    When to use low (l off-road) with the 4wd lock lever engaged when driving off-road, shift into low (l off-road) and activate the 4wd lock. This will provide additional traction and activates the numerous off-road features to improve handling and control on slippery or difficult terrain. Due to the s...

  • Page 352

    Caution! On icy or slippery roads, do not downshift at high engine rpm’s or vehicle speeds because engine brak- ing may cause skidding and loss of control. Mud deep mud creates a great deal of suction around the tires and is very difficult to get through. You should use low (l off-road) with the 4wd...

  • Page 353

    Caution! Reduced tire pressures may cause tire unseating and total loss of air pressure. To reduce the risk of tire unseating, while at a reduced tire pressure, reduce your speed and avoid sharp turns or abrupt maneu- vers. Hill climbing hill climbing requires good judgment and a good under- standin...

  • Page 354

    If the front end begins to bounce, ease off the throttle slightly to bring all four tires back on the ground. As you approach the crest of the hill, ease off the throttle and slowly proceed over the top. If the wheels start to slip as you approach the crest of a hill, ease off the accelerator and ma...

  • Page 355

    Driving across an incline if at all possible avoid driving across an incline. If it is necessary, know your vehicle’s abilities. Driving across an incline places more weight on the down-hill wheels, which increases the possibilities of a down-hill slide or rollover. Make sure the surface has good tr...

  • Page 356

    Driving through water extreme care should be taken crossing any type of water. Water crossings should be avoided if possible, and only be attempted when necessary in a safe responsible man- ner. You should only drive through areas which are designated and approved. You should tread lightly and avoid...

  • Page 357

    Before you cross any type of water as you approach any type of water, you need to determine if you can cross it safely and responsibly. If necessary, get out and walk through the water or probe it with a stick. You need to be sure of its depth, approach angle, current and bottom condition. Be carefu...

  • Page 358

    After driving off-road off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage. That way you can get any problems taken care of right away and have your vehicle ready when you need it. • completely inspect...

  • Page 359

    • if you experience unusual vibration after driving in mud, slush or similar conditions, check the wheels for impacted material. Impacted material can cause a wheel imbalance and freeing the wheels of it will correct the situation. Power steering the standard power steering system will give you good...

  • Page 360

    Caution! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. Power steering fluid check checking the power steering fluid level at a define...

  • Page 361

    Parking brake before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave an automatic transmission in park, or manual transmission in reverse or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the le...

  • Page 362

    Note: • when the parking brake is applied and the automatic transmission is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • this light only shows that ...

  • Page 363

    Warning! (continued) • always fully apply the parking brake when leav- ing your vehicle or it may roll and cause damage or injury. Also, be certain to leave an automatic trans- mission in park, a manual transmission in re- verse or first gear. Failure to do so may cause the vehicle to roll and cause...

  • Page 364

    If either of the two hydraulic systems lose normal capa- bility, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop. In addition, if the malfuncti...

  • Page 365

    Warning! (continued) • the abs cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. • the capabilities of an abs-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize th...

  • Page 366

    Abs is activated during braking under certain road or stopping conditions. Abs-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You may also experience the following when the brake system goes into anti-lock mode: • the abs motor running (it ...

  • Page 367

    Electronic brake control system your vehicle may be equipped with an optional ad- vanced electronic brake control system that includes anti-lock brake system (abs), traction control system (tcs), brake assist system (bas), electronic roll mitiga- tion (erm), hill descent control (hdc), hill start as...

  • Page 368

    Traction control system (tcs) this system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the tcs system functions si...

  • Page 369

    Warning! • the brake assist system (bas) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevail- ing road conditions. • the bas cannot prevent collisions, including those resulting from excessive speed in turns, driving on very sli...

  • Page 370

    Note: anytime the esc system is in the “full off” mode, erm is disabled. Refer to “electronic stability control (esc)” in this section for a complete explanation of the available esc modes. Warning! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance...

  • Page 371

    Hdc has the capability to sense terrain and will only activate when the vehicle is descending a hill. It will not activate on level ground. If desired, hdc can be fully deactivated by putting the vehicle into esc “full off” mode. This is done by pressing and holding the “esc off” button for five sec...

  • Page 372

    Hsa activation criteria the following criteria must be met in order for hsa to activate: • vehicle must be stopped. • vehicle must be on a 7% (approximate) grade or greater hill. • gear selection matches vehicle uphill direction (i.E., vehicle facing uphill is in forward gear; vehicle back- ing uphi...

  • Page 373

    5. Release the clutch pedal (if equipped). 6. Rotate the steering wheel one-half turn to the left. 7. Press the “esc off” switch (located in the lower switch bank below the climate controls) four times within 20 seconds. The “esc activation/malfunction indicator light” should turn on and turn off tw...

  • Page 374

    Warning! • the electronic stability control (esc) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • esc cannot prevent accidents, including those re- sulting from excessive speed in turns, driving on ve...

  • Page 375

    Partial off (four-wheel drive models) or on (two-wheel drive models) this mode is entered by momentarily pressing the “esc off” switch. When in “partial off” mode, the tcs portion of esc, except for the “limited slip” feature described in the tcs section, has been disabled and the ⬙esc off indicator...

  • Page 376

    Full off (four-wheel drive models only) this mode is intended for off-highway or off-road use when esc stability features could inhibit vehicle maneu- verability due to trail conditions. This mode is entered by pressing and holding the “esc off” switch for five seconds when the vehicle is stopped an...

  • Page 377

    Warning! With the esc in the ⴖfull offⴖ mode, the engine torque reduction and stability features are disabled. Therefore, the enhanced vehicle stability offered by esp is unavailable. In an emergency evasive maneu- ver, the esc system will not engage to assist in maintaining stability. “esc off” mod...

  • Page 378

    Note: • the “esc off indicator light” and the “esc activation/ malfunction indicator light” come on momentarily each time the ignition switch is turned on. • each time the ignition is cycled on, the esc system will be on even if it was cycled off previously. • the esc system will make buzzing or cli...

  • Page 379

    Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...

  • Page 380

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ....Blank....ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t or s = temporary spare tire 31 = overall diameter in inches (in) 215 ...

  • Page 381

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 382

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 383

    Example: dot ma l9 abcd 0301 01 = number representing the year in which the tire was manufactured (two digits) — 01 means the year 2001 — prior to july 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could represen...

  • Page 384

    Term definition maximum inflation pressure the maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall. Recommended cold tire inflation pressure vehicle manufacturer’s recommended cold tire inflation...

  • Page 385

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Tire and loading information placard this placard tells you important information about the: ...

  • Page 386

    3) tire size designed for your vehicle. 4) cold tire inflation pressures for the front, rear, and spare tires. Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to t...

  • Page 387

    4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 ...

  • Page 388

    386 starting and operating.

  • Page 389

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 390

    Warning! (continued) • unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear pat- terns...

  • Page 391

    Tire inflation pressures the proper cold tire inflation pressure is listed on the driver’s side “b” pillar or rear edge of the driver’s side door. At least once a month: • check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judgement when determining p...

  • Page 392

    Example: if garage temperature = 68°f (20°c) and the outside temperature = 32°f (0°c) then the cold tire inflation pressure should be increased by 3 psi (21 kpa), which equals 1 psi (7 kpa) for every 12°f (7°c) for this outside temperature condition. Tire pressure may increase from 2 to 6 psi (13 to...

  • Page 393

    Tire repair if your tire becomes damaged, it may be repaired if it meets the following criteria: • the tire has not been driven on when flat. • the damage is only on the tread section of your tire (sidewall damage is not repairable). • the puncture is no greater than ¼⬙ (6 mm). Consult an authorized...

  • Page 394

    Use summer tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Snow tires some areas of the country require the use of snow tires during the winter. Snow tires can be identified by a mountain/snowflake symbol on the tire sidewall. If you need sn...

  • Page 395

    Compact spare tire — if equipped the compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on the tire and loading information placard located on the driver’s side door opening or on the sidewall ...

  • Page 396

    Full size spare — if equipped the full size spare is for temporary emergency use only. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not. This spare tire may have limited tread life. When the tread is worn to the tread wear indicators, the ...

  • Page 397

    Tire spinning when stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping. Refer to “freeing a stuck vehicle” in “what to do in emergencies” for further information. Warning! Fast spinning ti...

  • Page 398

    These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to “replacement tires” in this section for further infor- mation. Life of t...

  • Page 399

    Replacement tires the tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when r...

  • Page 400

    Warning! (continued) • never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision. • failure to equip your vehicle wi...

  • Page 401

    These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow and wet traction levels, and contribute to a smooth, quiet ...

  • Page 402

    Tire pressure monitoring system (tpms) the tire pressure monitor system (tpms) will warn the driver of a low tire pressure based on the vehicle recom- mended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (7.0 kpa) for every 12°f (6.5°c). This means that when the ...

  • Page 403

    For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kpa). If the ambient temperature is 68°f (20°c) and the measured tire pressure is 27 psi (186 kpa), a temperature drop to 20°f (-7°c) will decrease the tire pressure to approximat...

  • Page 404

    Caution! (continued) • after inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the tire pressure moni- toring sensor. Note: • the tpms is not intended to replace normal tire care and ma...

  • Page 405

    Base system this is the tpms warning indicator located in the instrument cluster. The tpms uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure lev- els. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver m...

  • Page 406

    Check tpms warnings the tire pressure monitoring telltale light will flash on and off for 75 seconds and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The ti...

  • Page 407

    4. For each subsequent ignition key cycle, a chime will sound and the tire pressure monitoring telltale light will flash on and off for 75 seconds and then remain on solid. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the tp...

  • Page 408

    Tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low. The audible chime will sound once every ignition cycle for th...

  • Page 409

    Display to the vehicle’s recommended cold placard pres- sure value. The system will automatically update, the “low tire” text message will no longer be displayed, the graphic display of the pressure value(s) will stop flashing, and the tire pressure monitoring light will extinguish once the updated ...

  • Page 410

    If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the tire pressure monitoring telltale light will no longer flash, the ⬙service tpm system⬙ text message will not be present, and a pressure value will be displayed...

  • Page 411

    2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warn- ing limit, upon the next ignition key cycle, a chime will sound and the tire pressure monitoring telltale light will still turn on due to the low tire. The “low tire” text message and th...

  • Page 412

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept any interference received, including interference that may cause undesi...

  • Page 413

    Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the world- wide fuel charter, wwfc) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recom- mends the use of gasolines...

  • Page 414

    E-85 usage in non-flex fuel vehicles non-flex fuel vehicle (ffv) is compatible with gasoline containing 10% ethanol (e10). Gasoline with higher etha- nol content may void the new vehicle limited warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all o...

  • Page 415

    Materials added to fuel all gasoline sold in the united states is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the f...

  • Page 416

    Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such...

  • Page 417

    After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door. This keeps the gas cap suspended away from and protects the vehicle’s surface. Caution! • damage to the fuel system or emission control system could result from using an improper fuel tank filler c...

  • Page 418

    Warning! • never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the mil to turn on. • a fire may result if gaso...

  • Page 419

    Vehicle loading as required by national highway traffic safety admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or b-pillar. Vehicle certification label your vehicle has a vehicle certification label attached to the driver’s door b-pillar. The la...

  • Page 420

    Inflation pressure this is the cold tire inflation pressure for your vehicle for all loading conditions up to full gawr. Curb weight the curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants ...

  • Page 421

    Caution! Do not load your vehicle any heavier than the gvwr. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle. Trailer towing in this section you will find safety ti...

  • Page 422

    Gross combination weight rating (gcwr) the gcwr is the total permissible weight of your vehicle and trailer when weighed in combination. Gross axle weight rating (gawr) the gawr is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure t...

  • Page 423

    Weight-carrying hitch a weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they are commonly used to tow small and medium sized...

  • Page 424

    Warning! • an improperly adjusted weight distributing hitch system may reduce handling, stability, braking performance, and could result in a collision. • weight distributing systems may not be compatible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable recr...

  • Page 425

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/transmission frontal area maximum gtw (gross trailer wt.) maximum tongue wt. (see note) 2.0l auto/man 22 sq ft (2.04 sq m) 1,000 lbs (450 ...

  • Page 426

    Note: the trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the tire and loading information placard. Refer to “tire safety information” in “starting and operating” for further information. Trailer and ton...

  • Page 427

    Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “tire and loading information” placard for the maximum combine...

  • Page 428

    Warning! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may ...

  • Page 429

    Warning! (continued) • total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. Gvwr 2. Gtw 3. Gawr 4. Tongue weight rating for the trailer hitch uti- lized. Towing requirements – tires • do not attempt to tow a trailer while ...

  • Page 430

    Towing requirements – trailer brakes • do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • an electronically actuated trailer brake controller is required when towing a trailer w...

  • Page 431

    Warning! (continued) • towing any trailer will increase your stopping distance. When towing you should allow for addi- tional space between your vehicle and the vehicle in front of you. Failure to do so could result in a collision. Towing requirements – trailer lights and wiring whenever you pull a ...

  • Page 432

    Towing tips before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Manual transmission – if equipped if using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippag...

  • Page 433

    Note: using a lower gear ratio while operating the vehicle under heavy loading conditions, will improve performance and extend transmission life by reducing excessive shifting and heat buildup. This action will also provide better engine braking. If you regularly tow a trailer for more than 45 minut...

  • Page 434

    Cooling system to reduce potential for engine and transmission over- heating, take the following actions: city driving when stopped for short periods of time, shift the trans- mission into neutral and increase engine idle speed. Highway driving reduce speed. Air conditioning turn off temporarily. Re...

  • Page 435

    Note: vehicles equipped with manual transmissions may be recreationally towed (flat towed) at any legal highway speed, for any distance, if the manual transmis- sion is in neutral and the ignition key is in the acc position. Caution! • do not flat tow any vehicle equipped with an automatic transmiss...

  • Page 437: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . .437 䡵 if your engine overheats . . . . . . . . . . . .437 䡵 automatic transmission overheating . . . . . . . . . . . . . . . . . . . . . . .438 䡵 wheel and tire torque specifications . . . . . . . . . . . . . . . . . ....

  • Page 438

    ▫ jump-starting procedure . . . . . . . . . . . . . . . .464 䡵 freeing a stuck vehicle . . . . . . . . . . . . .466 䡵 shift lever override . . . . . . . . . . . . . . . .467 䡵 towing a disabled vehicle. . . . . . . . . . .468 ▫ with ignition key . . . . . . . . . . . . . . . . . . . . .470 436 what ...

  • Page 439

    Hazard warning flashers the hazard warning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the hazard warning flasher. When the switch is activated, all direc- tional turn signals will flash on and off to warn oncoming traffic of an emergency. Press th...

  • Page 440

    Caution! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the h (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the n...

  • Page 441

    Wheel and tire torque specifications proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle the lug nuts/bolts should be torqued using a properly calibrated torque wrench. Torque speci...

  • Page 442

    Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten...

  • Page 443

    Warning! (continued) • being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be ra...

  • Page 444

    Spare tire stowage the compact spare tire is stowed under the rear load floor in the cargo area. Spare tire removal lift up the load floor cover and remove the hold down. Preparations for jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. Warning! Do not attempt to ...

  • Page 445

    Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the ...

  • Page 446

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. Jack warning label jacking locations 444 what to do in emergencies.

  • Page 447

    Note: refer to “tires — general information” in “start- ing and operating” for further information about the spare tire, it’s use, and operation. 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wr...

  • Page 448

    Note: there are front and rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts on one of the flanges in the sill flange assembly. The rear location is the same but with two rectangular cutouts. For vehicles equipped with plastic trim, the plasti...

  • Page 449

    Warning! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 4. Using the swivel wrench raise the vehicle by turning the jack screw to the right. Raise the vehicle only unti...

  • Page 450

    Caution! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. Warning! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. Note: the wheel cover is held on th...

  • Page 451

    8. Remove the wheel blocks and lower the jack until it is free. Release the parking brake. Reassemble the lug wrench to the jack assembly and stow it in the spare tire area. Secure the assembly using the means pro- vided. Warning! A loose tire or jack thrown forward in a collision or hard stop could...

  • Page 452

    3. Install the five wheel lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in pe...

  • Page 453

    5. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Refer to “torque specifications” in this sec- tion for correct lug nut torque. 6. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are pro...

  • Page 454

    Tirefit kit — if equipped small punctures up to 1/4 in (6 mm) in the tire tread can be sealed with tirefit. Foreign objects (e.G., screws or nails) should not be removed from the tire. Tirefit can be used in outside temperatures down to approximately -4°f (-20°c). This kit will provide a temporary t...

  • Page 455

    3. Pressure gauge 4. Power button 5. Mode select knob 6. Sealant hose (clear) 7. Air pump hose (black) 8. Power plug using the mode select knob and hoses your tirefit kit is equipped with the following symbols to indicate the air or sealant mode. Selecting air mode turn the mode select knob (5) to t...

  • Page 456

    Tirefit usage precautions • using the tirefit sealant may cause the tire pressure monitoring system (tpms) to become inoperable. It is recommended that you take your vehicle to an autho- rized dealer to have the sensor function checked. • replace the tirefit sealant bottle (1) and sealant hose (6) p...

  • Page 457

    Warning! • do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the tirefit kit. • do not use tirefit or drive the vehicle under the following circumstances: – if the puncture in the tire tread is approx...

  • Page 458

    Warning! (continued) • tirefit sealant solution contains latex. In case of an allergic reaction or rash, consult a physician immediately. Keep tirefit out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a phy...

  • Page 459

    5. Uncoil the power plug (8) and insert the plug into the vehicle’s 12 volt power outlet. Note: do not remove foreign objects (e.G., screws or nails) from the tire. (c) injecting tirefit sealant into the deflated tire: • always start the engine before turning on the tire- fit kit. Note: manual trans...

  • Page 460

    Note: if the mode select knob (5) is on air mode and the pump is operating, air will dispense from the air pump hose (7) only, not the sealant hose (6). If the sealant (white fluid) does flow through the sealant hose (6): 1. Continue to operate the pump until sealant is no longer flowing through hos...

  • Page 461

    3. Immediately disconnect the sealant hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the tirefit kit in the vehicle storage location. Quickly proceed to (d) “drive ve- hicle.” caution! • the metal end fitting from power plug (8) may get hot after use...

  • Page 462

    (e) after driving: pull over to a safe location. Refer to “whenever you stop to use tirefit” before continuing. 1. Turn the mode select knob (5) to the air mode position. 2. Uncoil the power plug and insert the plug into the vehicle’s 12 volt power outlet. 3. Uncoil the air pump hose (7) (black in c...

  • Page 463

    5. Replace the sealant bottle (1) and sealant hose (6) assembly at your authorized dealer as soon as possible. Refer to “(f) sealant bottle and hose replacement.” note: when having the tire serviced, advise the autho- rized dealer or service center that the tire has been sealed using the tirefit ser...

  • Page 464

    Note: when using a portable battery booster pack follow the manufacturer’s operating instructions and precautions. Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electr...

  • Page 465

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You co...

  • Page 466

    3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is off. Warning! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-start...

  • Page 467

    4. Connect the opposite end of the negative (-) jumper cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery and the fuel injection system. Warning! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting...

  • Page 468

    If frequent jump-starting is required to start your vehicle you should have the battery and charging system in- spected at your authorized dealer. Caution! Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Ev...

  • Page 469

    Note: press the ⬙esc off⬙ switch, to place the electronic stability control (esc) system in ⬙partial off⬙ mode, before rocking the vehicle. Refer to “electronic brake control” in “starting and operating” for further infor- mation. Once the vehicle has been freed, press the ⬙esc off ⬙ switch again to...

  • Page 470

    3. Using a small screwdriver or similar tool, remove the shift lever override access cover (located on the right side of the shifter housing). 4. Turn the ignition switch to the acc or on/run position, but do not start the engine. 5. Press and maintain firm pressure on the brake pedal. 6. Insert the...

  • Page 471

    Towing condition wheels off the ground manual transmission automatic transmission (fwd only) automatic transmission 4wd flat tow none • transmission in neutral • key in acc or on/run position if transmission is operable: • transmission in neutral • 25 mph (40 km/h) max speed • 15 miles (24 km) max d...

  • Page 472

    With ignition key automatic transmission • front wheel drive (fwd) vehicles can be towed with the front wheels elevated, or on a flatbed truck (all four wheels off the ground). • four-wheel drive (4wd) vehicles can be towed on a flatbed truck (all four wheels off the ground). If the transmission is ...

  • Page 473

    Manual transmission • front wheel drive (fwd) or four-wheel drive (4wd) vehicles can be flat towed (all four wheels on the ground) with the transmission in neutral. • fwd vehicles can be towed with the front wheels elevated. • fwd or 4wd vehicles can be towed on a flatbed truck (all wheels off the g...

  • Page 475: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 2.0l . . . . . . . . . .475 䡵 engine compartment — 2.4l . . . . . . . . . .476 䡵 onboard diagnostic system — obd ii . .477 ▫ loose fuel filler cap message . . . . . . . . . . . .477 䡵 emissions inspection and maintenance programs . . . . . . ....

  • Page 476

    ▫ automatic transmission (six-speed) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .502 ▫ automatic transmission (cvt) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .504 ▫ manual transmission — if equipped . . . . . . .506 ▫ rear drive assembly (rda) — awd/ 4w...

  • Page 477

    Engine compartment — 2.0l 1 — washer fluid reservoir 6 — air cleaner filter 2 — power steering fluid reservoir 7 — coolant pressure cap 3 — engine oil fill 8 — engine oil dipstick 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — integrated power module (fuses) 7 maintaining your vehicle 47...

  • Page 478

    Engine compartment — 2.4l 1 — washer fluid reservoir 6 — air cleaner filter 2 — power steering fluid reservoir 7 — coolant pressure cap 3 — engine oil fill 8 — engine oil dipstick 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — integrated power module (fuses) 476 maintaining your vehicle.

  • Page 479

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 480

    Persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the mil. Resolving the problem will turn the mil light off. Emissions inspection and maintenance programs in some localities, ...

  • Page 481

    3. Approximately 15 seconds later, one of two things will happen: • the mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m ...

  • Page 482

    Dealer service your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service opera- tions in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting...

  • Page 483

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, power steering...

  • Page 484

    Caution! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil. Change engine oil the oil change i...

  • Page 485

    Caution! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the new vehicle limited warranty. Engine oil viscosity (sae grade) mopar® sae 5w-20 engine oil or equivalent pennzoil® or shell helix® is recommended for all operating tem- ...

  • Page 486

    Disposing of used engine oil and oil filters care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment. Contact your authorized dealer, service sta- tion or governmental agenc...

  • Page 487

    Engine air cleaner filter selection the quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be used to assure most efficient service. Mopar® engine air cleaner filters are a high quality filter and are recommended. Maintenance-free battery your veh...

  • Page 488

    Caution! • it is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be ...

  • Page 489

    Warning! • use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Re...

  • Page 490

    A/c air filter refer to the “maintenance schedule” for the proper maintenance intervals. Warning! Do not remove the a/c air filter while the blower is operating or personal injury may result. The a/c air filter is located in the fresh air inlet behind the glove box. Perform the following procedure t...

  • Page 491

    6. Install the a/c air filter with the arrow on the filter pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover. Caution! The a/c air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly i...

  • Page 492

    Windshield wiper blades clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumula- tions of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the w...

  • Page 493

    Warning! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust system the best protection against carbon monoxide entry into the vehicle body is a properly maintained engine ...

  • Page 494

    Caution! • the catalytic converter requires the use of un- leaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine perfor- mance and cause serious damage to the engine. • damage to the catalytic converter can res...

  • Page 495

    To minimize the possibility of catalytic converter dam- age: • do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • do not try to start the engine by pushing or towing the vehicle. • do not idle the engine with any spark plug wires di...

  • Page 496

    Coolant checks check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh engine coolant (anti- freeze). Chec...

  • Page 497

    Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oat) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic additive technology (oat) engine cool- ant is different and should not be mixed with hybri...

  • Page 498

    Adding coolant your vehicle has been built with an improved engine coolant (oat coolant conforming to ms-12106) that allows extended maintenance intervals. This engine coolant (anti- freeze) can be used up to ten years or 150,000 miles (240,000 km) before replacement. To prevent reducing this extend...

  • Page 499

    Note: • some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer. • mixing engine coolant (antifreeze) types is not r...

  • Page 500

    Disposal of used engine coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals or children, do not store ethylene glycol...

  • Page 501

    If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • do not overfill the coolant expansion bottle. • check the coolant freeze point in the radiator and in the coolant expansion bottle. If engine c...

  • Page 502

    Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 503

    Warning! • use only manufacturer’s recommended brake fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its perfor- mance. The proper type of brake flui...

  • Page 504

    Automatic transmission (six-speed) — if equipped selection of lubricant (six-speed transmission) it is important to use the proper transmission fluid to ensure optimum transmission performance and life. Use only the manufacturer’s recommended transmission fluid. Refer to “fluids, lubricants, and gen...

  • Page 505

    Caution! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the new vehicle limited warranty. Fluid level check the fluid level is preset at the factory and does not require adjustment under normal operating cond...

  • Page 506

    Automatic transmission (cvt) — if equipped selection of lubricant (cvt) it is important to use the proper transmission fluid to ensure optimum transmission performance and life. Use only the manufacturer’s recommended transmission fluid which has the special friction coefficient additives necessary ...

  • Page 507

    Special additives the manufacturer strongly recommends against using any special additives in the transmission. Automatic transmission fluid is an engineered product and its performance may be impaired by supplemental additives. Therefore, do not add any fluid additives to the transmission. The only...

  • Page 508

    Fluid and filter changes refer to the ⬙maintenance schedule⬙ for the proper maintenance intervals. In addition, change the fluid and filter if the transmission is disassembled for any reason. Manual transmission — if equipped lubricant selection use only the manufacturers recommended transmission fl...

  • Page 509

    Fluid level check visually inspect the unit at each oil change for leakage. If leakage is detected, check the fluid level by removing the fill plug. The fluid level should be maintained between the bottom of the fill hole to 1/8 in (4 mm) below the fill hole. Add fluid, if necessary, to maintain the...

  • Page 510

    Appearance care and protection from corrosion protection of body and paint from corrosion vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and road surfaces during other seasons a...

  • Page 511

    • if insects, tar, or other similar deposits have accumu- lated on your vehicle, use mopar® super kleen bug and tar remover to remove. • use a high quality cleaner wax, such as mopar® cleaner wax to remove road film, stains and to protect your paint finish. Take care never to scratch the paint. • av...

  • Page 512

    • if you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • if a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • use mopar® touch up paint on scratches as soon as possible. You...

  • Page 513

    Stain repel fabric cleaning procedure – if equipped stain repel seats may be cleaned in the following man- ner: • remove as much of the stain as possible by blotting with a clean, dry towel. • blot any remaining stain with a clean, damp towel. • for tough stains, apply mopar® total clean, or a mild ...

  • Page 514

    Warning! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Caution! Do not use alcohol and alcohol-based and/or keton based cleaning products to clean leather seats, as damage to the seat may result. Clean...

  • Page 515

    When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror. Instrument panel cover the instrument panel cover has a low glare surface which minimizes reflections on the windshield. Do not use protectants or other products whi...

  • Page 516

    Fuses warning! • when replacing a blown fuse, always use an appro- priate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may re...

  • Page 517

    Cav- ity cartridge fuse mini-fuse description 1 empty empty 2 15 amp lt blue awd/4wd con- trol module – if equipped 3 10 amp red rear center brake light switch 4 10 amp red ignition switch/ occupant classifi- cation module 5 20 amp yellow trailer tow – if equipped 6 10 amp red power mirror/ steering...

  • Page 518

    Cav- ity cartridge fuse mini-fuse description 7 30 amp green ignition off draw 8 30 amp green ignition off draw 9 40 amp green power seats 10 20 amp yellow power locks/ interior lighting 11 15 amp lt blue power outlet 12 20 amp yellow 115v ac inverter – if equipped 13 20 amp yellow cigar lighter cav...

  • Page 519

    Cav- ity cartridge fuse mini-fuse description 21 10 amp red intrusion module/siren – if equipped 22 10 amp red heating, ac/ compass 23 15 amp lt blue auto shutdown relay 24 15 amp lt blue power sunroof – if equipped 25 10 amp red heated mirror – if equipped 26 15 amp lt blue auto shutdown relay 27 1...

  • Page 520

    Cav- ity cartridge fuse mini-fuse description 34 30 amp pink antilock brake valve 35 40 amp green antilock brake pump 36 30 amp pink headlamp/ washer control/ smart glass – if equipped 37 25 amp natural diesel fuel heater – if equipped caution! • when installing the ipm cover, it is important to ens...

  • Page 521

    Vehicle storage if you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery. • disengage the mini-fuse in the power distribution center labeled iod (ignition off-draw). • or disconnect the negative cable from the battery. • anytime you store your ...

  • Page 522

    Bulb number daytime running light (drl) 3157k front park/turn signal lamp 7444na front side marker lamp 194 front fog lamp h11ll center high mounted stop lamp (chmsl) led assembly (serviced at authorized dealer) rear tail/stop lamp led assembly (serviced at authorized dealer) rear turn lamp 7440na (...

  • Page 523

    Note: these are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog lamps 1. Access lamp through the lower fascia cutout. 2. Remove electrical connector from bulb. 3. Remove bulb from housing. C...

  • Page 524

    Fluid capacities u.S. Metric fuel (approximate) 13.6 gallons 51.5 liters engine oil with filter 2.0l and 2.4l engine (sae 5w-20, api certified) 4.5 quarts 4.26 liters cooling system * 2.0l and 2.4l engine (mopar® antifreeze/engine coolant 10 year/150,000 mile formula or equivalent) 7.2 quarts 6.8 li...

  • Page 525

    Fluids, lubricants and genuine parts engine component fluid, lubricant, or genuine part engine coolant we recommend you use mopar® antifreeze/coolant 10 year/ 150,000 mile formula oat (organic additive technology) or equivalent meeting the requirements of chrysler material standard ms-12106. Engine ...

  • Page 526

    Chassis component fluid, lubricant, or genuine part automatic transmission (cvt) – if equipped we recommend you use mopar® cvtf+4® continuously variable transmission fluid. Automatic transmission (six-speed) - if equipped we recommend you use sk energy atf sp-4 transmission fluid. Manual transmissio...

  • Page 527: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . .526 ▫ maintenance chart. . . . . . . . . . . . . . . . . . . . .528 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 528

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indi- cator message will illuminate. Th...

  • Page 529

    Severe duty all models change engine oil at 4000 miles (6,500 km) if the vehicle is operated in a dusty and off road environment. This type of vehicle use is considered severe duty once a month or before a long trip: • check engine oil level • check windshield washer fluid level • check the tire inf...

  • Page 530

    Maintenance chart refer to the maintenance schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 ...

  • Page 531

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 532

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 533

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 534

    Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • failure to properly inspect and mai...

  • Page 535: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . .535 ▫ prepare for the appointment. . . . . . . . . . . . .535 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . .535 ▫ be reasonable with requests . . . . ....

  • Page 536

    䡵 department of transportation uniform tire quality grades . . . . . . . .542 ▫ treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .542 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . . .542 ▫ temperature grades. . . . . . . . . . . . . . . . . . . .543 534 if you need consumer...

  • Page 537

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager....

  • Page 538

    Warranty service must be done by an authorized dealer. We strongly recommend that you take the vehicle to an authorized dealer. They know your vehicle the best, and are most concerned that you get prompt and high quality service. The manufacturer’s authorized dealer have the facilities, factory-trai...

  • Page 539

    Chrysler canada inc. Customer center p.O. Box 1621 windsor, ontario n9a 4h6 phone: (800) 465–2001 english / (800) 387–9983 french in mexico contact: av. Prolongacion paseo de la reforma, 1240 sante fe c.P. 05109 mexico, d. F. In mexico city: 5081-7568 outside mexico city: 1-800-505-1300 customer ass...

  • Page 540

    Service contract you may have purchased a service contract for a vehicle to help protect you from the high cost of unexpected repairs after the manufacturer’s new vehicle limited warranty expires. The manufacturer stands behind only the manufacturer’s service contracts. If you purchased a manufactur...

  • Page 541

    Warning! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the state of california to cause cancer and birth defects, or other reproductive harm. In addi- tion, certain fluids contained in vehicles and certain products of component wear con...

  • Page 542

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 543

    Service manuals these comprehensive service manuals provide the infor- mation that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintain- ing, servicing, and repairing chrysler group llc ve- hicles. A complete working knowledge of the vehicle, system, an...

  • Page 544

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 545

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 547: Index

    Index 10

  • Page 548

    Abs (anti-lock brake system) . . . . . . . . . . . . . . . .362 adding engine coolant (antifreeze) . . . . . . . . . . . .496 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .414 adding washer fluid . . . . . . . . . . . . . . . . . . . . . .490 additives, fuel . . . . . . . . . ...

  • Page 549

    Automatic transmission . . . . . . . . . . . . . . . . . . . .328 fluid and filter changes . . . . . . . . . . . . . . . . . .503 fluid level check . . . . . . . . . . . . . . . . . . . . . . .503 fluid type . . . . . . . . . . . . . . . . . . . . . . . . . . . .502 gear ranges . . . . . . . . . . ....

  • Page 550

    Cargo compartment . . . . . . . . . . . . . . . . . . . . . . .200 light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 luggage carrier . . . . . . . . . . . . . . . . . . . . . . . .208 cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 cargo load floor . ....

  • Page 551

    Coolant pressure cap (radiator cap) . . . . . . . . . . .497 cooling system. . . . . . . . . . . . . . . . . . . . . . . . . . .493 adding coolant (antifreeze) . . . . . . . . . . . . . . .496 coolant level . . . . . . . . . . . . . . . . . . . . . . . . . .494 disposal of used coolant . . . . . . ....

  • Page 552

    Electronic brake control system . . . . . . . . . . . . . . .365 anti-lock brake system . . . . . . . . . . . . . . . . . .365 brake assist system . . . . . . . . . . . . . . . . . . . . .366 electronic roll mitigation . . . . . . . . . . . . . . . . .367 traction control system . . . . . . . . . . ...

  • Page 553

    Filters air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .484 air conditioning . . . . . . . . . . . . . . . . . . . . . . .314 engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . .484 engine oil disposal . . . . . . . . . . . . . . . . . . . . .484 flashers . . . . . . ....

  • Page 554

    Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .410 tank capacity . . . . . . . . . . . . . . . . . . . . . . . . . .522 fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .414 fuel system caution . . . . . . . . . . . . . . . . . . . . . . .415 fuses . . . . . . ....

  • Page 555

    Hill descent control . . . . . . . . . . . . . . . . . . . . . . .228 hill start assist. . . . . . . . . . . . . . . . . . . . . . . . . . .369 hitches trailer towing . . . . . . . . . . . . . . . . . . . . . . . . .422 homelink® (garage door opener) . . . . . . . . . . . .179 hood release . . . . ....

  • Page 556

    Lane change and turn signals . . . . . . . . . . . . . . . .521 lane change assist . . . . . . . . . . . . . . . . . . . . . . . .169 lap/shoulder belts. . . . . . . . . . . . . . . . . . . . . . . . .43 latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 hood . . . . . . . . ...

  • Page 557

    Oil pressure . . . . . . . . . . . . . . . . . . . . . . . . . . .217 seat belt reminder . . . . . . . . . . . . . . . . . . . . . .218 security alarm (theft alarm) . . . . . . . . . . . . . . . .19 service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520 theft alarm (security alarm)...

  • Page 558

    Mini-trip computer . . . . . . . . . . . . . . . . . . . . . . .230 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 automatic dimming . . . . . . . . . . . . . . . . . . . . .109 electric powered . . . . . . . . . . . . . . . . . . . . . . . .110 exterior folding . . . . ....

  • Page 559

    Opener, garage door (homelink®) . . . . . . . . . . . .179 operating precautions . . . . . . . . . . . . . . . . . . . . . .477 operator manual (owner’s manual) . . . . . . . . . . . . .5 overheating, engine . . . . . . . . . . . . . . . . . . . . . . .222 owner’s manual (operator manual) . . . . . ...

  • Page 560

    Rear liftgate (sedan) . . . . . . . . . . . . . . . . . . . . . . .38 rear seat, folding . . . . . . . . . . . . . . . . . . . . . . . . .162 rearview mirrors . . . . . . . . . . . . . . . . . . . . . . . . .108 rear window defroster . . . . . . . . . . . . . . . . . . . . .207 rear window features ...

  • Page 561

    Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 adjustable shoulder belt . . . . . . . . . . . . . . . . . . .48 adjustable upper shoulder anchorage . . . . . . . . .48 and pregnant women . . . . . . . . . . . . . . . . . . . . .61 child restraint . . . . . . . . . . . ....

  • Page 562

    Snow tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .392 spare tire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .393 speed control (cruise control). . . . . . . . . . . . . . . .175 speedometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 starting . . ....

  • Page 563

    Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .398 changing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .440 compact spare . . . . . . . . . . . . . . . . . . . . . . . . .393 general information . . . . . . . . . . . . . . . . . . . . .387 high speed . . . . . . . ....

  • Page 564

    Trailer and tongue weight . . . . . . . . . . . . . . . . .424 wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .429 trailer towing guide. . . . . . . . . . . . . . . . . . . . . . .423 trailer weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .423 transaxle automatic . ...

  • Page 565

    Vehicle theft alarm (security alarm) . . . . . . . . . . . .18 voice recognition system (vr) . . . . . . . . . . . . . . . .144 warning lights (instrument cluster description) . . .216 warning, roll over . . . . . . . . . . . . . . . . . . . . . . . . .4 warnings and cautions. . . . . . . . . . . . ...

  • Page 566

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed prop- erly by trained personnel. The following must be obs...

  • Page 567

    Patriot chrysler group llc o w n e r ’ s m a n u a l 20 14 p a triot 14mk74-126-ac third edition printed in u.S.A. 2 0 1 4.