1. DL manuals
  2. Jeep
  3. Stroller
  4. Liberty
  5. Owner's Manual

Jeep Liberty Owner's Manual

Manual is about: Chrysler 2011

Summary of Liberty

  • Page 1

    Liberty chrysler group llc o w n e r ’ s m a n u a l 2 0 1 1 2 0 1 1 l ib e rt y 11kk74-126-ab second edition printed in u.S.A..

  • Page 2

    291680.Ps 11jk72-126-aa chrysler 1" gutter 05/14/2010 06:18:00 vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one o...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3 understanding the featu...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 5 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 7 䡵 vehicle ide...

  • Page 6

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and ...

  • Page 7

    Control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully. Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the unive...

  • Page 8

    6 introduction.

  • Page 9

    Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...

  • Page 10

    Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. 8 introduction.

  • Page 11: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 12 ▫ ignition key removal . . . . . . . . . . . . . . . . . . 12 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . 14 䡵 sentry key威 . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 12

    ▫ using the panic alarm . . . . . . . . . . . . . . . . . 24 ▫ programming additional transmitters . . . . . . 25 ▫ battery replacement . . . . . . . . . . . . . . . . . . . 25 ▫ general information . . . . . . . . . . . . . . . . . . . 26 䡵 remote starting system — if equipped . . . . . . . 27 ▫ ho...

  • Page 13

    ▫ energy management feature . . . . . . . . . . . . . 58 ▫ seat belts and pregnant women . . . . . . . . . . 58 ▫ seat belt extender . . . . . . . . . . . . . . . . . . . . . 58 ▫ supplemental restraint system (srs) — air bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 ▫ air bag depl...

  • Page 14

    A word about your keys you can insert the double-sided keys into the locks with either side up. The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dea...

  • Page 15

    Note: • for vehicles not equipped with the electronic vehicle information center (evic), features such as the power window switches, radio, power sunroof or sky slider 威 (if equipped), and power outlets will remain active for 45 seconds after the ignition switch is turned to the lock position. Openi...

  • Page 16

    Warning! • never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power win- dows, other controls, or move the vehicle...

  • Page 17

    The system uses ignition keys that have an embedded electronic chip (transponder) to prevent unauthorized vehicle operation. Therefore, only keys that are pro- grammed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if someone uses an i...

  • Page 18

    Replacement keys note: only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a sentry key 威 is programmed to a vehicle, it cannot be programmed to any other vehicle. Caution! Always remove the sentry keys 威 from the vehicle and lock all doors whe...

  • Page 19

    3. Insert the second valid key into the ignition switch. Turn the ignition switch to the on/run position within 15 seconds. After 10 seconds, a chime will sound. In addition, the vehicle security light will begin to flash. Turn the ignition switch to the lock position and remove the second key. 4. I...

  • Page 20

    Vehicle security alarm — if equipped the vehicle security alarm monitors the vehicle doors, liftgate, and liftgate flipper glass for unauthorized entry and ignition for unauthorized operation. While the ve- hicle security alarm is armed, interior switches for door locks and flipper glass are disable...

  • Page 21

    3. Close all doors. The vehicle security light in the instrument cluster will flash rapidly for about 16 seconds to signal that the vehicle security alarm is arming. During this period, opening any door or the liftgate will cancel the arming process. If the vehicle security alarm is set successfully...

  • Page 22

    Illuminated entry the courtesy lights will turn on when you use the remote keyless entry (rke) transmitter to unlock the doors or open any door. This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “mirrors” in “understanding the features of your vehicle” f...

  • Page 23

    To unlock the doors and liftgate press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illumi- nated entry system will also turn on. Remote key...

  • Page 24

    3. Test the feature from outside the vehicle by pressing the lock and unlock buttons on the rke transmitter. 4. Repeat these steps if you want to return this feature to its previous setting. Note: pressing the lock button on the rke transmit- ter while you are inside the vehicle will activate the se...

  • Page 25

    • for vehicles not equipped with the evic, perform the following steps: 1. Press the lock button on a programmed (i.E., func- tional) rke transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the panic button while still holding the lock button. 2. Release both buttons at th...

  • Page 26

    3. Test the feature from outside the vehicle by pressing the lock and unlock buttons on the rke transmitter. 4. Repeat these steps if you want to return this feature to its previous setting. Note: pressing the lock button on the rke transmit- ter while you are inside the vehicle will activate the se...

  • Page 27

    To turn the panic alarm feature on or off, press and hold the panic button on the rke transmitter for at least one second and release. When the panic alarm is on, the headlights and turn signal lights will flash, the horn will pulse on and off, and the illuminated entry system will turn on. The pani...

  • Page 28

    2. With the rke transmitter buttons facing down, use a flat blade tool to pry the two halves of the rke transmit- ter case apart. Make sure not to damage the seal during removal. 3. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterior...

  • Page 29

    Note: changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. If your rke transmitter fails to operate from a normal distance, check for these two conditions: 1. Weak battery in rke transmitter. The expected ...

  • Page 30

    Warning! • do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon mon- oxide (co) which is odorless and colorless. Car- bon monoxide is poisonous and can cause serious injury or death when inhaled. • keep remote keyless entry (rke) transmitters away from child...

  • Page 31

    To exit remote start mode and drive the vehicle before the end of the 15-minute cycle, press and release the unlock button on the rke transmitter to unlock the doors and disarm the vehicle security alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the on/run p...

  • Page 32

    Warning! • for personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • when leaving the vehicle, always remove the key from the ignition lock, and lock your vehicle. Unsupervised use of vehicle equipment may caus...

  • Page 33

    If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if ...

  • Page 34

    2. Within 15 seconds, cycle the ignition switch between lock and on/run and then back to lock four times ending up in the lock position (do not start the engine). 3. Within 30 seconds, press the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programmi...

  • Page 35

    Automatic unlock doors on exit programming the automatic unlock doors on exit feature can be enabled or disabled as follows: • for vehicles equipped with the electronic vehicle information center (evic), refer to “electronic vehicle information center (evic)/personal settings (customer-programmable ...

  • Page 36

    Opened by using the outside door handle even if the inside door lock is in the unlocked position. Note: • when the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. • after disengaging the child-pr...

  • Page 37

    Windows power windows the window controls on the driver’s door trim panel control all the door windows. There are single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition switch is in the on/run or acc posi...

  • Page 38

    To open the window part way, press the window switch to the first detent and release it when you want the window to stop. To stop the window from going all the way down during the auto-down operation, pull up on the switch briefly. For vehicles not equipped with the electronic vehicle information ce...

  • Page 39

    For vehicles equipped with the evic, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the lock position. Opening either front door will cancel this feature. The time is programmable. Refer to “electronic vehicle information center (evic)/person...

  • Page 40

    Window lockout button the window lockout button on the driver’s door trim panel allows you to disable the window control on the other doors. To disable the window control on the other doors, press and release the window lockout button (setting it in the down position). To enable the window controls,...

  • Page 41

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof or sky slider™ (if equipped) in certain open or partially open positions. This is a normal oc...

  • Page 42

    Warning! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your pas- sengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. Liftgate flipper glass the liftgate flipper glass is also unlocked when the liftgate is...

  • Page 43

    Warning! To avoid injury, stand back when opening. Glass may automatically rise. Note: if a malfunction to the liftgate latch should occur, an emergency liftgate latch release can be used to open the liftgate. The emergency liftgate latch release can be accessed through a snap-in cover located on th...

  • Page 44

    • front seat belts incorporate pretensioners that may enhance occupant protection by managing occupant energy during an impact event • all seat belt systems (except the driver’s and rear center) include automatic locking retractors (alrs), which lock the seat belt webbing into position by extending ...

  • Page 45

    Secured in the rear seat in child restraints or belt- positioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. If a chi...

  • Page 46

    Warning! (continued) • being too close to the steering wheel or instrument panel during advanced front air bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • supplemen...

  • Page 47

    Warning! • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In an accident, people riding in these areas are more likely to be seriously injured or killed. • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure ever...

  • Page 48

    Seat belt latch plates are located on the c-pillar for the outboard rear seating positions and next to your arm in the center rear seating position. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 3. When the ...

  • Page 49

    Warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you properly. In a sudden stop...

  • Page 50

    Tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in an accident. Warning! • a lap belt worn too high can increase the risk of injury in an accident. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Alway...

  • Page 51

    Warning! A frayed or torn belt could rip apart in an accident and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced a...

  • Page 52

    As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. Lap/shoulder belt untwisting procedure use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as po...

  • Page 53

    Seat belt lock out the center rear seat belt system has a lock out feature that will not allow you to extract the center webbing unless the rear seat upper latch is engaged. Seat belts in passenger seating positions the seat belts in the passenger seating positions are equipped with automatic lockin...

  • Page 54

    Anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in the rear seat. How to engage the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder por...

  • Page 55

    How the active head restraints (ahr) work the occupant restraint controller (orc) determines whether the severity, or type of rear impact will require the active head restraints (ahr) to deploy. If a rear impact requires deployment, both the driver and front passenger seat ahrs will be deployed. Whe...

  • Page 56

    Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident. Note: for more information on properly adjusting and positi...

  • Page 57

    1 — downward movement 2 — rearward movement 3 — final downward movement to engage locking mechanism 2 things to know before starting your vehicle 55.

  • Page 58

    4. The ahr front soft foam and trim half should lock into the back decorative plastic half. Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an autho...

  • Page 59

    Beltalert 威 will chime as a single notification and illumi- nate the seat belt reminder light, then will proceed to the 96 second reminder sequence. The front passenger seat beltalert 威 is not active when the front passenger seat is unoccupied. Beltalert 威 may be triggered when an animal or heavy ob...

  • Page 60

    Energy management feature this vehicle has a safety belt system with an energy management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety belt system has a retractor assembly that is designed to release webbing in a con...

  • Page 61

    Warning! Using a seat belt extender when not needed can increase the risk of injury in an accident. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Supplemental restraint system (srs)...

  • Page 62

    This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the advanced front air bags based upon seat position. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the d...

  • Page 63

    Air bag system components your vehicle may be equipped with the following air bag system components: • occupant restraint controller (orc) • air bag warning light • steering wheel and column • instrument panel • knee impact bolster • driver advanced front air bag • passenger advanced front air bag •...

  • Page 64

    Note: the passenger advanced front air bag may not deploy, even when the driver advanced front air bag has, if the occupant classification system (refer to ⬙oc- cupant classification system ⬙) has determined the pas- senger seat is empty or is occupied by someone that is classified in the ⬙child⬙ si...

  • Page 65

    Warning! (continued) • do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for instal- lation on the vehicle roof. Do not drill into the roof of the vehicle for any...

  • Page 66

    • do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. • if your vehicle is equipped with sabic air bags, do not have any accessory items installed which will ...

  • Page 67

    Advanced front air bags are designed to provide addi- tional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision. Advanced front air bags are not expected to reduce the risk of injury in rear, side, or rollover collisions. The adva...

  • Page 68

    Also, the orc turns on the “air bag warning light” for four to eight seconds for a self-check when the ignition is first turned to on/run. After the self-check, the “air bag warning light” will turn off. If the orc detects a malfunction in any part of the system, it turns on the “air bag warning lig...

  • Page 69

    • occupant classification module (ocm) the ocm is located beneath the front passenger seat. The ocm classifies the occupant into categories based on the measurements made by the seat weight sensors. The ocm communicates with the orc. The orc uses the occupant category to determine whether the passen...

  • Page 70

    The pad indicator light should not be illuminated when an adult passenger is properly seated in the front passen- ger seat. In this case, the passenger advanced front air bag is ready to be inflated if a collision requires an air bag deployment. For all other occupants, the pad indicator light will ...

  • Page 71

    Drivers and adult passengers should verify that the pad indicator light is not illuminated when an adult is riding in the front passenger seat. If an adult occupant’s weight is transferred to another part of the vehicle (like the door or instrument panel), the weight sensors in the seat may not prop...

  • Page 72

    Driver and passenger advanced front air bag inflator units the driver and passenger advanced front air bag inflator units are located in the center of the steering wheel and on the right side of the instrument panel. When the orc detects a collision requiring the ad- vanced front air bags, it signal...

  • Page 73

    And damage by themselves are not good indicators of whether or not an air bag should have deployed. A quantity of non-toxic gas is generated to inflate the side curtain air bag. The inflating side curtain air bag pushes the outside edge of the headliner out of the way and covers the window. The air ...

  • Page 74

    The following requirements must be strictly adhered to: • do not modify the front passenger seat assembly or components in any way. • do not use prior or future model year seat covers not designated for the specific model being repaired. Al- ways use the correct seat cover specified for the vehicle....

  • Page 75

    Enhanced accident response system in the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the orc will determine whether to have the enhanced accident response system perform the follow- ing...

  • Page 76

    Bag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow...

  • Page 77

    Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat includ- ing your trim cover and cushion...

  • Page 78

    Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of t...

  • Page 79

    In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the edr. Child restraints everyone in your vehicle needs to be buckled up all the time, including babies and children. Ev...

  • Page 80

    Infants and child restraints • safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and “convertible” child seats. • the infant carr...

  • Page 81

    The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly. If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-po...

  • Page 82

    Warning! • improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • a rearward- facing infant restraint sho...

  • Page 83

    Warning! When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Do not leave it loose in the vehicle. In a sudden stop or accident, it could strike the occupants or seatbacks and cause serious personal injury. Lower anchors and tether for ...

  • Page 84

    If you are installing latch-compatible child restraints in adjacent rear seating positions, you can use the latch anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position. If your child restraints are not latch- compatible, you can...

  • Page 85

    In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusti...

  • Page 86

    Downward into the seat, removing slack in the straps according to the child restraint manufacturer’s instruc- tions. Warning! Improper installation of a child restraint to the latch anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the...

  • Page 87

    Through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a “click.” next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. As the belt retracts, you will hear a ratcheting sound. This indicates the...

  • Page 88

    • route the tether strap to provide the most direct path for the strap between the anchor and the child seat, preferably between the head restraint posts under- neath the head restraint. Warning! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the chil...

  • Page 89

    Engine break-in recommendations a long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While crui...

  • Page 90

    Warning! (continued) • it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • do not allow people to ride in any area of your vehicle that is not equipped with seats and se...

  • Page 91

    If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control blower switch is set at high speed. Do not use the recirculation mode. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exha...

  • Page 92

    Defroster check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor mat safety information always use floor mats designed ...

  • Page 93

    Warning! (continued) • always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Ob- jects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • if required, mounting posts must be properly installed, if not equipped...

  • Page 95: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ▫ inside day/night mirror . . . . . . . . . . . . . . . . 99 ▫ automatic dimming mirror — if equipped . . 100 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . 101 ▫...

  • Page 96

    䡵 voice command — if equipped . . . . . . . . . . . 133 ▫ voice command system operation . . . . . . . . 133 ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . 134 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . 138 䡵 seats . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 97

    ▫ headlights with wipers (available with automatic headlights only) . . . . . . . . . . . . 160 ▫ headlight time delay — if equipped . . . . . . 160 ▫ daytime running lights — if equipped . . . . 161 ▫ lights-on reminder . . . . . . . . . . . . . . . . . . 161 ▫ fog lights — if equipped . . . . . . ...

  • Page 98

    ▫ to resume speed . . . . . . . . . . . . . . . . . . . . 173 ▫ to vary the speed setting . . . . . . . . . . . . . . 173 ▫ to accelerate for passing . . . . . . . . . . . . . . 174 䡵 parksense威 rear park assist — if equipped . . . 175 ▫ parksense威 sensors . . . . . . . . . . . . . . . . . . . 175 ▫...

  • Page 99

    ▫ closing sunroof — manual mode . . . . . . . . 191 ▫ pinch protect feature . . . . . . . . . . . . . . . . . 191 ▫ pinch protect override . . . . . . . . . . . . . . . . 192 ▫ venting sunroof — express . . . . . . . . . . . . . 192 ▫ sunshade operation . . . . . . . . . . . . . . . . . . 192 ▫ wind...

  • Page 100

    䡵 cargo area features . . . . . . . . . . . . . . . . . . . 204 ▫ cargo load floor . . . . . . . . . . . . . . . . . . . . 204 䡵 rear window features . . . . . . . . . . . . . . . . . . 210 ▫ rear window wiper/washer . . . . . . . . . . . . 210 ▫ rear window defroster . . . . . . . . . . . . . . . ....

  • Page 101

    Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicl...

  • Page 102

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activa...

  • Page 103

    Outside mirrors to receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. Note: the passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next...

  • Page 104

    Models with express window feature press and release the mirror select button marked l (left) or r (right) and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selection will time out after 30 seconds of inactivity to guard against accidentally ...

  • Page 105

    Sun visor “slide-on-rod” feature — if equipped the sun visor “slide-on-rod” feature allows for addi- tional flexibility in positioning the sun visor to block out the sun. 1. Fold down the sun visor. 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirror to ...

  • Page 106

    For uconnect™ customer support, visit the following websites: • www.Chrysler.Com/uconnect • www.Dodge.Com/uconnect • www.Jeep.Com/uconnect • or call 1–877–855–8400 uconnect™ phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you ...

  • Page 107

    Uconnect™ phone button the radio or steering wheel controls (if equipped) will contain the two control buttons (uconnect™ phone button and voice command button) that will enable you to access the system. When you press the button you will hear the word uconnect™ followed by a beep. The beep is your ...

  • Page 108

    • for certain operations, compound commands can be used. For example, instead of saying “setup” and then “pair a device”, the following compound command can be said: “pair a bluetooth 威 device”. • for each feature explanation in this section, only the compound form of the voice command is given. You...

  • Page 109

    To complete the pairing process, you will need to refer- ence your mobile phone owner’s manual. The uconnect™ website may also provide detailed instruc- tions for pairing. The following are general phone to uconnect™ phone pairing instructions: • press the button to begin. • after the “ready” prompt...

  • Page 110

    Dial by saying a number • press the button to begin. • after the “ready” prompt and the following beep, say “dial”. • the system will prompt you to say the number you want to call. • for example, you can say “234-567-8901”. • the uconnect™ phone will confirm the phone number and then dial. The numbe...

  • Page 111

    • after the “ready” prompt and the following beep, say “phonebook new entry”. • when prompted, say the name of the new entry. Use of long names helps the voice command and it is recom- mended. For example, say “robert smith” or “robert” instead of “bob”. • when prompted, enter the number designation...

  • Page 112

    • automatic download and update, if supported, begins as soon as the bluetooth 威 wireless phone connection is made to the uconnect™ phone, for example, after you start the vehicle. • a maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the uconnect™...

  • Page 113

    • next, choose the number designation (home, work, mobile, or other) that you wish to edit. • when prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in ...

  • Page 114

    • note that only the phonebook entry in the current language is deleted. • automatic downloaded phonebook entries cannot be deleted or edited. Delete/erase “all” uconnect™ phonebook entries • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook erase all”. • t...

  • Page 115

    • the selected number will be dialed. Phone call features the following features can be accessed through the uconnect™ phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the ucon...

  • Page 116

    In progress. To go back to the first call, refer to “toggling between calls” in this section. To combine two calls, refer to “conference call” in this section. Place/retrieve a call from hold to put a call on hold, press the button until you hear a single beep. This indicates that the call is on hol...

  • Page 117

    Call termination to end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is ...

  • Page 118

    Uconnect™ phone features language selection to change the language that the uconnect™ phone is using: • press the button to begin. • after the “ready” prompt and the following beep, say the name of the language you wish to switch to english, espanol, or francais. • continue to follow the system prom...

  • Page 119

    Canada and 060 for mexico). The number dialed may not be applicable with the available mobile service and area. • if supported, this number may be programmable on some systems. To do this, press the button and say “setup”, followed by “emergency”. • the uconnect™ phone does slightly lower your chanc...

  • Page 120

    Paging to learn how to page, refer to “working with automated systems”. Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the uconnect™ phone. Voice mail calling to learn how to access your voice mail, refer to “working with automate...

  • Page 121

    The uconnect™ phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. Note: • you may not hear all of the tones due to mobile phone network configurations. This is normal. • some paging and voice mail systems have system time out settings tha...

  • Page 122

    Dialing using the mobile phone keypad you can dial a phone number with your mobile phone keypad and still use the uconnect™ phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired bluetooth 威 mobil...

  • Page 123

    From your uconnect™ phone paired mobile phone to the uconnect™ phone or vice versa, press the button and say “transfer call”. Connect or disconnect link between the uconnect™ phone and mobile phone your mobile phone can be paired with many different electronic devices, but can only be actively “conn...

  • Page 124

    • the selected phone will be used for the next phone call. If the selected phone is not available, the uconnect™ phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete uconnect™ phone paired mobile phones • press the button to ...

  • Page 125

    You can either press the uconnect™ phone button to restore the factory setting or repeat the words and phrases when prompted by the uconnect™ phone. For best results, the voice training session should be com- pleted when the vehicle is parked with the engine running, all windows closed, and the blow...

  • Page 126

    • fully closed windows, • dry weather condition. • even though the system is designed for users speaking in north american english, french, and spanish ac- cents, the system may not always work for some. • when navigating through an automated system such as voice mail, or when sending a page, at the...

  • Page 127

    • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the uconnect™ phone. • echo at the phone far end can sometimes be reduced by lowering the in-veh...

  • Page 128

    Send messages: you can send messages using uconnect™ phone. To send a new message: • press the button. • after the “ready” prompt and the following beep, say “sms send” or “send message.” • you can either say the message you wish to send or say “list messages.” there are 20 preset messages. To send ...

  • Page 129

    16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me turn sms incoming announcement on/off turning the sms incoming announcement off will stop the system from announcing the new incoming mes- sages. • press the button. • after the “ready” prompt and th...

  • Page 130

    128 understanding the features of your vehicle.

  • Page 131

    3 understanding the features of your vehicle 129.

  • Page 132

    130 understanding the features of your vehicle.

  • Page 133

    Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 3 understa...

  • Page 134

    Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...

  • Page 135

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 136

    If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system is speaking is known as “barging in.” the system will be interrupted, and after the beep, you can add or chan...

  • Page 137

    2. Say a command (e.G., “help”). 3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice command system is speaking. Please note the volume setting for voice command is different than the audio system. Main menu start a dialogue by pressing the voice command ...

  • Page 138

    • “menu radio” (to switch to the radio menu) • “main menu” (to switch to the main menu) satellite radio to switch to satellite radio mode, say “sat” or “satellite radio”. In this mode, you may say the following com- mands: • “channel number” (to change the channel by its spoken number) • “next chann...

  • Page 139

    − “continue” (to continue recording) − “delete” (to delete the recording) • “play memos” (to play previously recorded memos) — during the playback you may press the voice command button to stop playing memos. You proceed by saying one of the following commands: − “repeat” (to repeat a memo) − “next”...

  • Page 140

    Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect™ voice “voice training” feature may be used. 1. Press the voice command button, say “system setup” and once you are in that menu then say “voice training.” this will train your...

  • Page 141

    Driver’s power seat — if equipped the power seat switch is located on the outboard side of the seat near the floor. Use this switch to move the seat up or down, forward or rearward or to tilt the seat. Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push th...

  • Page 142

    Passenger power seat — if equipped vehicle’s equipped with passenger power seats can only be adjusted forward and backward. Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or deat...

  • Page 143

    You can choose from high, low or off heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for high, one for low and none for off. Press the switch once to select high-level heating. Press the switch a second time to select low-l...

  • Page 144

    Manual front seat adjustments for models equipped with manual seats, the driver and passenger seats can be adjusted forward or rearward by using a bar by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the ba...

  • Page 145

    Front seat — manual recline to recline the seatback, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the lever once the seatback is in the upright p...

  • Page 146

    Manual lumbar support — if equipped for models equipped with manual lumbar the support lever is located on the inboard side of the seat. Turn the lever downward to increase and upward to decrease the desired amount of lumbar support. Fold-flat front passenger seat — if equipped this feature allows t...

  • Page 147

    Head restraints head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. Warning! The head restraints for all occupants must be ...

  • Page 148

    To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the adjust- ment button, located at the base of the head restraint, and push downward on the head restraint. For comfort the active head restraints can be tilted forward and backward. To tilt the head ...

  • Page 149

    Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head re...

  • Page 150

    Warning! (continued) • active head restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the ac- tive head restraint ensure that all cargo is se- cured, as loose cargo could contact the active head restraint during sudden st...

  • Page 151

    • refer to “occupant restraints” in “things to know before starting your vehicle” for information on tether routing. Warning! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should be check...

  • Page 152

    2. Pull the release strap (toward the front of the vehicle). 3. Fold the rear seat completely forward. 4. If desired, push down on the seatback to lock it in the folded position. To raise the rear seat note: if interference from the cargo area prevents the seatback from fully locking, you will have ...

  • Page 153

    Recliner adjustment the rear seatback also reclines for additional passenger comfort. Pull the release strap while sitting in the rear seat to recline the seatback. Warning! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you c...

  • Page 154

    Recall either of the two pre-programmed memory profiles by pressing the appropriate side of the switch. Programming the memory feature to create a new memory profile, perform the following: note: saving a new memory profile will erase an existing profile from memory. 1. Turn the ignition on. 2. Adju...

  • Page 155

    3. Press and release the set button on the memory switch, then press the side of the rocker switch labeled (2) within five seconds. The evic, if equipped, will display which memory position is being set. Note: • for vehicles equipped with an automatic transmission, memory profiles can be set without...

  • Page 156

    Note: your rke transmitters can be unlinked to the memory setting by pressing the set button followed by the unlock button on the rke transmitter in step 4 above. Memory position recall note: • for vehicles equipped with an automatic transmission, the vehicle must be in park to recall memory posi- t...

  • Page 157

    The distance the driver seat moves depends on where you have the driver seat positioned when you remove the key from the ignition switch. • when you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearward if the driver’s seat position is greater than or equal...

  • Page 158

    To open and close the hood two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Outside of the vehicle, locate the safety latch lever between the grille and hood opening (left of center when facing hood). Push the safet...

  • Page 159

    Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood. Caution! To prevent possible damage: • before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • lower the hood to a...

  • Page 160

    Lights multifunction lever the multifunction lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instru- ment panel light dimming, interior lights and fog lights (if equipped). Headlights and parking lig...

  • Page 161

    Automatic headlights — if equipped this system automatically turns the headlights on or off according to ambient light levels. To turn the system on, turn the end of the multifunction lever to the auto position (third detent). When the system is on, the headlight time delay feature is also on. This ...

  • Page 162

    Headlights with wipers (available with automatic headlights only) when this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the auto position. In addition, the headlights will turn off when the wipers are ...

  • Page 163

    Daytime running lights — if equipped the headlights will turn on as daytime running lights (drl) and operate at lower intensity whenever the ignition is on, the engine is running, the headlight switch is off, the parking brake is released and the shift lever is in any position except park. Lights-on...

  • Page 164

    Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside l...

  • Page 165

    Note: if the multifunction lever is held in the flash-to- pass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds before activating the flash-to-pass function again. Instrument panel dimmer rotate the center portion of the lever to the extreme bottom pos...

  • Page 166

    Unlock button on the remote keyless entry (rke) transmitter is pressed, or when the dimmer control is turned completely upward to the second detent. Cargo light the cargo light is mounted in the headliner above the rear cargo area. This light will turn on when you open the liftgate or any door, or i...

  • Page 167

    Windshield wiper operation rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper opera- tion. Rotate the end of the lever upward to the third detent past the intermittent settings for high-speed wiper opera- tion. Note: the wipers will automatical...

  • Page 168

    Caution! (continued) • always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur. Intermittent wiper system use th...

  • Page 169

    There are five delay settings, which allow you to regulate the wipe interval from a minimum of one cycle every second to a maximum of approximately 36 seconds between cycles or from a minimum of one cycle every second to a maximum of approximately 18 seconds between cycles at vehicle speeds greater ...

  • Page 170

    Mist feature push downward on the windshield wiper/washer con- trol lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle. The wipers will continue to operate until you release the lever. Rain sensing wipers — if equipped this feature senses moist...

  • Page 171

    Note: • the rain-sensing feature will not operate when the wiper speed is in the low or high position. • the rain-sensing feature may not function properly when ice or dried salt water is present on the wind- shield. • use of rain-x威 or products containing wax or silicone may reduce rain sensor perf...

  • Page 172

    • remote start wipe inhibit (vehicles equipped with remote start system) — the rain-sensing feature will not operate when the vehicle is in remote start mode. This feature will return to normal operation once remote start mode is exited. Refer to “remote start system” in “things to know before start...

  • Page 173

    To unlock the steering column, push the control handle downward. To tilt the steering column, move the steering wheel upward or downward as desired. To lock the steering column in position, pull the control handle upward until it is fully engaged. Warning! Do not adjust the steering column while dri...

  • Page 174

    The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic ...

  • Page 175

    To set a desired speed turn the electronic speed control on. When the vehicle has reached the desired speed, press the set (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. Note: the vehicle should be traveling at a steady speed and on level ground b...

  • Page 176

    To decrease speed while the electronic speed control is set, push the set (-) button. If the button is continually held in the set (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be e...

  • Page 177

    Parksense 姞 rear park assist — if equipped the parksense 威 rear park assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.G. During a parking maneuver. Refer to parksense 威 system usage precautions for limitations of...

  • Page 178

    The parksense 威 warning display is located in the instru- ment cluster’s evic display. It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. Parksense 姞 display when the vehicle is in reverse, the warning display will turn on ...

  • Page 179

    The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the evic display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. Park assist off slow tone 3 understandin...

  • Page 180

    The vehicle is close to the obstacle when the evic display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: fast tone continuous tone 178 understanding the features of your vehicle.

  • Page 181

    Warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) less than 12 in (30 cm) audible alert chime none single 1/2 second tone slow fast continuous display message park assist on warning object detected warning object detected ...

  • Page 182

    Enabling and disabling parksense 姞 parksense 威 can be enabled and disabled with a switch located in the switch bank of the instrument panel or through the customer-programmable features section of the evic. The available choices are: off, sound only, or sound and display. Refer to “electronic vehicl...

  • Page 183

    Cleaning the parksense 姞 system clean the parksense 威 sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could dam- age the sensors. Parksense 姞 system usage precautions note: • ensure that the rear bumper is free o...

  • Page 184

    Object as a sensor problem, causing the “service park assist system” message to be displayed in the evic. Caution! • parksense威 is only a parking aid and it is unable to recognize every obstacle, including small ob- stacles. Parking curbs might be temporarily de- tected or not detected at all. Obsta...

  • Page 185

    Warning! (continued) • before using the parksense威 rear park assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles becaus...

  • Page 186

    Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Warning! • your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this tran...

  • Page 187

    Your vehicle should be parked outside of the garage when programming. 1. Turn the ignition switch to the on/run position. 2. Hold the battery side of the handheld transmitter away from the homelink 威 button you wish to program. Place the handheld transmitter 1–3 in (3-8 cm) away from the homelink 威 ...

  • Page 188

    If the indicator light blinks rapidly for two seconds, and then turns to a constant light, continue with program- ming for a rolling code. 5. Programming a rolling code system at the garage door opener motor (in the garage), locate the “learn” or “training” button. This can usually be found where th...

  • Page 189

    7. Return to the vehicle and press the programmed homelink 威 button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for two seconds) to complete the training. If ...

  • Page 190

    Then proceed with step 4 under “programming homelink 威” earlier in this section. Using homelink 姞 to operate, press and release the programmed homelink 威 button. Activation will now occur for the trained device (i.E., garage door opener, gate operator, security system, entry door lock, home/office l...

  • Page 191

    • press the learn button on the garage door opener to complete the training for a rolling code. • did you unplug the device for training, and remember to plug it back in? If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the internet at www.Homelink.Com for...

  • Page 192

    Power sunroof — if equipped the power sunroof switch is located between the sun visors on the overhead console. Warning! • never leave unattended children in a vehicle with the key in the ignition switch. Occupants, particu- larly unattended children, can become entrapped by the power sunroof while ...

  • Page 193

    Opening sunroof — express press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automati- cally. This is called “express open”. During express open operation, any movement of the sunroof switch ...

  • Page 194

    Pinch protect override if a known obstruction (ice, debris, etc.) prevents closing and moves the sunroof in the opposite direction, press the switch forward and hold. This allows the sunroof to move towards the closed position. Note: pinch protection is disabled while the switch is pressed. Venting ...

  • Page 195

    Ignition off operation for vehicles not equipped with the electronic vehicle information center (evic), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the lock position. Opening either front door will cancel this feature. For vehicles equipped with ...

  • Page 196

    Caution! (continued) • opening the sky slider™ when damp, wet, or dirty can cause stains, mildew, and damage to the soft-top material and the inside of your vehicle. Make sure the sky slider™ is dry before opening. • always close the sky slider™ when leaving your vehicle, damage to the vehicle inter...

  • Page 197

    Warning! (continued) • if potential danger exists while opening or closing the sky slider™ in automatic mode, press and release the switch immediately to interrupt the operation. • if potential danger exists while opening or closing the sky slider™ in operator mode, release the switch immediately to...

  • Page 198

    Opening the sky slider™ using automatic mode press the switch rearward and release it within one-half second and the sky slider™ will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and release it within one-half second and the sky slider™ will ope...

  • Page 199

    Using operator mode if the sky slider™ is open from the front, press the switch forward and hold it, the sky slider™ will move forward. Release the switch to stop the sky slider™ travel at any point. If the sky slider™ is open from the rear, press the switch rearward and hold it and the sky slider™ ...

  • Page 200

    Ears. Your vehicle may exhibit wind buffeting with the windows down, or the sky slider™ in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buf...

  • Page 201

    Caution! • do not exceed the maximum power of 160 watts (13 amps) at 12 volts. If the 160 watt (13 amp) power rating is exceeded the fuse protecting the system will need to be replaced. • power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this...

  • Page 202

    Warning! (continued) • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock and failure. Caution! •...

  • Page 203

    Cupholders there are two cupholders for the front seat passengers, located in the center console. The rear passengers have cupholders at the rear of the center console. Front cupholders rear cupholders 3 understanding the features of your vehicle 201.

  • Page 204

    Storage glove box storage compartment the glove box storage compartment is located on the right side of the instrument panel. Pull outward on the latch to open the storage compartment. Front storage compartment the front storage compartment (located on the left side of the instrument panel) can hold...

  • Page 205

    Console storage compartment to open, press the latch and lift the cover. The center console has a removable storage tray which can hold cell phones, pdas, and other small items. Center console removable storage tray 3 understanding the features of your vehicle 203.

  • Page 206

    Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injur...

  • Page 207

    2. Pull the loops upward and twist them one-quarter turn so that they are parallel to the slots in the storage bin cover. 3. Lift the cover upward over the loops. 4. Turn over the cover and reinstall it. Note: you can install the cover with either side facing upward. 5. With the cover seated in the ...

  • Page 208

    Cargo tie-down hooks and loops the tie-downs located on cargo area floor should be used to secure loads safely when the vehicle is moving. Cargo tie-down loops are located on the trim panels. Cargo tie-down hooks cargo tie-down loops 206 understanding the features of your vehicle.

  • Page 209

    Warning! • cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or accident, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • to help protect against personal in...

  • Page 210

    Warning! (continued) • do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be- come a dangerous projectile in a sudden stop or accident. Retractable cargo area cover — if equipped note: the purpose of this cover is for privacy, not to secure loads. It wi...

  • Page 211

    Then, insert the spring-loaded post on the opposite end of the cover housing into the attachment point on the opposite side of the vehicle. Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) ...

  • Page 212

    Warning! In a collision, a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. D...

  • Page 213

    Rotate the switch upward past the first detent to activate the rear washer. The washer pump will continue to operate as long as the switch is held (for a maximum of 10 seconds). Upon release, the wiper will cycle two times before returning to the set position. If the rear wiper is operating when the...

  • Page 214

    Caution! (continued) • do not use scrapers, sharp instruments, or abra- sive window cleaners on the interior surface of the window. • keep all objects a safe distance from the window. Roof luggage rack — if equipped note: roof rack and crossbars cannot be used on vehicles equipped with skyslider 威. ...

  • Page 215

    Caution! • to avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as pos- sible and secure the load appropriately. • long loads, which extend over the windshield, such as wood panels or surfboards, should be secured to...

  • Page 217: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 218 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 219 䡵 instrument cluster descriptions . . . . . . . . . . . 220 䡵 electronic vehicle information center (evic) — if equipped . . . ....

  • Page 218

    ▫ list button (disc mode for mp3/wma play) . . . . . . . . . 261 ▫ info button (disc mode for mp3/wma play) . . . . . . . . . 261 ▫ uconnect™ multimedia (satellite radio) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 264 䡵 media center 730n/430/430n (rhr/rer/ rbz/rhb) cd/dvd/hdd/...

  • Page 219

    䡵 steering wheel audio controls . . . . . . . . . . . . 293 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . 294 ▫ cd player . . . . . . . . . . . . . . . . . . . . . . . . . 294 䡵 cd/dvd disc maintenance . . . . . . . . . . . . . . 295 䡵 radio operation and mobile phones . . . . . . . 29...

  • Page 220

    Instrument panel features 1 — air outlet 4 — radio 7 — power outlet 2 — instrument cluster 5 — glove compartment 8 — lower switch bank 3 — storage tray 6 — climate control 9 — storage bin (if equipped) 218 understanding your instrument panel.

  • Page 221

    Instrument cluster 4 understanding your instrument panel 219.

  • Page 222

    Instrument cluster descriptions 1. Fuel gauge the fuel gauge shows level of fuel in tank when ignition switch is in the on/run position. 2. Fuel door reminder this symbol indicates the side of the vehicle where the fuel cap is located. 3. Low fuel light this indicator lights when the fuel level drop...

  • Page 223

    Please note that the tpms is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped wi...

  • Page 224

    5. Electronic throttle control (etc) light this light informs you of a problem with the electronic throttle control (etc) system. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed...

  • Page 225

    Caution! Prolonged driving with the mil on could cause damage to the engine control system. It also could affect fuel economy and drivability. If the mil is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Warning! A malfunctioning catalytic ...

  • Page 226

    If the vehicle electronics sense that the vehicle is driven more than 1 mile (1.6 km) with either turn signal on, a continuous chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb. 11. Electronic stability contro...

  • Page 227

    The charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain service immediately. See an autho- rized dealer. If jump starting is required, refer to “jump starting procedures” in “what to do in emergencies”. 13. Oil pressure warning light...

  • Page 228

    Green area, you are driving the vehicle in a fuel efficient manner. Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage. 16. 4wd low indicator — if equipped this light alerts the driver that the vehicle is in the 4wd low mode. In this mode, the front drivesha...

  • Page 229

    21. Serv (service) 4wd indicator light — if equipped the “serv 4wd indicator light” will turn on when the ignition key is turned to the on/ run position and it will stay on for two seconds. If the light stays on or turns on during driving, it means that the 4wd system is not functioning properly and...

  • Page 230

    Caution! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “h” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “h” and you hear cont...

  • Page 231

    Caution! Continuous driving with the transmission tempera- ture warning light illuminated will eventually cause severe transmission damage or transmission failure. Warning! If the transmission temperature warning light is illuminated and you continue operating the vehicle, in some circumstances you ...

  • Page 232

    26. 4wd indicator — vehicles equipped with selec-trac 威 ii this light alerts the driver that the vehicle is in the full-time four-wheel drive auto mode. In this mode, the system operates with a normal torque split of 42% front axle and 58% rear axle. It can redirect up to 100% of torque to the front...

  • Page 233

    On vehicles equipped with a premium instrument clus- ter, this display shows the electronic vehicle information center (evic) messages when the appropriate conditions exist. Refer to electronic vehicle information center (evic) for further information. Eco / eco-on (fuel saver indicator) — if equipp...

  • Page 234

    Change oil message (base and mid line clusters only) your vehicle is equipped with an engine oil change indicator system. The “change oil” message will flash in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change int...

  • Page 235

    The driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the seat belt warning light will flash or remain on continuously. Refer to “occupant restraints” in “things to know before starting your vehicle” for further info...

  • Page 236

    If brake failure is indicated, immediate repair is neces- sary. Warning! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. Vehicles equipped ...

  • Page 237

    33. Airbag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to on/run. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Re...

  • Page 238

    This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The evic consists of the following: • system status • vehicle information warning message displays • tire pressure monitor system (if equipped) • personal sett...

  • Page 239

    Menu button press and release the menu button and the mode displayed will change between trip functions, uconnect™ gps (if equipped), sys- tem status, and personal settings. Down button press and release the down button to scroll downward through the main menus and sub- menus. Function select button...

  • Page 240

    • memory #1/#2 profile set • memory #1/#2 profile recall • memory system disabled – vehicle not in park (with a single chime) — automatic transmission • memory system disabled – vehicle in motion (with a single chime) — manual transmission • memory system disabled – seat belt buckled (with a single ...

  • Page 241

    • right rear low pressure (with a single chime). Refer to “tire pressure monitoring system” in “starting and operating”. • check tpm system (with a single chime). Refer to “tire pressure monitoring system” in “starting and operating”. • check gascap (refer to “adding fuel” in “starting and operating...

  • Page 242

    Note: if the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Trip functions press and until one of the following trip functions displays in the evic: • average fuel economy • distance to empty • elapsed tim...

  • Page 243

    Note: significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the dte displayed value. When the dte value is less than 30 miles (48 km) estimated driving distance, the dte display will change to a text display of ⬙low fue...

  • Page 244

    Be driven several minutes before the updated tempera- ture is displayed. Engine temperature can also affect the displayed temperature; therefore, temperature readings are not updated when the vehicle is not moving. Eco (fuel saver mode) — if equipped the eco message will display below the outside te...

  • Page 245

    3. Press the scroll button until “calibrate compass” displays in the evic. 4. Press and release the function select button to start the calibration. The “cal” indicator will display in the evic. 5. Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the...

  • Page 246

    2. Press the menu button until the personal settings (customer-programmable features) menu displays in the evic. 3. Press the scroll button until “compass variance” displays in the evic. 4. Press and release the function select button until the proper variance zone is selected according to the map. ...

  • Page 247

    Neutral position and the driver’s door is opened. To make your selection, press and release the function select button until “on” or “off” appears. Remote key unlock when driver door 1st press is selected, only the driver’s door will unlock on the first press of the remote keyless entry (rke) transm...

  • Page 248

    Automatically move seat back on exit — if equipped this feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the function select button until “on” or “off” appears. Note: the seat will return to...

  • Page 249

    Turn headlights on with remote key unlock when this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the rke transmitter. To make your selec- tion, press and release the function select button until “off,” “30 sec.,” “60 sec.,” or ...

  • Page 250

    Hill start assist (hsa) — if equipped when on is selected, the hsa system is active. Refer to “electronic brake control system” in “starting and operating” for system function and operating informa- tion. To make your selection, press and release the function select button until “on” or “off” appear...

  • Page 251

    Operating instructions - radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Press the on/volume control knob a second time to turn off the radio. Electronic volume con...

  • Page 252

    If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with uconnect phone” message will display on the radio screen. Phone button uconnect™ phone — if equipped press this button to operate the uconnect™ phone feature (if equipped). Refer to “uconnect™...

  • Page 253

    Info button press the info button for an rds station (one with call letters displayed). The radio will return a radio text message broadcast from an fm station (fm mode only). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the directi...

  • Page 254

    Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently broadcast music type inf...

  • Page 255

    Program type 16-digit character display top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in the fm mode. If a prese...

  • Page 256

    • angle – repeatedly pressing select will change the viewing angle if supported by the dvd disc (if equipped). Note: • the available selections for each of the above entries varies depending upon the disc. • these selections can only be made while playing a dvd. • ves™ power - allows you to turn ves...

  • Page 257

    Audio language — if equipped selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting ⬙other.⬙ enter the country code using the tune/scroll control knob to scroll ...

  • Page 258

    Note: the user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings. Am and fm buttons press the buttons to select...

  • Page 259

    Operation instructions - (disc mode for cd and mp3/wma audio play, dvd-video) the radio dvd player and many dvd discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the dvd disc does not match the region code for the radio dvd play...

  • Page 260

    Eject button — ejecting compact disc(s) press the eject button and the pushbutton with the corresponding number (1-6) where the cd was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ejecting disc⬙ when the disc is being ejected and prompt the user...

  • Page 261

    Notes on playing mp3/wma files the radio can play mp3/wma files; however, acceptable mp3/wma file recording media and formats are limited. When writing mp3/wma files, pay attention to the following restrictions. Supported media (disc types) the mp3/wma file recording media supported by the radio are...

  • Page 262

    If a disc contains multi-formats, such as cd audio and mp3/wma tracks, the radio will only play the mp3/ wma tracks on that disc. Supported mp3/wma file formats the radio will recognize only files with the *.Mp3/wma extension as mp3/wma files. Non-mp3/wma files named with the *.Mp3/wma extension may...

  • Page 263

    Playback of mp3/wma files when a medium containing mp3/wma data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3/wma files. Loading times for playback of mp3/wma files may be affected by the ...

  • Page 264

    Press and hold the info button again for three seconds to return to ⬙elapsed time⬙ display. Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3/wma player, cassette player, or microphone and utilize...

  • Page 265

    Operating instructions — voice command system (if equipped) for the radio, refer to “voice command” in the uconnect™ user manual located on the dvd for further details. Operating instructions - uconnect™ phone (if equipped) refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd f...

  • Page 266

    Uconnect™ multimedia (satellite radio) — if equipped satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is sirius satellite radio. This service offers over 130 channels of music, sports, news, ...

  • Page 267

    Sirius id number will display. The sirius id number display will time out in two minutes. Press any button on the radio to exit this screen. Selecting uconnect™ multimedia (satellite) mode press the sat button until ⬙sat⬙ appears in the display. A cd may remain in the radio while in the satellite ra...

  • Page 268

    Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without st...

  • Page 269

    By pressing the seek button when the music type function is active, the radio will be tuned to the next channel with the same selected music type name. If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the prese...

  • Page 270

    Media center 730n/430/430n (rhr/rer/rbz/ rhb) cd/dvd/hdd/nav — if equipped note: the sales code is located on the lower right side of the unit’s faceplate. Refer to your uconnect™ multimedia rhr, rer, rbz or rhb user’s manual for detailed operating instructions. Operating instructions (voice command...

  • Page 271

    Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...

  • Page 272

    4. Adjust the minutes using the right side tune/ scroll control knob. Press the tune/scroll control knob to save time change. 5. To exit, press any button/knob, or wait five seconds. Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the ...

  • Page 273

    Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Am/fm button press the buttons to select either am or fm mode. Set/rnd button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, press the set/rnd button...

  • Page 274

    Operation instructions — cd mode for cd and mp3 audio play note: • the ignition switch must be in the on or acc position to operate the radio. • this radio is capable of playing compact discs (cd), recordable compact discs (cd-r), rewritable compact discs (cd-rw), compact discs with mp3 tracks and m...

  • Page 275

    Eject button - ejecting a cd press the eject button to eject the cd. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the cd is not removed, the radio will reinsert the cd but will not play it. A disc can be ejected with the radio and ignition off. Note: ...

  • Page 276

    Set/rnd button (random play button) press this button while the cd is playing to activate random play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right seek button to move to the next ran- domly selected track. Press the ...

  • Page 277

    • maximum number of characters in file/folder names: • level 1: 12 (including a separator ⬙.⬙ and a three- character extension) • level 2: 31 (including a separator ⬙.⬙ and a three- character extension) multisession disc formats are supported by the radio. Multisession discs may contain combinations...

  • Page 278

    Playlist files are not supported. Mp3 pro files are not supported. Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading time...

  • Page 279

    Time button (auxiliary mode) press this button to change the display to time of day. The time of day will display for five seconds (when ignition is off). Media center 130 with satellite radio (sales code res+rsc) note: the radio sales code is located on the lower right side of the radio faceplate. ...

  • Page 280

    Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume control the electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the o...

  • Page 281

    If your vehicle is not equipped with or this feature is not available on your vehicle, a “not equipped with uconnect phone” message will display on the radio screen. Time button press the time button to alternate display of the time and radio frequency. Clock setting procedure 1. Press and hold the ...

  • Page 282

    Tune control turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decrease the frequency. Setting the tone, balance, and fade push the rotary tune/scroll control knob and bass will display. Turn the tune/scroll control knob to the right or left to increase or decreas...

  • Page 283

    Toggle the music type button to select the following format types: program type 16-digit character display no program type or undefined none adult hits adlt hit classical classicl classic rock cls rock college college country country foreign language language information inform jazz jazz news news n...

  • Page 284

    If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the preset station. Setup button pressing the setup button allows you to select between the following items: • set clock — pressing the select button will allow ...

  • Page 285

    Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to pushbutton memory (12 am and 12 fm stations). Disc/aux button pressing the disc/aux button will allow you to switch from am/fm modes to disc/a...

  • Page 286

    Caution! • this cd player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. • do not use adhesive labels. These labels can peel away and jam the player mechanism. • res is a single cd player. Do not attempt to insert a second cd if one is alrea...

  • Page 287

    Rw/ff press and hold ff (fast forward) and the cd player will begin to fast forward until ff is released or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm button press the button to select either am or fm mode. Set/rnd button (random play button) press t...

  • Page 288

    • maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. With a maximum number of files, exce...

  • Page 289

    Rates (vbr) are also supported. The majority of mp3 files use a 44.1 khz sampling rate and a 192, 160, 128, 96 or vbr bit rates. Mpeg specification sampling fre- quency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio ...

  • Page 290

    List button (cd mode for mp3 play) pressing the list button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the tune/scroll control knob. Selecting a folder by pressing the tune/scroll control knob will begin playing the files contained in that folde...

  • Page 291

    Time button (auxiliary mode) press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is off). Uconnect™ multimedia (satellite radio) — if equipped satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide c...

  • Page 292

    Using the tune/scroll control knob until sirius id is selected. Press the tune/scroll control knob and the sirius id number will display. The sirius id number display will time out in two minutes. Press any button on the radio to exit this screen. Selecting uconnect™ multimedia (satellite) mode pres...

  • Page 293

    Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without st...

  • Page 294

    By pressing the seek button when the music type function is active, the radio will be tuned to the next channel with the same selected music type name. If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the prese...

  • Page 295

    Operating instructions - uconnect™ phone (if equipped) refer to “uconnect™ phone” in “understanding the features if your vehicle”. Steering wheel audio controls the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The ...

  • Page 296

    Pressing the center button will make the radio switch between the various modes available (am/fm/sat/ cd/hdd/aux/ves, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in. The follo...

  • Page 297

    Cd/dvd disc maintenance to keep a cd/dvd in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch...

  • Page 298

    Manual heating and air conditioning the manual temperature controls consist of a series of outer rotary dials and inner push knobs. Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control...

  • Page 299

    Note: if your air conditioning performance seems lower than expected, check the front of the a/c con- denser located in front of the radiator for an accumula- tion of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors m...

  • Page 300

    Floor air is directed through the floor outlets with a small amount flowing through the defrost and side window demist outlets. Mix air is directed through the floor, defrost, and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat to the windshiel...

  • Page 301

    Note: • continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. • the use of the recirculation mode in cold or damp weather will cause windows to fog on the inside, because of moisture buildup inside the vehi...

  • Page 302

    Automatic temperature control (atc) — if equipped automatic operation the automatic temperature control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Operation of the system is quite simple. 1. Turn the mode contro...

  • Page 303

    The recommended setting for maximum comfort is 72°f (22°c) for the average person; however, this may vary. Note: • the temperature setting can be adjusted at anytime without affecting automatic operation. • pressing the air conditioning control button while in auto mode will cause the led in the con...

  • Page 304

    302 understanding your instrument panel.

  • Page 305

    The operator can override the auto mode setting to change airflow distribution by rotating the mode control knob (on the right) to one of the following positions. • panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center in...

  • Page 306

    • air conditioner control press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control dial. Press this but- ton a second time to turn off the air conditionin...

  • Page 307

    • most of the time, when in automatic operation, you can temporarily put the system into recirculation mode by pressing the recirculation button. However, under certain conditions, while in automatic mode, the system is blowing air out the defrost vents. When these conditions are present, and the re...

  • Page 308

    Window fogging interior fogging on the windshield can be quickly re- moved by turning the mode selector to defrost. The defrost/floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed. Vehicle windows ten...

  • Page 309

    Control setting suggestions for various weather conditions 4 understanding your instrument panel 307.

  • Page 311: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 313 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 313 ▫ extreme cold weather (below –20°f or –29°c) . . . . . . . . . . . . . . . . 314 ▫ if engine fails to start . . . . . . . . . . . . . . ....

  • Page 312

    䡵 off-road driving tips . . . . . . . . . . . . . . . . . . 333 ▫ when to use 4wd low range . . . . . . . . . . 333 ▫ driving through water . . . . . . . . . . . . . . . . 334 ▫ driving in snow, mud and sand . . . . . . . . . 335 ▫ hill climbing . . . . . . . . . . . . . . . . . . . . . . . 335 ▫ tr...

  • Page 313

    䡵 tires — general information . . . . . . . . . . . . . 366 ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . 366 ▫ tire inflation pressures . . . . . . . . . . . . . . . . 367 ▫ tire pressures for high speed operation . . . 369 ▫ radial-ply tires . . . . . . . . . . . . . . . . . . . . ...

  • Page 314

    ▫ fuel system cautions . . . . . . . . . . . . . . . . . 391 ▫ carbon monoxide warnings . . . . . . . . . . . . 392 䡵 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . 393 ▫ fuel filler cap (gas cap) . . . . . . . . . . . . . . 393 ▫ loose fuel filler cap message . . . . . . . . . . . 39...

  • Page 315

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seri- ou...

  • Page 316

    Extreme cold weather (below –20°f or –29°c) to ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is recommended. If engine fails to start warning! • never pour fuel or other flammable liquids into the t...

  • Page 317

    With tip start if the engine fails to start after you have followed the “normal starting” or “extreme cold weather” proce- dures, it may be flooded. To clear any excess fuel, press the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the start position and re...

  • Page 318

    Automatic transmission caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle spee...

  • Page 319

    Brake/transmission shift interlock system this vehicle is equipped with a brake transmission shift interlock system (btsi) that holds the shift lever in the park position when the ignition switch is in the lock position. To move the shift lever out of the park position, the ignition switch must be t...

  • Page 320

    The parking brake when leaving the vehicle in this range. Always apply the parking brake first, then place the shift lever in the park position. Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle mov...

  • Page 321

    2 (second) this range is used for moderate grades and to assist braking on dry pavement or in mud and snow. Begins at a stop in low gear with automatic upshift into second gear. Will not shift into third gear. 1 (first) this range is used for hard pulling at low speeds in mud, sand, snow, or on stee...

  • Page 322

    Note: tow/haul mode locks out overdrive. The “tow/haul indicator light” will illuminate in the instrument cluster to indicate when the switch has been activated. Pressing the switch a second time restores normal operation. If the tow/haul mode is desired, the switch must be pressed each time the eng...

  • Page 323

    If the problem is no longer detected, the transmission will return to normal operation. If the problem persists, park, reverse, and neutral will continue to oper- ate. Only second gear range will operate in the drive position. Have the transmission checked at your autho- rized dealer as soon as poss...

  • Page 324

    Position locks the front driveshaft and rear driveshaft together and forces the front and rear wheels to rotate at the same speed. Use the transfer case neutral position for recreational towing only. Refer to “recreational towing” in “starting and operating” for further information. Caution! • do no...

  • Page 325

    Warning! • you or others could be injured if you leave the vehicle unattended with the transfer case in the neutral position without first fully engaging the parking brake. The transfer case neutral position disengages both the front driveshaft and rear driveshaft from the powertrain and it will all...

  • Page 326

    Shift positions the transfer case switch is located on the center console next to the shift lever. 2wd rear wheel drive high range - this range is used for normal street and highway driving on dry hard-surfaced roads. 4wd lock four-wheel drive high range - this range locks the front driveshaft and r...

  • Page 327

    N neutral - this range disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to “recreational towing” in “starting and operating” for further information. Transfer case position indicator lights the four-wheel drive ind...

  • Page 328

    The vehicle stopped or in motion. With the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after mov- ing the transfer case switch. If the vehicle is stopped, the ignition switch must be in the on position with the engine either off ...

  • Page 329

    Alternate procedure 1. Bring the vehicle to a complete stop. 2. With the ignition switch in the on position, and the engine off or running, shift the transmission into neutral. 3. Move the transfer case switch to the desired position. 4. After the desired position indicator light is on (not flashing...

  • Page 330

    This transfer case is intended to be driven in either the two-wheel drive position (2wd) or the four-wheel drive auto position (4wd auto) for normal street and high- way conditions such as dry hard-surfaced roads. For added capability when traversing steep grades, rough terrain, or extremely poor tr...

  • Page 331

    Warning! • you or others could be injured if you leave the vehicle unattended with the transfer case in the neutral position without first fully engaging the parking brake. The transfer case neutral position disengages both the front driveshaft and rear driveshaft from the powertrain and it will all...

  • Page 332

    Shift positions the transfer case switch is located on the center console next to the shift lever. 2wd rear wheel drive high range - this range is for normal street and highway driving on dry hard-surfaced roads. 4wd auto four-wheel drive auto high range – this active on- demand range makes availabl...

  • Page 333

    N neutral - this range disengages both the front driveshaft and rear driveshaft from the powertrain. To be used for flat towing behind another vehicle. Refer to “recreational towing” in “starting and operating” for further information. Transfer case position indicator lights the four-wheel drive ind...

  • Page 334

    Vehicle stopped or in motion. If the vehicle is stopped, the ignition switch must be in the on position with the engine either off or running. This shift cannot be completed if the ignition switch is in the acc position. 2wd or 4wd auto to 4wd low when shifting into or out of 4wd low, some gear nois...

  • Page 335

    Process, then the indicator light will flash, and the current transfer case position will be maintained. To retry a shift, move the transfer case switch back to the original position, make certain all shift requirements have been met, wait five seconds, and try the shift again. The ignition switch m...

  • Page 336

    Driving through water although your vehicle is capable of driving through water, there are a number of precautions that must be considered before entering the water: caution! When driving through water, do not exceed 5 mph (8 km/h). Always check water depth before entering as a precaution, and check...

  • Page 337

    Maintenance after driving through deep water, inspect your vehicle fluids and lubricants (engine, transmission, axle, transfer case) to assure they have not been contaminated. Con- taminated fluids and lubricants (milky, foamy in appear- ance) should be flushed/changed as soon as possible to prevent...

  • Page 338

    Warning! If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle. Always back straight down a hill in reverse gear carefully. Never back down a hill in neutral using only the ...

  • Page 339

    • completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and exhaust system for damage. • inspect the radiator for mud and debris and clean as required. • check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steerin...

  • Page 340

    If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these condi- tions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. Note: • increased noise levels at the end of ...

  • Page 341

    Power steering fluid check checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection efforts through an aut...

  • Page 342

    The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely. When the parking brake is applied with the ignition switc...

  • Page 343

    Make it difficult to move the shift lever out of park. The parking brake should always be applied whenever the driver is not in the vehicle. Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movemen...

  • Page 344

    Anti-lock brake system the anti-lock brake system (abs) is designed to aid the driver in maintaining vehicle control under adverse braking conditions. The system operates with a separate computer to modulate hydraulic pressure, to prevent wheel lock-up and help avoid skidding on slippery surfaces. A...

  • Page 345

    Warning! (continued) • the abs cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that af- forded by the condition of the vehicle brakes and tires or the traction afforded. • the abs cannot prevent collisions, including ...

  • Page 346

    • engines may idle at higher speeds during warm-up, which could cause rear wheels to spin and result in loss of vehicle control. Be especially careful while driving on slippery roads, in close-quarter maneuver- ing, parking, or stopping. • do not drive too fast for road conditions, especially when r...

  • Page 347

    Help avoid skidding on slippery surfaces during braking. Refer to “anti-lock brake system” in “starting and operating” for further information. Warning! The anti-lock brake system (abs) cannot prevent the natural laws of physics from acting on the ve- hicle, nor can it increase the traction afforded...

  • Page 348

    Brake assist system (bas) the bas is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce...

  • Page 349

    Electronic roll mitigation (erm) this system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When erm determines that the rate of change of the steering wheel angle and vehicle’s speed are sufficient to potentially cause wheel li...

  • Page 350

    Time expires, the system will release brake pressure and the vehicle will roll down the hill as normal. The system will release brake pressure in proportion to amount of throttle applied. The following conditions must be met in order for hsa to activate: • the vehicle must be stopped. • the vehicle ...

  • Page 351

    Warning! • if you use a trailer brake controller with your trailer, the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released. In order to avoid rolling ...

  • Page 352

    3. Apply the parking brake. 4. Start the engine. 5. Rotate the steering wheel one-half turn to the left. 6. Press the “esc off” button located in the lower switch bank below the climate control four times within twenty seconds. The “esc off indicator light” should turn on and turn off two times. 7. ...

  • Page 353

    Control, the accelerator pedal will increase vehicle speed in the usual manner. When either the brake or the accelerator is released, hdc will control the vehicle at the original set speed. Note: hdc is available on vehicles equipped with the mp1522 transfer case. • the transfer case must be in 4wd ...

  • Page 354

    2. Press the “hill descent” button. The “hill descent control indicator light” in the instrument cluster will turn on solid. Note: if the transfer case is not in 4wd low range, the “hill descent control indicator light” will flash for five seconds and hdc will not be enabled. Disabling hdc 1. Press ...

  • Page 355

    Light” also flashes when the tcs is active. If the “esc activation/malfunction indicator light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. Warning! The electronic...

  • Page 356

    Partial off – two-wheel drive vehicles and four-wheel drive vehicles in 2wd and 4wd high range the “partial off” mode is intended for driving in deep snow, sand, or gravel. This mode raises the threshold for tcs and esc activation, which allows for more wheel spin than what esc normally allows. The ...

  • Page 357

    Malfunction indicator light” will illuminate and an “esc off” message will appear in the odometer. Press and release the trip odometer button located on the instru- ment cluster to turn off this message. In this mode, esc and tcs are turned off (except for the “limited slip” feature described in the...

  • Page 358

    Esc activation/malfunction indicator light and esc off indicator light the “esc activation/malfunction indicator light” in the instrument cluster will come on when the ignition switch is turned to the on position. It should go out with the engine running. If the “esc activation/malfunction indicator...

  • Page 359

    Tire safety information tire markings note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standar...

  • Page 360

    Tires designed to this standard have the letter “t” molded into the sidewall preceding the size designa- tion. Example: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 r15 lt. Tire sizing ...

  • Page 361

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 362

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 363

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire pressure cold tire inflation pressure is defined as the tire pressure after ...

  • Page 364

    Tire loading and tire pressure tire placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar. Tire and loading information placard tire placard location tire and loading information placard 362 starting and operating.

  • Page 365

    This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. Loading the vehicle maximum load on the ...

  • Page 366

    3. Subtract the combined weight of the driver and pas- sengers from xxx lbs or xxx kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the ...

  • Page 367

    Starting and operating 365.

  • Page 368

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 369

    Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...

  • Page 370

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflation pressure...

  • Page 371

    Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...

  • Page 372

    Vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equip- ment tire and wheel as a spare, a non-matching tempo- rary emergency use spare may be equipped with your vehicle. Temporary u...

  • Page 373

    Warning! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnin...

  • Page 374

    Warning! Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your tire and loading info...

  • Page 375

    These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Caution! Proper operation of four-wheel drive vehicles de- pends on tires of equa...

  • Page 376

    Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with...

  • Page 377

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 378

    Caution! To avoid damage to your vehicle, tires, or chains, observe the following precautions: • do not use tire chains on vehicles equipped with tires other than p225/75r16 or smaller tires. There may not be adequate clearance for the chains and you are risking structural or body damage to your veh...

  • Page 379

    These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. Tire rotation recommendations the tires on the front and rear of your vehicle operate at different loads and perform different steering, handling, and braking functions. For these reasons, they wear at un...

  • Page 380

    Caution! Proper operation of four-wheel drive vehicles de- pends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Tire rotation schedule should be followed to balance tire wear. Tire pressure monitor system (tpms) the ti...

  • Page 381

    Cold placard pressure in order for the “tire pressure monitoring telltale light” to turn off. The system will automatically update and the “tire pressure monitoring telltale light” will turn off once the system receives the updated tire pressures. The vehicle may need to be driven for up to 20 minut...

  • Page 382

    Caution! (continued) • after inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the tire pressure moni- toring sensor. Note: • the tpms is not intended to replace normal tire care and ma...

  • Page 383

    The tpms consists of the following components: • receiver module • four tire pressure monitoring sensors • tire pressure monitoring telltale light the matching full-size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The matching full-size spare can be used in pla...

  • Page 384

    Sequence will repeat, providing the system fault still exists. The “tire pressure monitoring telltale light” will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the ...

  • Page 385

    2. If you install the compact spare tire in place of a road tire that has a pressure below the low-pressure warning limit, a chime will sound and the “tpms telltale light” will turn on upon the next ignition key cycle. 3. After driving the vehicle for up to 20 minutes above 15 mph (24 km/h), the “tp...

  • Page 386

    • various tire pressure monitoring system messages, which display in the electronic vehicle information center (evic) • tire pressure monitoring telltale light the matching full size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor. The full size spare can be used in...

  • Page 387

    Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the evic graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display...

  • Page 388

    If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the “tire pressure monitoring telltale light” will no longer flash, and the ⬙check tpm system ⬙ message will no longer display, and a pressure value will display i...

  • Page 389

    Value. The evic will also display a “spare low pressure” message to remind you to service the flat tire. Vehicles with compact spare 1. The compact spare tire does not have a tire pressure monitoring sensor. Therefore, the tpms will not monitor the pressure in the compact spare tire. 2. If you insta...

  • Page 390

    Vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the tpms to receive this information. General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not ...

  • Page 391

    Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the world- wide fuel charter, wwfc) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recom- mends the use of gasoline ...

  • Page 392

    E-85 usage in non-flex fuel vehicles non-ffv vehicles are compatible with gasoline contain- ing 10% ethanol (e10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all of these symptoms: • ...

  • Page 393

    Mmt can be used at levels higher than those allowed in the united states. Mmt is prohibited in federal and california reformulated gasoline. Materials added to fuel all gasoline sold in the united states is required to contain effective detergent additives. Use of additional detergents or other addi...

  • Page 394

    Note: intentional tampering with emissions control systems can result in civil penalties being assessed against you. Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning. (continued) warning! (continued) ...

  • Page 395

    Adding fuel fuel filler cap (gas cap) the gas cap is located behind the fuel filler door, on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehicle. Caution! • damage to the fuel system or emission control system c...

  • Page 396

    Warning! • never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the mil to turn on. • a fire may result if gaso...

  • Page 397

    Vehicle loading certification label as required by national highway traffic safety admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or b-pillar. This label contains the month and year of manufacture, gross vehicle weight rating (gvwr), gross axle...

  • Page 398

    Each axle’s gawr is determined by the components in the system with the lowest load carrying capacity (axle, springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by purchasers for in- creased durability, does not necessarily increase the ve- hicle’s gvwr. Tire size...

  • Page 399

    The front or rear axles has been exceeded, but the total load is within the specified gvwr. If so, weight must be shifted from front to rear, or rear to front, as appropriate until the specified weight limitations are met. Store the heavier items down low and be sure that the weight is distributed e...

  • Page 400

    Exceed the gvwr. Refer to “vehicle loading/vehicle certification label” in “starting and operating” for further information. Gross trailer weight (gtw) the gtw is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or tem- porary) loaded in or on the trailer...

  • Page 401

    Tongue weight (tw) the tongue weight is the downward force exerted on the hitch ball by the trailer. In most cases, it should not be less than 10% or more than 15% of the trailer load. You must consider this as part of the load on your vehicle. Frontal area the frontal area is the maximum height mul...

  • Page 402

    Warning! • an improperly adjusted weight distributing hitch system may reduce handling, stability, brak- ing performance, and could result in a collision. • weight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable ...

  • Page 403

    With weight distributing hitch (correct) improper adjustment of weight-distributing hitch (incorrect) 5 starting and operating 401.

  • Page 404

    Trailer hitch classification your vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional trailer tow prep pack...

  • Page 405

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ transmission model frontal area max. Gtw (gross trailer wt.) max. Tongue wt. (see note) 3.7l/automatic 4x2 32 sq ft (2.97 sq m) 2,000 lbs...

  • Page 406

    When towing trailers with gross trailer weight (gtw) between 3,500 lbs (1 588 kg) and 5,000 lbs (2 268 kg) the following chart provides maximum trailer weight ratings towable for the following engine/transmission combinations, only if using a weight distributing hitch. Engine/ transmission model fro...

  • Page 407

    Trailer and tongue weight always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the gross trailer weight (gtw) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to s...

  • Page 408

    Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the “tire and loading information” placard for the ma...

  • Page 409

    Warning! (continued) • make certain that the load is secured in the trailer and that is will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a coll...

  • Page 410

    Towing requirements – tires − do not attempt to tow a trailer while using a compact spare tire. − proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “tires – general information” in “starting and oper- ating” for information on tire pressur...

  • Page 411

    Caution! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Warning! • do not connect trailer brak...

  • Page 412

    The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground...

  • Page 413

    Towing tips before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. Automatic transmission the “d” range can be selected when towing. However, if frequent shifting occurs while in this range, you will want to activate the tow/haul...

  • Page 414

    Electronic speed control – if equipped − do not use in hilly terrain or with heavy loads. − when using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − use speed control in flat terrain and with light loads to maxim...

  • Page 415

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheel off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • transmission in park • transfer case in neutral (n) • tow in forward direction dol...

  • Page 416

    Recreational towing — two-wheel drive models recreational towing is allowed if the rear wheels are off the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this proce- dure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufa...

  • Page 417

    And reinstallation procedures, including flange orienta- tion/alignment, use of thread-locking compound, proper bolt torque specifications, etc. Caution! Towing with the rear wheels on the ground (while the driveshaft is connected) will cause severe trans- mission damage. Damage from improper towing...

  • Page 418

    Shifting into neutral (n) warning! You or others could be injured if you leave the vehicle unattended with the transfer case in the neutral (n) position without first fully engaging the parking brake. The transfer case neutral (n) position disengages both the front and rear drive- shafts from the po...

  • Page 419

    Button (located above the selector switch) for four sec- onds, until the light behind the n symbol starts to blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift to n (neutral) is complete. 7. After the shift is completed and the neutral light comes on, re...

  • Page 420

    14. Attach the vehicle to the tow vehicle using a suitable tow bar. 15. Release the parking brake. 16. Disconnect the negative battery cable, and secure it away from the negative battery post. Note: • steps 1 through 5 are requirements that must be met prior to pressing the neutral (n) button, and m...

  • Page 421

    6. Press and hold the brake pedal. 7. Shift the transmission into neutral. 8. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case n (neutral) button (located above the selector switch) for one second. 9. After the n (neutral) indicator light turns off, rel...

  • Page 422

    17. Shift the transmission into drive, release the brake pedal, and check that the vehicle operates normally. Note: • steps 1 through 7 are requirements that must be met prior to pressing the neutral (neutral) button, and must continue to be met until the shift has been completed. If any of these re...

  • Page 423: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . . . . . . 422 䡵 if your engine overheats . . . . . . . . . . . . . . . . 422 䡵 jacking and tire changing . . . . . . . . . . . . . . . 423 ▫ jack location . . . . . . . . . . . . . . . . . . . . . . . 424 ▫ spare tire...

  • Page 424

    Hazard warning flashers the hazard warning flasher switch is located in the switch bank below the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press...

  • Page 425

    Note: there are steps that you can take to slow down an impending overheat condition: • if your air conditioner (a/c) is on, turn it off. The a/c system adds heat to the engine cooling system and turning the a/c off can help remove this heat. • you can also turn the temperature control to maximum he...

  • Page 426

    Warning! (continued) • the jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack location the scissor-type jack and tire changin...

  • Page 427

    Spare tire removal fit the jack handle extension over the drive nut located in the rear cargo area inside the vehicle. Use the lug wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle. Cauti...

  • Page 428

    Preparations for jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid being hit when operati...

  • Page 429

    Warning! (continued) • turn on the hazard warning flasher. • block the wheel diagonally opposite the wheel to be raised. • set the parking brake firmly and set an automatic transmission in park; a manual transmission in reverse. • never start or run the engine with the vehicle on a jack. • do not le...

  • Page 430

    3. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 4. Locate the jack as shown. For the front tires, place it (rearward) of the notch on the body weld seam behind wheel to be changed. For the rear tires, place it under the ax...

  • Page 431

    And enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. Warning! Raising the vehicle higher than necessary can make the vehicle less stable and cause a collision. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to r...

  • Page 432

    12. Remove blocks from wheels. Jump-starting procedures if your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the p...

  • Page 433

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 434

    3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is off. Warning! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-start...

  • Page 435

    Warning! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then st...

  • Page 436

    Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between drive and reverse. Using minimal accelerator pedal pressure to m...

  • Page 437

    Warning! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously w...

  • Page 438

    3. Turn the ignition to the on/run position without starting the engine. 4. Press and maintain firm pressure on the brake pedal. 5. Using a screwdriver, reach into the opening and press and hold the shift override lever down. 6. Move the shift lever into the neutral position. 7. The vehicle may then...

  • Page 439

    Towing condition wheels off the ground 2wd models 4wd models flat tow none if transmission is operable: • transmission in neutral • 30 mph max speed(48 km/h) • 15 miles (24 km) max distance see instructions in “recreational tow- ing” under “starting and operating” • transmission in park • transfer c...

  • Page 440

    If the vehicle’s battery is discharged, refer to “shift lever override” in “what to do in emergencies” for instruc- tions on shifting the automatic transmission out of the park position for towing. Caution! • do not attempt to use sling type equipment when towing. When securing the vehicle to a flat...

  • Page 441

    Caution! Towing faster than 30 mph (48 km/h) or farther than 15 miles (24 km) with rear wheels on the ground can cause severe damage to the transmission. Such dam- age is not covered by the new vehicle limited warranty. If the transmission is not operable, or the vehicle must be towed faster than 30...

  • Page 442

    Four-wheel drive models the manufacturer recommends towing with all wheels off the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of vehicle raised and the opposite end on a towing dolly. If flatbed equipment is not available, and the transfer case is operable, the ve...

  • Page 443: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 3.7l . . . . . . . . . . . . . 443 䡵 onboard diagnostic system — obd ii . . . . . . 444 ▫ loose fuel filler cap message . . . . . . . . . . . 444 䡵 emissions inspection and maintenance programs . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 444

    ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 458 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 464 ▫ automatic transmission . . . . . . . . . . . . . . . 466 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . 468 ▫ front/rear axle fluid . . . . . . . . . . . ....

  • Page 445

    Engine compartment — 3.7l 1 — air cleaner filter 6 — washer fluid reservoir 2 — engine oil dipstick 7 — engine coolant reservoir 3 — brake fluid reservoir 8 — engine oil fill 4 — integrated power module (fuses) 9 — coolant pressure cap 5 — battery 7 maintaining your vehicle 443.

  • Page 446

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 447

    “electronic vehicle information center (evic)” in “un- derstanding your instrument panel” for further informa- tion. Tighten the gas cap until a ⬙clicking⬙ sound is heard. This is an indication that the gas cap is properly tight- ened. Press the odometer reset button to turn the message off. If the ...

  • Page 448

    3. As soon as you turn the ignition switch to the on position, you will see the mil symbol come on as part of a normal bulb check. 4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn of...

  • Page 449

    Dealer service your authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting...

  • Page 450

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...

  • Page 451

    Note: under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first. Engine oil selection for best performance and maximum protection under all types of operating conditions, the manufacturer recom- mends engine oils that are api certified an...

  • Page 452

    Synthetic engine oils you may use synthetic engine oils provided the recom- mended oil quality requirements are met, and the recom- mended maintenance intervals for oil and filter changes are followed. Materials added to engine oil do not add any supplemental additives, other than leak detection dye...

  • Page 453

    Warning! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine comp...

  • Page 454

    Warning! (continued) • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories...

  • Page 455

    Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at thi...

  • Page 456

    Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency and is an ozone-saving product. How- ever, the manufacturer recommends that air conditioning service be performed by an authorized dealer or o...

  • Page 457

    Amount of a high quality lubricant, such as mopar 威 lock cylinder lubricant or equivalent, directly into the lock cylinder. Windshield wiper blades clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer...

  • Page 458

    Exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. Warning! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Ex...

  • Page 459

    Warning! (continued) • a hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your ve- hicle in areas where your exhaust system can contact anything that can burn. Ca...

  • Page 460

    Note: intentional tampering with emissions control systems can result in civil penalties being assessed against you. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest severe and abnormal catalyst overheating. If this occurs, stop the vehicle, turn ...

  • Page 461

    Rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the front of the a/c condenser (if equipped) or radiator for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the a/c conde...

  • Page 462

    Caution! • mixing of engine coolant (antifreeze) other than specified hoat engine coolant (antifreeze), may result in engine damage and may decrease corro- sion protection. If a non-hoat engine coolant (antifreeze) is introduced into the cooling system in an emergency, it should be replaced with the...

  • Page 463

    • mix a minimum solution of 50% hoat engine coolant and distilled water. Use higher concentrations (not to exceed 70%) if temperatures below ⫺34°f (⫺37°c) are anticipated. • use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution. ...

  • Page 464

    Warning! (continued) • do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result. Disposal of used engine coolant used ethylene glycol based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your lo...

  • Page 465

    Points to remember note: when the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is nor- mally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vapor- ized when th...

  • Page 466

    • do not change the thermostat for summer or winter operation. If replacement is ever necessary, install only the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. Brake system in order to assure brake system performan...

  • Page 467

    Warning! • use only manufacturer’s recommended brake fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid ...

  • Page 468

    Warning! (continued) • do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Automatic transmission selection of lubricant it is important that the proper lubricant is ...

  • Page 469

    Caution! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the new vehicle limited warranty. Fluid level check your vehicle is equipped with a capped transmission oil fill tube that is sealed and it should not b...

  • Page 470

    Transfer case fluid level check the fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position. Adding fluid fluid should be added only to fill hole until fluid begins to run out of the hole. Draining fluid first remove the fill plug (1), then the drain plu...

  • Page 471

    Frequency of fluid change under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary unless the fluid becomes contaminated with water. Change the fluid immediately if contaminated with water. F...

  • Page 472

    Sky slider™ top care immediate removal of any contaminant is recommended. Regular washing of the top will enhance its life and appearance, and make successive cleaning easier. Do not subject the top to excessive heat. Frequently vacuum the top and tracks. Periodically wipe dust and dirt from the top...

  • Page 473

    • allow the top to dry before opening. Vacuuming the top with a wet/dry shop vacuum will decrease the tops drying time, ensure removal of all dirt, and delete streaks in the material. • multiple cleanings may be necessary to remove stub- born stains. If stains persist, contact your local autho- rize...

  • Page 474

    Weather strip care lubricate the weather strips periodically with mopar 威 weather strip lubricant or equivalent, to keep them soft and pliable. Appearance care and protection from corrosion protection of body and paint from corrosion vehicle body care requirements vary according to geo- graphic loca...

  • Page 475

    Washing • wash your vehicle regularly. Always wash your ve- hicle in the shade using mopar 威 car wash or equiva- lent, or a mild car wash soap, and rinse the panels completely with clear water. • if insects, tar, or other similar deposits have accumu- lated on your vehicle, use mopar 威 super kleen b...

  • Page 476

    • if you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner. • if your vehicle is damaged due to a collision or similar cause, which destroys the paint and protective coating, have your vehicle repaired ...

  • Page 477

    • for tough stains, apply mopar威 total clean or equivalent, or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove soap residue. • for grease stains, apply mopar威 multi-purpose cleaner or equivalent to a clean, damp cloth and remove the stain. Use a fr...

  • Page 478

    Leather upholstery. Application of a leather conditioner is not required to maintain the original condition. Warning! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning headlights your vehicle has ...

  • Page 479

    When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror. Cleaning plastic instrument cluster lenses the lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be...

  • Page 480

    Fuses totally integrated power module the totally integrated power module is located in the engine compartment near the battery. This center contains cartridge fuses, mini-fuses and relays. A label that identi- fies each component is printed on the inside of the cover. Cavity cartridge fuse mini- fu...

  • Page 481

    Cavity cartridge fuse mini- fuse description j8 40 amp green — power seats – if equipped j9 — — — j10 — — — j11 30 amp pink — thatchm lock/unlock – if equipped j13 60 amp yellow — ignition off draw j14 40 amp green — rear defroster – if equipped j15 40 amp green — front blower j17 40 amp green — sta...

  • Page 482

    Cavity cartridge fuse mini- fuse description m5 — 25 amp natural power inverter – if equipped m6 — 20 amp yellow rain sensor – if equipped m7 — 20 amp yellow cigar lighter m8 — 20 amp yellow front heated seats – if equipped m9 — — — m10 — 15 amp blue ignition off draw - vehicle entertainment system,...

  • Page 483

    Cavity cartridge fuse mini- fuse description m16 — 10 amp red airbag module m17 — 15 amp blue exterior lighting – left front park and side marker, left tail and running, license lights m18 — 15 amp blue exterior lighting – right front park and side marker, right tail and running lights m19 — 25 amp ...

  • Page 484

    Cavity cartridge fuse mini- fuse description m26 — 10 amp red power mirror switch/ driver window switch m27 — 10 amp red ignition switch/ wireless control module/steering col- umn lock – if equipped m28 — 10 amp red powertrain control module m29 — 10 amp red occupant classification module m30 — 15 a...

  • Page 485

    Cavity cartridge fuse mini- fuse description m36 — — — m37 — 10 amp red antilock brakes/ stability control sys- tem module/stop light switch/fuel pump relay m38 — 25 amp natural door and liftgate lock/unlock motors caution! • when installing the integrated power module cover, it is important to ensu...

  • Page 486

    Replacement bulbs light bulbs – interior bulb no. Cargo lamp. . . . . . . . . . . . . . . . . . . . . . . . . Tl212–2 overhead console lamp . . . . . . . . . . . . . Plw214–2a reading lamp . . . . . . . . . . . . . . . . . . . . . . Wl212–2 light bulbs – exterior bulb no. Headlamp . . . . . . . . . ...

  • Page 487

    Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Install the bulb and connector assembly into the headlamp housing and rotate the lock ring clockwise to...

  • Page 488

    3. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the fog lamp housing. 4. Pull the bulb out of the socket and insert the replace- ment bulb. Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb ...

  • Page 489

    Fluid capacities u.S. Metric fuel (approximate) 19.5 gallons 73.8 liters engine oil with filter 3.7 liter engine (sae 5w-20, api certified) 5 quarts 4.7 liters cooling system * 3.7 liter engine (mopar 威 antifreeze/engine coolant 5 year/100,000 mile formula or equivalent) 14 quarts 13.3 liters * incl...

  • Page 490

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hy- brid organic additive technology) or equivalent. Engine oil use api certified sae 5w-20 engine oil, meeting the requirements of chr...

  • Page 491

    Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Front axle sae 80w-90 multi-purpose type, g...

  • Page 493: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 492 ▫ required maintenance intervals . . . . . . . . . . 494 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 494

    Maintenance schedule the scheduled maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent main- tenance may be needed for vehicles in severe operating condition...

  • Page 495

    Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been six months since your last oil change even if the oil change indicator message is not illumi- nated. • change your engine oil more often if you drive your vehicle off...

  • Page 496

    Once a month • check tire pressure and look for unusual wear or damage. • inspect the battery and clean and tighten the terminals as required. • check the fluid levels of the coolant reservoir and the brake master cylinder, add as needed. • check all lights and other electrical items for correct ope...

  • Page 497

    8,000 miles (13,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer reading date repair order # dealer code signature, authorized ser...

  • Page 498

    24,000 miles (39,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the front ...

  • Page 499

    40,000 miles (65,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 500

    56,000 miles (91,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 501

    72,000 miles (117,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fron...

  • Page 502

    88,000 miles (143,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer reading date repair order # dealer code signature, authorize...

  • Page 503

    96,000 miles (156,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏ replace the engine air cleaner filter. ❏ replace the spark plugs (3...

  • Page 504

    104,000 miles (169,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ flush and replace engine coolant at 104,000 miles (169,00 km) or ...

  • Page 505

    120,000 miles (195,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fr...

  • Page 506

    128,000 miles (208,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ replace the engine air cleaner filter. ❏ replace the ignition cab...

  • Page 507

    144,000 miles (234,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). ❏ if using your vehicle for any of the following: dusty or off-roa...

  • Page 508

    † this maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about...

  • Page 509: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509 ▫ prepare for the appointment . . . . . . . . . . . 509 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 509 ▫ be reasonable with r...

  • Page 510

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 515 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 515 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 515 ▫ temperature grades . . . . . . . . . . . . . . . . . . 51...

  • Page 511

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...

  • Page 512

    This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...

  • Page 513

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 514

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...

  • Page 515

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 516

    • service manuals these comprehensive service manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing chrysler group llc vehicles. A complete working knowledge of the vehicle, system, and/or...

  • Page 517

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 518

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 519: Index

    Index 10

  • Page 520

    About your brakes . . . . . . . . . . . . . . . . . . . . . . . 339 abs (anti-lock brake system) . . . . . . . . . . . . 342,344 adding engine coolant (antifreeze) . . . . . . . . . . 460 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 additives, fuel . . . . . . . . . . . . . ...

  • Page 521

    Automatic door locks . . . . . . . . . . . . . . . . . . . 31,32 automatic headlights . . . . . . . . . . . . . . . . . . . . 159 automatic oil change indicator . . . . . . . . . . 232,239 automatic temperature control (atc) . . . . . . . . . 300 automatic transaxle . . . . . . . . . . . . . . . . ....

  • Page 522

    Bulbs, light . . . . . . . . . . . . . . . . . . . . . . . . . . 91,484 calibration, compass . . . . . . . . . . . . . . . . . . . . . 242 capacities, fluid . . . . . . . . . . . . . . . . . . . . . . . . 487 caps, filler fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 oil (engi...

  • Page 523

    Compact disc (cd) maintenance . . . . . . . . . . . . . 295 compact spare tire . . . . . . . . . . . . . . . . . . . . . . 370 compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 compass calibration . . . . . . . . . . . . . . . . . . . . . 242 compass variance . . . . . . . . . ...

  • Page 524

    Disposal antifreeze (engine coolant) . . . . . . . . . . . . . 462 engine oil . . . . . . . . . . . . . . . . . . . . . . . . . 450 door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 door locks, automatic . . . . . . . . . . . . . . . . . . . . 31 door opener, garage . . . . . ....

  • Page 525

    Coolant (antifreeze) . . . . . . . . . . . . . . . . 458,488 cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 458 exhaust gas caution . . . . . . . . . . . . . . . . 88,392 fails to start . . . . . . . . . . . . . . . . . . . . . . . . 314 flooded, starting . . . . . . . . . . . . . . ....

  • Page 526

    Flashers hazard warning . . . . . . . . . . . . . . . . . . . . . 422 turn signal . . . . . . . . . . . . . . 91,162,223,485,486 flipper glass, liftgate . . . . . . . . . . . . . . . . . . . . . 40 flooded engine starting . . . . . . . . . . . . . . . . . . . 314 floor console . . . . . . . . . . . ...

  • Page 527

    Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478 garage door opener (homelink®) . . . . . . . . . . . 183 gas cap (fuel filler cap) . . . . . . . . . . . . 393,394,444 gas gauge (fuel gauge) . . . . . . . . . . . . . . . . . . . 220 gasoline (fuel) . . . . . . . . . . . . . ...

  • Page 528

    Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 replacing . . . . . . . . . . . . . . . . . . . . . . . . . . 484 switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 time delay . . . . . . . . . . . . . . . . . . . . . . . . . 160 heated mirrors . . . . . . . . . ....

  • Page 529

    Jack location . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 jack operation . . . . . . . . . . . . . . . . . . . . . . . 423,426 jacking instructions . . . . . . . . . . . . . . . . . . . . . . 426 jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . 430 key-in reminder . . ...

  • Page 530

    Electronic stability program (esp) indicator . . 356 engine temperature warning . . . . . . . . . . . . 227 exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 fog . . . . . . . . . . . . . . . . . . . . . . . . . 161,223,485 four-wheel drive indicator . . 226,227,230,325,331 hazard ...

  • Page 531

    Loading vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 395 tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362 locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 auto unlock . . . . . . . . . . . . . . . . . . . . . . . . . 32 automatic door . . ....

  • Page 532

    Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 modifications/alterations, vehicle . . . . . . . . . . . . . 8 monitor, tire pressure system . . . . . . . . . . . . . . . 378 mopar parts . . . . . . . . . . . . . . . . . . . . . . . . . 446,512 mtbe/etbe . . . . . . . . . . . . . ...

  • Page 533

    Overdrive off switch . . . . . . . . . . . . . . . . . . . . 319 overheating, engine . . . . . . . . . . . . . . . . . . . 228,422 owner’s manual (operator manual) . . . . . . . . . 5,513 paint care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472 paint damage . . . . . . . . . . . . . ...

  • Page 534

    Radio operation . . . . . . . . . . . . . . . . . . . . . . . . 295 rain sensitive wiper system . . . . . . . . . . . . . . . . 168 rear axle (differential) . . . . . . . . . . . . . . . . . . . . 469 rear park sense system . . . . . . . . . . . . . . . . . . . 175 rear seat, folding . . . . . . . ....

  • Page 535

    Rotation, tires . . . . . . . . . . . . . . . . . . . . . . . . . . 377 safety checks inside vehicle . . . . . . . . . . . . . . . . . 89 safety checks outside vehicle . . . . . . . . . . . . . . . 91 safety defects, reporting . . . . . . . . . . . . . . . . . . 512 safety information, tire . . . . ...

  • Page 536

    Selection of coolant (antifreeze) . . . . . . . . . . 459,488 selection of oil . . . . . . . . . . . . . . . . . . . . . . . . . 449 sentry key (immobilizer) . . . . . . . . . . . . . . . . . . . 14 sentry key programming . . . . . . . . . . . . . . . . . . . 16 sentry key replacement . . . . . . . ...

  • Page 537

    Steering power . . . . . . . . . . . . . . . . . . . . . . . . . . 337,339 tilt column . . . . . . . . . . . . . . . . . . . . . . . . 170 wheel, tilt . . . . . . . . . . . . . . . . . . . . . . . . . 170 steering wheel audio controls . . . . . . . . . . . . . . 293 steering wheel mounted sound syst...

  • Page 538

    General information . . . . . . . . . . . . . . . . . . 366 high speed . . . . . . . . . . . . . . . . . . . . . . . . . 369 inflation pressures . . . . . . . . . . . . . . . . . . . . 367 jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 life of tires . . . . . . . . . . . . . . ....

  • Page 539

    Transaxle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 automatic . . . . . . . . . . . . . . . . . . . . . . . . . 316 operation . . . . . . . . . . . . . . . . . . . . . . . . . . 316 transfer case . . . . . . . . . . . . . . . . . . . . . . . . . . . 468 fluid . . . . . . . . . . ...

  • Page 540

    Voice recognition system (vr) . . . . . . . . . . . . . . 133 warning flasher, hazard . . . . . . . . . . . . . . . . . . 422 warning lights (instrument cluster description) . . . . . . . . . . . . . 220 warning, roll over . . . . . . . . . . . . . . . . . . . . . . . . 4 warnings and cautions . . ....

  • Page 541

    291680.Ps 11jk72-126-aa chrysler 1" gutter 05/14/2010 06:18:00 vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one o...

  • Page 542

    Chrysler group llc 11kk74-126-af sixth edition printing in u.S.A..