Jeep WRANGLER 2009 Quick Reference Manual - Vehicle Features
vehicle features
Wiper/WaSher lever:
Front wiPers
intermittent, Low and high operation
• Rotate the end of the lever to the first detent position for one of five
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
washer operation
• Pull the lever toward you and hold for as long as spray is desired.
mist
• Pull down on the lever and release when a single wipe is desired.
rear wiPer
wiper operation
• Rotate the center portion of the lever forward to the first detent for
rear wiper operation.
washer operation
• Rotate the center portion of the lever past the first detent to activate
the rear washer.
Speed ConTrol lever:
crUise on/oFF
• Push the ON/OFF button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the Speed
Control is on.
set
• Press down and release the lever to set a desired speed.
acceL/deceL
• Press and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
canceL
• Pull the lever toward you, push the clutch pedal, or apply the brakes to
cancel the set speed and maintain the set speed memory.
• Press the ON/OFF button to turn the system off and erase the set
speed memory.
resUme
• To resume a previously selected speed, push the lever up and release.
Front Washer
(pull toward
driver)
Front Wipers
rear Wiper/Washer
mist (down)