Jeff rowland d e s i g n g r o u p.
Cadence phono stage owner’s manual.
Introduction w elcome to the jeff rowland design group “family” and congratulations on your purchase of what is unquestionably one of the world’s finest phono preamplifiers. þ with its combination of industrial grade active and passive devices, precision electronic circuitry and accurately machined ...
Product features þ balanced xlr inputs and outputs þ xlr to rca adapters included for unbalanced (rca type) phono interconnect cables. þ ideal matching to all moving coil phono cartridges with four (4) position gain and load switching capability. þ high mass, non-resonant chassis, precision machined...
1 2 4 contents 3.
Initial inspection i nspect the shipping container for damage. If the shipping container, packing material, amplifier or accessories are damaged or missing, notify your dealer and the shipper (if a claim is to be made). Note: many shippers require notification and an inspection within twenty-four (2...
Front panel function controls lo hi lo hi lo-gain amp hi-gain amp load load option select jeff rowland d e s i g n g r o u p c a d e n c e p h o n o s t a g e 2 a 1 3 4.
Front panel function controls b efore attempting any system interconnection, please familiarize yourself with the front panel controls of the cadence phono stage. The descrip- tions below refer to the numbers & letters associated with the features in the diagram above. To properly match your phono c...
Installation / rear panel connection d b b c a a 1.
Installation t he cadence phono stage is normally installed directly on top of its companion preamplifier. Be sure to install the supplied compliant isolation interface supports underneath the phono stage to avoid damage to chassis components and provide maximum mechanical isolation and decoupling f...
Cadence performance specifications overall gain (@ 1 khz) lo-gain 64db hi-gain 74db riaa accuracy ± .03 db, 20 hz to 20 khz frequency response - 3 db @ 0.5 hz and 180 khz common mode rejection ratio 130 db (@ 60 hz) total harmonic distortion (thd) output noise (iec a weighted) lo-gain hi-gain cartri...
I f you have any additional questions regarding installation or operation, please contact your authorized jeff rowland design group dealer..
