JEFF ROWLAND Coherence Owner's Manual - page 4
Product Features
þ
Seven balanced XLR inputs per channel.
þ
Two balanced XLR main outputs per channel.
þ
Two balanced XLR record outputs per channel.
þ
One balanced XLR “bypass” input per channel for use in home theater
installations.
þ
All inputs and outputs can be used with single-ended RCA terminated
interconnects by using XLR/RCA adapters (one male stereo pair and
one female stereo pair supplied).
þ
Independent Listen and Record functions on each input permit
simultaneous listening and recording from any two selected inputs.
þ
Each input can be individually adjusted for R/L balance, mono/stereo,
absolute phase, input impedance, and gain, exclusively independent
of every other input. Individually adjusted input settings are
automatically memorized and recalled when returning to that input.
þ
Built-in “pink noise” generator facilitates break-in of preamplifier
components and interconnected associated components.
þ
Six-function hand-held IR remote control with separate IR sensor/
display unit for remote IR reception and volume level indication.
þ
Chassis and all chassis components precision machined from 6061
aluminum plate provide maximum mechanical resonance control.
þ
All operational functions are under microprocessor control. Within five
milliseconds of any function selected, the microprocessor reverts to a
non-clocking “sleep” mode which eliminates any possibility of digital
noise contamination.
þ
Transformer-coupled inputs and main outputs provide maximum
immunity from RF contamination and system ground loops and enhance
compatibility with a wide variety of interconnected components.
Power Supply Features
þ
Separate power supply provides a stable, low noise DC power source
utilizing reliable, long-life sealed lead-calcium batteries.
þ
Microprocessor controlled charge-management system ensures optimum
battery operation under all conditions. The microprocessor is normally
in non-clocking “sleep” mode, except when servicing a short-term
operational command.
þ
Two separate power supply outputs for powering additional
companion units such as an optional phono equalizer.
þ
Front panel AC/DC mode switch disconnects AC power when DC
mode (pure battery) operation is selected.
þ
Chassis and all chassis components precision machined from 6061
aluminum plate provide maximum mechanical resonance control.
Introduction / Product Features