1. DL manuals
  2. JEI
  3. Drill
  4. MAGBEAST HM40
  5. Safety Instructions

JEI MAGBEAST HM40 Safety Instructions

Summary of MAGBEAST HM40

  • Page 1

    Jei solutions ltd unit 30 newhallhey business park, newhallhey rd, rawtenstall, rossendale, lancashire bb4 6hr tel. +44 1706 229490, fax. +44 1706 830496 www.Jeiuk.Com e-mail: sales@jeisolutions.Co.Uk safety instructions and operators manual for drilling machine m m a a g g b b e e a a s s t t h h m...

  • Page 2: Content

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 2 - content 1. General information ........................................................................................................ - 3 - 2. General safety advice ...............................

  • Page 3: 1. General Information

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 3 - 1. General information portable drilling machines with electromagnetic bases are fast becoming very universal power tools not only at steel fabricating workshops or steel building sites but also ...

  • Page 4: 2. General Safety Advice

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 4 - 2. General safety advice drilling machine must not be used when: 1. The operator has not read the operator’s manual. 2. The work to be done is not in agreement with the recommendations in this 3....

  • Page 5

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 5 - safety chain can also secure the drill through the handle. 6) do not use the machine in explosive environmental areas. 7) do not start work if the machine has excessive play on guide slides. 8) a...

  • Page 6: 3. Standard Equipment

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 6 - 18) in the case that the machine falls on a hard surface, from a height, is wet or is subjected to other unfortunate events that could affect its technical state - work should be terminated immed...

  • Page 7

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 7 - 4. Start up and operation 4.1 cutters and optional equipment features. This drilling machine’s spindle has a weldon shank type socket 3/4” or 19,05 mm and is specifically designed for use with mi...

  • Page 8

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 8 - 4.1.1 installing and uninstalling the arbor the arbor installation and uninstallation should be carried out when the machine is turned off and disconnected from the power grid! Installing the arb...

  • Page 9

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 9 - 4.1.2 installing and uninstalling the milling cutter milling cutter installation and uninstallation should be carried out when the machine is turned off and disconnected from the power grid! Inst...

  • Page 10

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 10 - 4.2 operating instructions the machine is supplied in a metal box. Check if all parts listed in paragraph 3 are included. Steel elements of the drilling machine are protected for transit and sto...

  • Page 11

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 11 - 4.3 before you cut before positioning the machine on the work piece always make sure that: - work piece is made of steel; - thickness of work piece is at least 3/8” (10 mm) - surface of steel un...

  • Page 12

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 12 - bring the cutter gently into contact with the work piece and slowly start to apply pressure on the cutter. Making a hole with a milling cutter should ideally be done in one pass. It makes the cu...

  • Page 13

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 13 - should remember that during the drilling a cooling has to be used in a form of oil emulsion in a titer of 5 -10%. Cooling agent is fed gravitationally from a coolant bottle through an arbor to a...

  • Page 14

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 14 - 4.8 working in difficult areas while working in difficult access areas as well as left-handed operator, the re’s a possibility to change location of the pinion with spoke handles to the other si...

  • Page 15

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 15 - d raw ing 7. D ep en de nce of rota ti on al spe ed on dri lli ng di amet er..

  • Page 16

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 16 - 4.9 installing and uninstalling the cooling system installing the cooling system: a) place the machine in the vertical position, b) slide the drive and the slider (1) up using lever (2), c) cool...

  • Page 17

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 17 - 4.10 cancelling clearance the drive and the slider (1) can be slid up and down smoothly using the lever (3), uncovering strip (2) and the drill body. In order to cancel clearance, the regulation...

  • Page 18: 5. Technical Data

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 18 - 5. Technical data power supply 110-120 v 50/60 hz~ 220-240 v 50/60 hz~ power required 1100 w motor power 1020 w tool holder 3/4” weldon /19,05 mm/ max. Milling cutter diameter 40 mm max. Drillin...

  • Page 19: Hm40

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 19 - 5.1 parameters depending on spindle speed(drilling) relationship between machine speed and cutter diameter the cutter diameter rotary speed [rpm] [inch] [mm] 0,47÷1,38 12÷40 440 relationship bet...

  • Page 20

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 20 - 5.2 replacement of motor brushes: for the magbeast hm40 drill, the state of the carbon brushes should be monitored every 100 working hours. Replacement of motor brushes should take place when th...

  • Page 21

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 21 - 6. Maintenance and service to avoid accidents the drill stand, power cable, wiring, plug connectors, and switches must be regularly inspected for damage. Perform adjustment of the machine play g...

  • Page 22

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 22 - caution: in the case that the machine falls on a hard surface, from a height, is wet or is subjected to other unfortunate events that could affect its technical state - work should be terminated...

  • Page 23: 7. Electrical Diagram

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 23 - 7. Electrical diagram.

  • Page 24

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 24 - 8. Ce declaration of conformity declaration of compatibility we jei solutions ltd unit 30 newhallhey bus park newhallhey rd, rawtenstall rossendale, lancashire bb4 6hr, uk declare with full resp...

  • Page 25: Machine Control Card

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 25 - 9. Machine test certificate machine control card hm40 /120v hm40 /230v serial no. _______________________ date of test: _______________________ electric test results: test result test with sinus...

  • Page 26: 10.  Warranty Card

    Jei solutions ltd magbeast hm40 5.2 (20130122) operators manual for drilling machine magbeast hm40 - 26 - 10. Warranty card warranty card no............. …………………………………………………………….. In the name of manufacturer warrants the drilling machine to be free of defects in material and workmanship under normal...