Jenn-Air 710-0036-LP Manual - Safety Instructions

Manual is about: STAINLESS STEEL BUILT-IN SIDE BURNER

Summary of 710-0036-LP

  • Page 1

    Stainless steel built-in side burner gas grill jenn-air is a trademark of the maytag corporation and is used under license to lowe’s companies, incorporated. Model no.: 710-0036-lp / 710-0037-ng please contact 1-800-554-5799 for assistance do not return to place of purchase for outdoor use only.

  • Page 2

    Table of content xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx section one important warnings … … … … . 1 safety instructions … … … … ... 2-3 placement of the side burner … 3 section two side burner specification … … 4 island construction … … … … ..5 section three lp gas hook-up … … … … … . 6 propane tank a...

  • Page 3: Important Warnings

    For your safety if you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open the top cover or lid. 4. If the odor continues, immediately call your gas supplier or local fire department. For your safety 1. Do not store or use gasoline or other flammable vapors and liquid...

  • Page 4: Safety Instructions

    Safety instructions warning do not try lighting this appliance without first reading the “lighting instructions” section of this manual. Tested in accordance with ansi z21.58b latest standard and cga 1.6b-2002 standard for outdoor cooking gas appliances. This side burner is for outdoor use only. Che...

  • Page 5: Safety Instructions

    When using the side burner, do not touch the cooking grid, burner grate or immediate surroundings as these areas become extremely hot and could cause burns. Use only dry potholders. Moist or damp potholders on hot surfaces may cause steam burns. Do not use a towel or bulky cloth in place of potholde...

  • Page 6: Side Burner Specifications

    Side burner specifications description 710-0036-lp and 710-0037-ng cutout width 14 1/2 in. (36.83 cm) cutout depth 20 in. (50.8 cm) cutout height 9 3/8 in. (23.81 cm) natural gas: standard residential 1/2c in. (1.3 cm) id gas service line. Natural gas hose/regulator assembly included with quick-conn...

  • Page 7: Island Installation

    Island installation island cutout dimensions for jenn-air 710-0036-lp and 710-0037-ng built-in side burners: width 14 1/2 inches (36.83 cm) depth 20 inches (50.8 cm 9 3/8 in .( 23.8 1cm ) 14 1/2 in.(36.83cm) 20 in .(5 0.8 cm ) 12 in.(30.48cm) 5 in.(12.7cm) two 10 sq. In. Openings (minimum). Both end...

  • Page 8: Lp Gas Hook-Up

    Lp gas hook-up only the pressure regulator and hose assembly supplied with the grill should be used. Any replacement pressure regulator and hose assembly must be specified by the grill manufacturer. The 710-0036-lp is a liquid propane configured grill. Do not attempt to use a natural gas supply. Tot...

  • Page 9

    Lp regulator and propane tank assembly 1. Attach the regulator to the propane tank by turning the regulator handle clockwise. 2. Turn off the lp supply at the cylinder when the side burner is not in use. O p e n c lo s e g 9 3 /8 in .( 2 3 .81c m) 14 1/2 in.(36.83cm) 20 in .(5 0.8 cm ) 12 in.(30.48c...

  • Page 10

    Natural gas hook-up xxxxxxxxxxxxxxxxxxxxxxxx only the pressure regulator and hose assembly supplied with the grill should be used. Any replacement pressure regulator and hose assembly must be specified by the grill manufacturer. The installation of this appliance must conform with the local codes or...

  • Page 11

    Installation of natural gas regulator 1. The natural gas regulator has been factory installed. Attach the pvc gas hose to the regulator (see drawing below). 2. Adjust the brass elbow so that it is pointing down. 3. Connect the other end of the pvc gas hose to the house gas line using the quick-conne...

  • Page 12

    Leak testing xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx general although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check must be performed at the installation site. Periodically check the whole system for leaks following the procedures listed...

  • Page 13: Installer Final Check

    Installer final check specified clearance maintained 18” from combustible materials. All internal packaging has been removed. The gas supply shut off valve has been located. Model 710-0036-lp the hose and regulator are properly connected. The unit has been tested and is free of leaks. Warning 1. Do ...

  • Page 14: Operating Instructions

    12 using the side burner cooking requires high heat for searing and proper browning. Most foods are cooked at a “hi” heat setting for their entire cooking time. To begin: 1. Make sure the side burner has been leak tested and is properly located. 2. Remove remaining packing materials. 3. Light the gr...

  • Page 15: Lighting Instructions

    13 lighting instructions before lighting… inspect the gas supply piping prior to turning the gas “on”. If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use. Warning do not use the side burner if gas odor is present. Contact customer service at 1-800-554-5799. Leak check ...

  • Page 16: Lighting Illustrations

    Lighting illustrations 1.Open lid 2. Press and turn the side burner knobs to the “hi” setting. 3. Several attempts may be required to light the burner. Please adjust the knob to the desired temperature setting. 14.

  • Page 17

    Match lighting the side burner if the side burner will not light after several attempts using the control knobs, the burner may be lit with a match. 1. If you have already attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate. 2. Insert a lit extended m...

  • Page 18: Care & Maintenance

    Care & maintenance stainless steel the side burner is made from non-rusting and non- magnetic stainless steel. There are many different stainless steel cleaners available. Always use the mildest cleaning procedure first, scrubbing in the direction of the grain. To touch up noticeable scratches in th...

  • Page 19: Troubleshooting

    Troubleshooting when to look for spiders you should inspect the burners twice a year or immediately after any of the following conditions occur: 1. The smell of gas in conjunction with the burner flames appearing yellow. 2. The grill does not reach temperature. 3. The grill heats unevenly. 4. The bu...

  • Page 20

    Exploded view for 710-0036-lp 01 02 03 04 05 19 06 08 09 12 14 15 16 20 18 17 11 10 13 07 21 18.

  • Page 21

    19 model 710-0036-lp parts list ref# description q’ty ref# description qty 1 lid, side burner 1 12 manifold 1 2 cooking grid, side burner 1 13 lighting rod 1 3 side burner head 1 14 control panel 1 4 side burner ring 1 15 control knob seat 1 5 side burner base 1 16 control knob 1 6 hose clamp 1 17 m...

  • Page 22

    Exploded view for 710-0037-ng 01 02 03 04 05 19 06 07 12 14 15 16 20 18 17 09 11 10 08 13 21 20

  • Page 23

    21 model 710-0037-ng parts list ref# description q’ty ref# description qty 1 lid, side burner 1 12 manifold 1 2 cooking grid, side burner 1 13 lighting rod 1 3 side burner head 1 14 control panel 1 4 side burner ring 1 15 control knob seat 1 5 side burner base 1 16 control knob 1 6 bowl assembly, si...

  • Page 24: Limited Warranty

    Limited warranty model # 710-0036-lp / 710-0037-ng stainless steel build-in outdoor gas side burner nexgrill industries, inc.Warrants to the original consumer/purchaser of each jenn-air outdoor gas side burner that when subject to normal residential use, it is free from defects in workmanship and ma...