Jenn-Air JEC8430BD Planning Dimensions - page 2
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JENN-AIR
®
DETAILED PLANNING DIMENSIONS
2 of 4
JRC120041A 07/2012
30" ELECTRIC RADIANT COOkTOP
JEC8430BD – 29
7
⁄
8
" x 4
1
⁄
8
" x 21
1
⁄
2
"
MODEL #
JEC8430BD
in
cm
A
Width of combustible area above
cooking surface (min.)
30
76.2
B
Width from cooktop to fixed wall
or other combustible material (min.)
0
0.0
C
Recommended width to outer edge of outlet
10
25.4
D*
Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.)
30
76.2
E
Height to bottom of uncovered wood
or metal cabinet (min.)
18
45.7
F
Recommended height to top edge of outlet
12
30.5
G
Depth of upper cabinet
13
33.0
H
Depth from cutout to wall (min.)
3
⁄
4
1.9
I
Width of cutout
29
1
⁄
8
74.0
J
Depth of cutout
20
3
⁄
8
51.9
K
Depth from cutout to front of countertop
2
1
⁄
8
5.4
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than
1
⁄
4
" (0.6 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop, follow the
hood or microwave hood combination instructions for dimensional clearances above
the cooking surface.
ELECTRICAL REQUIREMENTS
240 volt, 60 Hz, 40-amp fused, grounded circuit is required. A dedicated circuit
is recommended. 48" (121.9 cm) of
1
⁄
2
" (1.3 cm) I.D. flexible cable is provided.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout.
• If cabinet has a drawer, allow a 4
1
⁄
2
" (11.4 cm) minimum clearance between
countertop and top of drawer.
COOKTOp OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
• For approved model number combinations, refer to the under counter
label on the bottom of the cooktop burner box.
• To install a cooktop over a single wall oven, refer to page 3.
OPENING/CLEARANCE DIMENSIONS
TOp VIEW – CUTOUT
FRONT VIEW
SIDE VIEW
D*
G
E
A
B
B
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
I**
K
J**
E
C
e
B
B
H
F
H
Side
Cabinet
A
D*
G
I**
K
J**
E
C
e
B
B
H
F
H
Side
Cabinet
A