Jenn-Air JMC7000 Manual - Using The Cooktop Light
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
17
S p e c i a l F e a t u r e s
Using the Cooktop Light
The three pads on the bottom right of the control panel
control the cooktop light.
1. Choose light.
◆
Touch ON Pad or NIGHT Pad.
2. Turn off light when desired.
◆
Touch OFF Pad.
To Set Light to be on for a Specific Time:
1. Turn on light by touching ON Pad or NIGHT Pad.
2. Program “ON” time.
◆
Touch the TIMER Pad and hold for 3 seconds.
Display will show “LIGHT”.
3. Enter desired time.
4. Touch the START Pad.
To Cancel Timer:
◆
Touch CANCEL/OFF Pad twice.
Using the Vent Fan
The three pads on the bottom left of the control panel con-
trol the 2-speed FAN.
1. Choose fan speed.
◆
Touch HI Pad or LO Pad.
2. Turn off fan when desired.
◆
Touch OFF Pad.
To Set Fan to Run for a Specific Time:
1. Start fan by touching HI Pad or LO Pad.
2. Program run time.
◆
Touch the TIMER Pad and hold for 3 seconds.
Display will show “FAN”.
3. Enter desired time.
4. Touch the START Pad.
To Cancel Timer:
◆
Touch CANCEL/OFF pad twice.
◆
If the temperature gets too hot around the microwave
oven, the exhaust fan in the vent hood will automati-
cally turn on the LO setting to protect the oven. It may
stay on up to an hour to cool the oven. When this
occurs, the FAN OFF pad will not turn the fan off.
◆
If both the fan and light are operating and the TIMER
Pad is touched and held, both the fan and light will be
controlled by the timer. The display will alternate
between “FAN” and “LIGHT” one time.
◆
Canceling the timer will cause the timer to shut off;
however, canceling the timer will not cancel the fan.
The fan will continue to operate until turned off.
◆
If both the fan and light are operating and the TIMER
Pad is touched and held, both the fan and light will be
controlled by the timer. The display will alternate
between “FAN” and “LIGHT” one time.
◆
Canceling the timer will cause the timer to shut off;
however, canceling the timer will not cancel the light.
The light will continue to operate until turned off.
Note . . .
Note . . .
Note . . .
Note . . .