K-9 Lights Bulldog User Manual - page 9
www.k9lights.com
9
Press ENTER to access further menu settings or press enter to save the current setting.
For example, if you want to choose DMX mode A001, select as follows:
Press MENU, go back to the initial setting
Press UP / DOWN until “Addr” appears
Press ENTER to select (the display will
flash)
Press UP / DOWN to change the address code to
select
A001
Press ENTER to select and store the current menu options. DMX mode will
be stored automatically and the screen will stop flashing
.
3. Details of fixture presets Pr- -
Press MENU, go back to the initial setting
Press UP / DOWN until “Pr--“ appears
Press ENTER to choose, the display will flash
Press UP / DOWN to change the program code to select pr00
Press ENTER to select and store the current menu options. DMX mode
will be stored automatically and the screen will stop flashing.
Program Options:
Pr00:red;
Pr01:green
Pr02:blue
Pr03:amber
Pr04:cyan Pr05:purple
Pr06:white;
Pr07:red+strobe;
Pr08:green+strobe Pr09:blue+strobe; Pr10:amber+strobe; Pr11:cyan+strobe
Pr12:purple+strobe;
Pr13:white+strobe;
Pr14:RGB jumping change; Pr15: 7 colors continuously changing;
Note Pr7--- Pr15 Changes the content Of SP adjust the speed of continuous color
changes. SP00 is the fastest SP15 is the slowest
Master/Slave