K-array KA10 User Manual - page 8
- 2 Rack adapters
- 2 xlr Neutrik cable mt. 0,5
- 1 Lan cable, 8 poles cat5
- 1 adjustment pen screwdriver
- 1 software and utilities CD
- 1 User's manual
KA 10 operates safely and without audio discontinuity if the AC voltage stays within either of two operating
windows: 95-125 (voltage selector on 115 V) or 195-250 V (voltage selector on 230 V), at 50 or 60 Hz.
115-230
The device is default set to be connected to 230 V AC Power. To use the device on a 115 V AC Power you
need, before connecting it, to move
, just loosening the two screws, and to choose
the correct use voltage by the red switch. Be sure that both voltage set on the selector and AC Power have the
same value . Always close the voltage selector's cover before connecting the device to AC Power. Change
the label that points out the correct voltage in use.
the voltage selector's cover
CH1 OUT
CH2 OUT
CH2 +
CH1 +
CH2 +
CH2 -
CH1 -
CH2 -
2+
2+
1+
1+
2-
2-
1-
1-
Speakon connector
Speakon connector
CH1 in
CH1
hot
3
2
1
XLR connector
CH1
grd
CH1
cold
CH1
hot
3
1
2
CH1
grd
CH1
cold
CH1 out
CH2 in
CH2
hot
3
2
1
XLR connector
CH2
grd
CH2
cold
CH2
hot
3
1
2
CH2
grd
CH2
cold
CH2 out
Connecting a 115V system on a 230V AC Power causes heavy
damages to the device and serious risk for users .
CAUTION
!
!
7. INCLUDED ACCESSORIES
8. WIRING
9. REQUIRED VOLTAGE
8