Summary of KU210
Page 1
Ku210 ver. 1.2 ku210 user guide english.
Page 2
Ku210 ver. 1.2 2 table of contents symbols ................................................................................ 3 1. Introduction ..................................................................... 4 2. Key features .........................................................................
Page 3
Ku210 ver. 1.2 3 this symbol alerts the user to the presence of recommendations about product’s use and maintenance. This symbol alerts the user to the presence of recommendations about the product’s use and maintenance. K-array declares that this device is in compliance with applicable ce standards...
Page 4
Ku210 ver. 1.2 4 1. Introduction 2. Key features 3. Applications the ku210 is an ultra thin, high performance passive subwoofer designed to be the perfect companion to any of the k-array installed sound series. A combination of extended frequency response with prodigious output and a virtually invis...
Page 5
Ku210 ver. 1.2 5 read these instructions - keep these instructions - heed all warnings 5. Safety information warning. Failure to follow these safety instructions could result in injury or damage to the device or other property. Important safety instructions • read these instructions. • keep this ins...
Page 6
292,5mm 11,5in 282mm 11,1in 62,8mm 2,5in 40mm 1,6in 21mm 0,8in 130,5mm 5,1in 21mm 0,8in 221mm 8,7in 21mm 0,8in 374,4mm 14,7in 141mm 5,6in 304,5mm 12,0in 121,8mm 4,8in 149,6mm 5,9in 500mm 19,7in ku210 ver. 1.2 6 6. Unpacking each k-array speaker is built to the highest standard and thoroughly inspect...
Page 7
Ku210 ver. 1.2 7 7.1 mounting screw holes for accessories mounting screw holes for wall brackets mounting screw holes for k-joint2.
Page 8
4 Ω 16 Ω ku210 ver. 1.2 8 8. Wiring the ku210 is comprised of a neodymium transducer, combined with a 10” passive transducer. The neodymium transducer features a double voice-coil (8 Ω + 8Ω). T the two voice coils can be wired in parallel (resulting in a 4 Ω total impedance) or in serial (resulting ...
Page 9
Ku210 ver. 1.2 9 8.1 k-2spk accessory this accessory is used to connect a speakon cable to a ku210. It features two speakon connectors wired in parallel giving you the possibility to wire two or more ku210s in parallel using only speakon cables. The two wires situated at the back of the k-2spk carry...
Page 10
Ku210 ver. 1.2 10 9. Set up 9.1 rubber feet mounting ku210 can be positioned on a flat surface both in horizontal and in vertical position thanks to the four rubber feet included. Ku210 in horizontal position on a flat surface ku210 in vertical position on a flat surface.
Page 11
Ku210 ver. 1.2 11 9.2 hanging on the wall thge ku210 can be mounted on the wall with the k-wall2 accessory (not included). K-wall2 accessory.
Page 12
Ku210 ver. 1.2 12 10. Service to obtain service: 1) contact the official k-array distributor in your country. Your local distributor will direct you to the appropriate service center. 2) if you are calling for service, please have the serial number(s) of the unit(s) available for reference. Ask for ...
Page 13
Ku210 ver. 1.2 13 11. Technical specifications acoustics power handling 2 x 160 w impedance 4 / 16 Ω selectable (2 x 8 Ω) frequency range (-10 db) 40 hz – 300 hz (1) spl 1w/1mt 94 db (2) maximum spl 121 db (cont.) – 127 db (peak) (3) coverage horizontal omni vertical omni crossover type external cro...
Page 14
Ku210 ver. 1.2 14 12. Certification k-array s.R.L. A socio unico società soggetta alla attività di direzione e coordinamento di hp sound equipment spa p. Iva / vat / cf 06206990480 - r.E.A. 609589 cap. Soc. I.V. € 100.000,00 sede legale: via paolina romagnoli 50038 scarperia e san piero - firenze - ...