Summary of Redline KF12MT
Page 1
Rev. A kf12mt user’s guide english.
Page 2
Kf12mt rev. A 2.
Page 3
Kf12mt rev. A 3 contents symbols 5 1. Introduction 7 2. Applications 7 3. Key features 7 4. Unpacking 8 5. Safety 8 6. Physical 10 7. Amplifier 11 7.1 ac power connector 11 7.2 voltage requirement 11 7.3 current requirement 11 7.4 rear panel 12 7.5 touch screen functions 14 7.6 audio input connector...
Page 4
Kf12mt rev. A 4.
Page 5
Kf12mt rev. A 5 this symbol alerts the user to the presence of recommendations about product’s use and maintenance. This symbol alerts the user to the presence of recommendations about the product’s use and maintenance. K-array declares that this device is in compliance with applicable ce standards ...
Page 6
Kf12mt rev. A 6.
Page 7
Kf12mt rev. A 7 1. Introduction the kf12mt and the kf12p are k-array’s newest multi-task additions to its portfolio of professional, high-quality loudspeakers in the redline series. The kf12mt is a 12” coaxial full range multi-purpose powered speaker and is the successor to the long serving kf12 mod...
Page 8
Kf12mt rev. A 8 4. Unpacking each k-array loudspeaker is built to the highest standard and thoroughly inspected before leaving the factory. Upon arrival, carefully in- spect the shipping carton, then examine and test your new loudspeaker. If you find any damage, immediately notify the shipping compa...
Page 9
Kf12mt rev. A 9 the device should be placed so that its location does not interfere with its proper cooling. For example, the device shouldn’t be placed on beds, carpets or similar surfaces that could create an obstacle for the ventilation openings. To reduce the risk of electric shock, unplug the p...
Page 10
Kf12mt rev. A 10 6. Physical 20,55in 522mm 15,37in 390,4mm 10,28in 261mm 10,28in 261mm flange 36 (1.42'') 1,42in 36mm 9,06in 230mm 4,42in 112,3mm 0,91in 23mm 8,91in 226,3mm 5,47in 139mm 14,38in 365,3mm 7,5° fixing points m8 fixing points m8 9,06in 230mm 0,91in 23mm 4,42in 112,3mm 54° fixing points m...
Page 11
Kf12mt rev. A 11 7. Amplifier 7.1 ac power connector 7.2 voltage requirement 7.3 current requirement the amplifier module and any audio equipment connected to it (mixing consoles, processors, etc.) must be properly connected to the ac power distribution, preserving ac line polarity. All grounding po...
Page 12
Kf12mt rev. A 12 7.4 rear panel 1 2 3 4 5 12 13 14 15 16 17 18 19 20 6 7 10 11 9 8.
Page 13
Rs485 xlr link usb connection from a pc rs485 xlr link rs485 xlr link rs485 xlr link kf12mt rev. A 13 1) ch1 line input. Xlr line level input with +4 dbu sensitivity. 2) ch2 mic/line input. Xlr input, with selectable sensitivity for mic (-30 dbu) or line (+4 dbu). 3) ch1 parallel line out. Xlr paral...
Page 14
Kf12mt rev. A 14 the output page allows users to independently control the amplitude of the signal routed to the subwoofer, the speaker output and the xlr dsp output. Two preset pages allow users to load presets stored on-board. The arrow buttons on the top right corner of the screen provide access ...
Page 15
Kf12mt rev. A 15 7.6 audio input connector wiring the audio section includes parallel link, which allows users to distribute an audio signal to multiple units. Up to 30 different modules can be connected in parallel on the same balanced line (with a source output impedance of 600 ohm). Ch 1 line inp...
Page 16
Kf12mt rev. A 16 8. K-framework 8.1 system requirements 8.2 where to get the most updated software system requirements: operating system: windows xp / vista / 7 cpu: intel pentium dual core memory: 2 gb required components: microsoft .Net framework 4 microsoft visual c++ 2010 redistributable package...
Page 17
Kf12mt rev. A 17 a.C. A.C. Powered output powered output ch. 1 ch. 1 ch. 1 kf12mt kf12mt + + kf12mt kmt18p kf12mt kf12p kf12p ch. 2 you can use either two input channels or only one input channel. If you use two channels you can also route two different signals to the speakers. The stand-alone use i...
Page 18
Kf12mt rev. A 18 a.C. A.C. A.C. Powered output powered output ch. 1 ch. 1 kf12mt kf12mt kf12mt kf12p ch. 2 ch. 1 l l r r if you need a bass reinforcement, you can use two active kf12mts for both you p.A. Sides(l+r), feeding a different subwoofer from each 1000 w powered output channel. The shape of ...
Page 19
Kf12mt rev. A 19 10. Accessories the kf12mt and the kf12p are compatible with a variety of accessories which can be ordered from k-array’s sales support office, sales@k-array.Com. K-f12wall wall bracket to install one kf12p or kf12mt for vertical and horizontal configurations to satisfy many differe...
Page 20
Kf12mt rev. A 20 11. Service to obtain service: 1) contact the official k-array distributor in your country. Your local distributor will direct you to the appropriate service center. 2) if you are calling for service, please have the serial number(s) of the unit(s) available for reference. Ask for c...
Page 21
Kf12mt rev. A 21 12. Specifications acoustics speaker power handling 800 + 200 w (aes) frequency range (-10 db) 55 – 19 khz (1) spl 1w/1mt 99 db maximum spl 127 db (cont.) – 133 db (peak) (2) coverage horizontal 70° vertical 70° crossover type internal passive crossover transducers coaxial transduce...
Page 22
Kf12mt rev. A 22.
Page 23
Kf12mt rev. A 23 13. Declaration of conformity.
Page 24
Kf12mt rev. A 24 the contents of this manual are furnished for informational purposes only. K-array s.U.R.L. Assumes no responsibility for any errors or inaccuracies that may appear in this manual. K-array s.U.R.L. Reserves the right to make modifications without prior notice..
Page 25
K-array s.R.L. Unipersonale via paolina romagnoli - 50037 san piero a sieve (firenze) - italy tel. +39 055 8487222 - fax. +39 0558487238 e-mail: info@k-array.Com www.K-array.Com umc053ab01en.