Industrial power tools 22mm sds rotary hammer model edh620vres • 620w motor • impact energy of 2.2 joules • push lock bit receptor for fast bit installation • variable speed and reverse • two mode action - rotary and hammer drilling • safety clutch • efficient dust and grease seal design • carrying ...
1 general safety rules warning! Read all instructions failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) p...
2 optional accessories (sold separately) 1. Drilling anchor holes (rotation + hammering) 䡬 drill bit (slender shaft) 䡬 drill bit (taper shank) and taper shank adapter drill bit (slender shaft) outer diameter effective length overall length 3.4 mm 45 mm 90 mm 3.5 mm specifications voltage (by areas)*...
3 ( ) straight shank bit for impact drill 䡬 13 mm rotary hammer chuck for drilling operations when using a straight shank bit for impact drilling with a rotary hammer. 13 mm rotary hammer chuck (sds-plus shank) chuck wrench 䡬 anchor setting adapter (for manual hammer) anchor setting adapter (for man...
4 4. Crushing operation (rotation + hammering) bull point (round type only) (sds-plus shank) 5. Bolt placing operation with chemical anchor. (rotation + hammering) (sds-plus shank) 12.7 mm chemical anchor adapter 19 mm chemical anchor adapter standard socket on the market 6. Drilling holes and drivi...
5 7. Drilling holes (rotation only) chuck adapter (d) (sds-plus shank) chuck wrench 䡬 13 mm drill chuck ass’y (includes chuck wrench) and chuck (for drilling in steel or wood). 8. Driving screws (rotation only) chuck adapter (d) (sds-plus shank) bit no. Screw size length no. 2 3 – 5 mm 25 mm no. 3 6...
6 applications rotation and hammering function 䡬 drilling anchor holes 䡬 drilling holes in concrete 䡬 drilling holes in tile rotation only function 䡬 drilling in steel or wood (with optional accessories) 䡬 tightening machine screws, wood screws (with optional accessories) prior to operation 1. Power...
7 caution 䡬 the dust cup and dust collector (b) are for exclusive use of concrete drilling work. Do not use them for wood or metal drilling work. 䡬 insert dust collector (b) completely into the chuck part of the main unit. 䡬 when turning the rotary hammer on while dust collector (b) is detached from...
8 to drill wood or metal material using the drill chuck and chuck adapter (optional accessories), proceed as follows. Installing drill chuck and chuck adapter: (fig. 9) fig. 9 (1) attach the drill chuck to the chuck adapter. (2) the part of the sds-plus shank is the same as the drill bit. Therefore,...
9 (3) turn the switch on, and drill a hole in prescribed depth. (4) to remove the drill bit (taper shank), insert the cotter into the slot of the taper shank adapter and strike the head of the cotter with a hammer supporting on a rests (fig. 13). Fig. 13 how to use the core bit (for light load) when...
10 lubrication low viscosity grease is applied to this rotary hammer so that it can be used for a long period without replacing the grease. Please contact the nearest service center for grease replacement when any grease is leaking form loosened screw. Further use of the rotary hammer with lock off ...
11.
12 item part name q'ty no. 1 front cap 1 2 stopper ring 1 3 grip 1 4 ball holder 1 5 holder plate 1 6 holder spring 1 7 washer (b) 1 8 retaining ring for d20 shaft 1 9 tapping screw (w/flange) d5 × 35 4 10 gear cover 1 11 hitachi label (a) 1 12 pushing button 1 13 pushing spring 1 14 change lever 1 ...
13.
14.
608 code no. C99155411 printed in china ec declaration of conformity we declare under our sole responsibility that this product is in conformity with standards or standardized documents en60745, en55014 and en61000-3 in accordance with council directives 73/23/eec, 89/336/eec and 98/37/ec. Manufactu...
