Industrial power tools impact drill model edh720re2 warning: the safety information given inside must be read and understood by any person using, installing, repairing or maintaining these tools. • powerful and low noise level motor • 20mm capacity in concrete • easy one touch change-over from rotat...
1 general safety rules warning! Read all instructions failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) p...
2 2. Power switch ensure that the power switch is in the off position. If the plug is connected to a receptacle while the power switch is in the on position, the power tool will start operating immediately, inviting serious accident. 3. Extension cord when the work area is removed from the power sou...
3 for keyless chuck (fig. 3, 4) (1) mounting the bit turn the lock collar in the direction “auf . Release” and open the chuck. After inserting the drill bit into the chuck as far it will go, turn the lock collar in the “grip . Zu” direction. Grip the retaining ring and close the chuck by turning the...
4 caution do not use the impact dril in the impact mode if the material can be bored by rotation only. Such action will not only reduce drill afficiency, but may also damage the drill tip. When changing over, ensure the change knob is slide as far as it will go. 9. High-spped/low-speed changeover to...
5 important correct connection of the plug the wires of the mains lead are coloured in accordance with the following code: blue:- neutral brown:- live as the colours of the wires in the mains lead of this tool may not correspond with the coloured markings identifying the terminals in your plug proce...
6 1 2 3 3 4 7 10 17 18 24 25 27 30 31 32 33 34 35 36 37 38 39 501 502 503 5 6 7 8 9 5 11 12 13 14 15 16 19 20 21 28 29 22 23 26 item no. Part name q’ty 1 flat hd. Screw (a) (left hand) m6 × 25 1 2 chuck wrench for 13vlb-d,13vlr-d 1 3-1 drill chuck 13vlrb-d (includ.2) 1 3-2 drill chuck 13vlre-n (w/o ...
701 code no. C99160711 printed in china ec declaration of conformity we declare under our sole responsibility that this product is in conformity with standards or standardized documents en60745, en55014 and en61000-3 in accordance with council directives 73/23/eec, 89/336/eec and 98/37/ec. Manufactu...
