K&F PASSIO User Manual - page 8
User's manual
K&F Mounting Bracket PASSIO
KLING & FREITAG GMBH © 2014
Version 2.1
Page 8 of 13
Before permanently fixing the device, check if it has the optimal position.
1.
Place the speaker on a stable support.
2.
Check the position in which the Mounting Bracket is best suitable for the later alignment
of the PASSIO-Lautsprecher.
3.
Mount the Mounting Bracket (POS.1) with four appropriate screws and wall anchors to
the wall.
4.
Put the bolt (POS.2) through the washer (POS.3) and then through the mounting plate of
the Mounting Bracket.
5.
Warning
It is mandatory that you insert the Neoprenscheibe as described. Without the
Neoprenscheibe you will not be able to fasten the PASSIO-Lautsprecher sufficiently.
Furthermore, a missing Neoprenscheibe can lead to damages on the enclosure. This
affects the security of the mounted speaker.
Place the Neoprenscheibe (POS.4) over the bolt, mount the speaker to it and tighten the
M10 bolt.
6.
We recommend that you always secure the speaker with a secondary safety device
against falling down (safety rope).
7.
Adjust the speaker and lock it in place on the Mounting Bracket using the two set screws
(3mm hexagon socket) (POS.5).
8.
Check if the PASSIO-Lautsprecher is mounted securly to the wall or the ceiling.