- DL manuals
- K&F
- Stereo System
- Sona 5
- User Manual
K&F Sona 5 User Manual
Summary of Sona 5
Page 1
K&f sona 5 important information, please read before use! Kling & freitag gmbh junkersstraße 14 d-30179 hannover phone +49 (0) 511 96 99 70 fax +49 (0) 511 67 37 94 www.Kling-freitag.De user's manual version 3.1 released: 05.04.2012.
Page 3
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 3 of 20 table of contents 1 introduction 5 1.1 symbols in user's manual 5 1.2 information about this user's manual 5 2 product description 6 2.1 scope of delivery 6 2.2 overview of components 6 2.3 accessories 6 2.4 required tool...
Page 4
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 4 of 20
Page 5
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 5 of 20 1. Introduction thank you for your decision to buy a kling & freitag product. To guarantee a trouble-free operat- ing of the equipment and to allow your kling & freitag sona 5 system to achieve its full potential please r...
Page 6
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 6 of 20 2. Product description 2.1 scope of delivery • loudspeaker with integrated ball joint mounting arm m (56mm) for wall, ceiling or stand mountings • user's manual • loudspeakers with option 'phoenix connector' or '100 volt'...
Page 7
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 7 of 20 2.4 required tools • 2.5 mm hexagon socket wrench • 19 mm jaw spanner • mounting accessories for installation on walls or ceilings 3. Safety instructions 3.1 mounting the speakers / wall and ceiling installation warning t...
Page 8
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 8 of 20 3.2 notes for mounting the speakers caution mount the speakers securely. To avoid injury or damage, always be sure to mount the speakers se- curely so that they do not fall. Please note that speakers can move as a result ...
Page 9
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 9 of 20 3.4 protecting the speakers / operating safety in general, audio signals must not be overdriven. This may be caused by mixing consoles, equalizers, effect equipment, etc. And should be indicated on this equipment. When a ...
Page 10
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 10 of 20 4. Wall and ceiling installation screw the mounting plate (a) through all 4 mounting holes onto the wall or ceiling. Choose fasteners that are suitable for the wall or ceiling material. After installation, the mounting p...
Page 11
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 11 of 20 screw the retainer nut (a) onto thread reducer (b) using a 19 mm jaw spanner. While doing this, align the mounting arm. Now align the loudspeaker arm as desired, and then retighten the hexagon socket screws that you prev...
Page 12
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 12 of 20 5. Stand installation the retainer nut of the mounting arm is equipped with a 5/8" thread into which a reducer with an in- ner thread of m10 is screwed. You can exchange this thread reducer for a commercially available r...
Page 13
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 13 of 20 7. Operation with or without a controller operation without a controller the sona 5 system is designed so that it can be operated passively without a controller directly on a power amplifier. Follow the instructions in c...
Page 14
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 14 of 20 8.3 wiring instructions • before connecting your sona 5 loudspeaker switch off all equipment and turn down all level controls. • only use high-quality speaker cables with a sufficient wire gauge. The wire gauge depends o...
Page 15
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 15 of 20 10. Operating the speakers • switch off all equipment and turn down all level controls of the mixing console and the power amplifiers. • wire your sona 5 systems according to the instructions in this manual. • switch on ...
Page 16
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 16 of 20 11. Technical specifications design passive 2-way bassreflex system frequency range -10 db 80 hz - 23 khz frequency range +/- 3 db 110 hz - 22 khz coverage angles nominal 120° x 90° (hor. X vert.) power handling 100 watt...
Page 17
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 17 of 20 13. Dimensions 13.1 with mounting arm m (56mm) – (included in delivery) 140,3 mm / 5,524" 230 mm / 9,055" 170 mm / 6,693" 56 mm / 2,218" 2,5 mm / 0,098" 120 mm / 4,724" 262,7 mm / 10,343" 34° 277,1 mm / 10,908" 60 mm / 2...
Page 18
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 18 of 20 13.2 with mounting arm s (32mm) – (accessory) 32 mm / 1,261" 202 mm / 7,954" 200 mm / 7,865" 173,6 mm / 6,834" 45 ° 19° 230 mm / 9,052" 266,5 mm / 10,491".
Page 19
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 19 of 20 13.3 with mounting arm l (109mm) – (accessory) 203 mm / 7,998" 212 mm / 8,347" 90 ° 90 ° 242,7 mm / 9,554" 212 mm / 8,346" 279 mm / 10,980" 109 mm / 4,288" 62,7 mm / 2,469" 9,9 mm / 0,390".
Page 20
User's manual k&f sona 5 kling & freitag gmbh © 2012 revision 3.1 page 20 of 20 14. Disposal 14.1 regulations for disposal 14.1.1 germany it is not allowed to dispose of used electrical equipment as domestic waste. Dispose of the device at public collection points for recycling! The device is a so c...