- DL manuals
- K&F
- Subwoofer
- SONA SUB II
- Operating Instructions Manual
K&F SONA SUB II Operating Instructions Manual
Summary of SONA SUB II
Page 1
K&f sona sub ii important information, please read before use! Kling & freitag gmbh junkersstraße 14 d-30179 hannover tel +49 (0) 511 96 99 70 fax +49 (0) 511 67 37 94 www.Kling-freitag.De operating instructions translation of the original instructions version 1.5 released: 18.10.2016.
Page 3
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 3 of 21 table of contents 1 introduction 4 1.1 icons used 4 1.2 about these operating instructions 4 2 product description 5 2.1 items included 5 2.2 components 5 2.3 required signal processor 6 3 safety instructions...
Page 4
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 4 of 21 1. Introduction thank you for purchasing a kling & freitag product. To guarantee a trouble-free operating of the equipment and to allow your kling & freitag sona sub ii system to achieve its full potential re...
Page 5
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 5 of 21 2. Product description the subwoofer sona sub ii is the ideal bass supplement for k&f sona speakers. With its discreet appearance, it fits in nearly any architecture. The practical mounting points with a doub...
Page 6
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 6 of 21 2.3 required signal processor the following information does not apply to the option "xo" : when using the sona sub ii, a signal processor is required such as an electronic crossover or the k&f controller cd ...
Page 7
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 7 of 21 3.3 preventing hearing damage caution keep your distance from operating speakers. This equipment is capable of delivering sound pressure levels in excess of 90 db spl, which may cause permanent hearing damage...
Page 8
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 8 of 21 avoid damage caused by the speakers' magnetic fields speakers are permanently surrounded by a magnetic field, even when they are not connected. Therefore, during transport and placement of the speakers, it is...
Page 9
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 9 of 21 4. Correct ratio between top and subwoofer for a balanced sound reproduction, suitable for speech and average music material, one subwoofer sona sub ii can be combined with up to 4 tops sona 5. This is valid ...
Page 10
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 10 of 21 5. Configuration and connecting diagram 5.1 terminal assignment in 1 in 2 { { • without the option "xo" the second phoenix output is parallel to the first phoenix output. • at the "xo" option the second phoe...
Page 11
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 11 of 21 5.2 sona sub ii with sona top and systemrack connection diagram k&f systemrack mono mix stereo sona sub ii + + - - + + - - sona 6 sona 6 stereo + - + - + + - - + + - - sona 5 sona 5 sona 5 sona 5 stereo + + ...
Page 12
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 12 of 21 5.3 sona sub ii with sona top, unfiltered connection diagram mono mix stereo signal processor amplifier sona sub ii amplifier signal processor + + - - + + - - sona 6 sona 6 stereo + - + - + + - - + + - - son...
Page 13
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 13 of 21 5.4 sona sub ii "xo" with sona top connection sona 5 or sona 6 stereo sona sub ii amplifier option "xo" stereo stereo + + - - + + - - sona 6 sona 6 + - + - + + - - + + - - sona 5 sona 5 sona 5 sona 5 stereo ...
Page 14
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 14 of 21 6. Wiring warning speaker-signal currents are potentially hazardous to the human body. When the system is in use, make sure that the connectors are secured against inadvertent touch. When using the phoenix c...
Page 15
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 15 of 21 • switch on the mixing console first, then the controller and the power amplifier. Always use the before mentioned switching order. Otherwise switching noises may damage the sound system. • if there is inter...
Page 16
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 16 of 21 8. Technical specifications concept bass reflex system (operations via k&f systemrack) frequency range without filter (+/-3 db/-10 db) 70 hz - 400 hz 60 hz - 450 hz frequency range with filter (-3 db/-10 db)...
Page 17
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 17 of 21 9. Measuring diagrams 0 0 1 0 2 1000 70 80 90 100 frequency response frequency response option xo frequency (hz) sp l ( d b ) 0 10 20 30 40 50 60 70 80 impedance im pedan c e ( o h m ).
Page 18
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 18 of 21 10. Dimensions weight: 16.9 kg 536,0 mm / 21,102" 308,0 mm / 12,126" 485,0 mm / 19,094" 485,0 mm / 19,094".
Page 19
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 19 of 21 11. Disposal please recycle the packaging material of the device. 11.1 germany don’t dispose of waste electrical equipment through household waste. Don’t deliver it to official recycling points either. All k...
Page 20
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 20 of 21 12. Ec declaration of conformity applicable to all products designated hereafter and distributed by kling & freitag gmbh including model variants unless these products have been altered afterwards. Loudspeak...
Page 21
Operating instructions k&f sona sub ii kling & freitag gmbh © 2016 version 1.5 page 21 of 21 (managing director / ceo).