O n y x input presence two-rock two-rock owner's manual.
Page 1 thank you for your purchase of a two-rock amplifier from k&m analog designs, llc. As a discerning guitarist, you know the road to great tone begins with great components. Our classic design, carefully selected parts and hand-built approach combine to make an extremely versatile instrument. Pl...
Front panel functions 1. Input jack- high impedance input to the amplifier. Plug in your instrument here. There are 2 rows of controls. The top row affects only the clean channel. The bottom row is identical to the top row. The bottom row affects only the lead channel. 2/9. Treble control- adjusts t...
7/14 reverb- mixes- the dry signal with a high quality spring-type reverberation effect. This effect is defeated with the control in the full counter-clockwise position. The reverb levels are completely independent. 8/15. Presence control- adjusts the contour of high-frequency response. The high-fre...
Rear panel functions 1. A/c input- connects the amplifier to a/c power via the power cord supplied. Unless otherwise specified, your amplifier is designed to operate on 120 volts a/c, 60 cycles. 2. Fuse- 3 ag type, slow blow fuse. Refer to the legend below the fuse holder for the proper fuse rating ...
Foot switch tube complement v1- 12ax7, rhythm channel v2- 12ax7, lead channel v3- 5751/12at7, reverb driver v4- 12ax7, reverb / effects v5- 12ax7, phase inverter v6, v7- 7581, output each fine production tube is tested and matched to our exacting specifications. Individual bias controls are provided...
K&m analog designs amplifiers are brought to you by bill krinard and joe mloganoski. We know your new two-rock amplifier will provide many hours of enjoyment and inspiration in the years to come. This manual is a resource for some of your questions. Please contact us with any other questions or comm...
This is a product of k & m analog designs 7880 old redwood highway cotati, ca 94931 serial number:___________.
