User manual ddm digital delay module for csa 400 d, qsa 200 d, qsa 500 d.
0.) preface thank you for using a k.M.E. Product. Inside this manual you will find useful information for having a long and safe work with your equipment. Please take enough time reading this manual to get in touch with all technical details of your new product. Your k.M.E. Dealer and the k.M.E. Tec...
Hardware overview 1 – lcd display showing delay time / delay unit 2 – minus key – decreases delay time by one unit 3 – plus key – increases delay time by one unit 4 – unit selector switch (meters / milliseconds / feet) 5 – functional mode switch (internal / external) 6 – test tone switch (on / off) ...
2.) operation a) audio signal connection [7], [8] to be able to use delay functionality you have to use the audio input on the ddm [7]. The line out on the speaker system leads the audio signal reproduced by the internal speakers for connecting equipment like self- powered bass systems. The line out...
C) unit selector switch [4] the ddm will calculate the correct delay time for you by just entering the acoustical distance in meters or feet. Bring the switch to the position you want to use. The ddm asks you ‘change unit?’ – if you really want to change the unit you have to press both keys (+ and -...
Example: main pa system could be a k.M.E. Ca 6, both top units csa 400 d are equipped with ddm modules. Both modules are switched to ‘external’ operation mode in the delay speaker positions work two additional k.M.E. Csa 400 d you will need the following cable connections: • 1 balanced audio line (x...
Klingenthaler musikelektronik gmbh auerbacher straße 268 08248 klingenthal / germany phone +49 (0)37467 - 558-0 fax +49 (0)37467 - 558-33 www.Kme-sound.Com service@kme-sound.Com technical state february 2005. The content corresponds to the state at printing. Subject to technical alterations. Misprin...
