K&N Engineering Typhoon 69-2520 Installation Instructions

A

B

A

C

E

D

O

M

G

H

I

F

P

J

K

L

INSTALLATION INSTRUCTIONS

69-2520

TO START:

1. Turn the ignition OFF and disconnect the

vehicle's negative battery cable.

2. Remove the air temperature sensor from

the stock intake tube as shown

3. Remove the wire loom from retaining clips

as shown.

4. Loosen and remove the five airbox retaining

bolts then remove airbox lid as shown.

5. Remove the stock air filter.

6. Pull up and remove the fresh air intake from

fender well.

7. Remove the four throttle body retaining bolts

from airbox. These bolts will be re-used. 

8. Remove the crankcase vent hose from airbox as

shown.

9. Remove the bolt and nut that secure the the

airbox to the vehicle. Bolt will be re-used. 

10. Remove the airbox from the vehicle. 

11. Jack the driver’s side of the vehicle up and

support with jack stands then remove the tire. 

12. Using the supplied T-20 wrench, remove

the two screws that retain the inner fender

valance to the fender.

13. Remove the two push pins that retain the

inner fender valance and move out of the way.

14. Remove the two bolts that retain the resonator

to the fender well then remove the resonator.

Dodge

2000-05 Neon

L4-2.0L

Tools

Flat Blade Screwdriver

Phillips Screwdriver

Ratchet

10mm Socket

13mm Socket

Description

Qty.

P/N

A

HOSE CLAMP #44

2

08560

B

HOSE; 2-1/2"ID X 2"L, STRAIGHT, BLACK

1

08441

C

BRACKET; "F" THROTTLE

1

070063

D

BRACKET; "F" RADIATOR

1

070062

E

GROMMET; ATS

1

08167

F

TUBE; 69-2520, POLISH

1

27131TP

G

VIBRATION GROMMET

1

082002

H

WASHER; 8MM FLAT, SS

1

08272

I

NUT; 6MM NYLOCK, SS

1

07512

J

HOSE CLAMP #40

1

08554

K

FILTERCHARGER

1

KRU4950E

L

DRYCHARGER (BLACK)

1

971001DK

M

WRENCH; T20 TORX

1

69801

O

EDGE TRIM

1

102455

P

HOSE; 10MM X 22"L, BLACK SILICONE

1

084060

Parts list

WARNING: Please follow directions carefully.  The K&N

Drycharger, included, must be installed on the K&N air filter

in all K&N Typhoon Cold-Air intake kits.  The K&N Typhoon

Intake System is a performance product that can be used

safely during normal, ambient weather conditions.  During

harsh and inclement weather conditions, you must convert

your Complete Cold Air Intake System to a Short-Ram con-

figuration, or return your intake to the stock OEM airbox

and intake tract configuration.  Failure to follow these

instructions can void your warranty.

Chrysler

2000-05 Neon

L4-2.0L