K-po k-100 instruction manual.
1、introduction thank you for choosing the k-po k-100 mini cb radio. The k-po k-100 is a small and easy to use cb radio with an excellent performance. Please read this manual carefully before installing or using the radio. 2、installation instructions check all materials before installation. The k-po ...
3、control panel function front view no name short press function long press function ① microphone socket ② a/f am/fm mode switch scan function ③ lcd display ④ power on/off volume.
4、operation 4.1 power on/off the radio 1. Turn vol switch clockwise to power on the radio. 2. Turn vol switch counterclockwise, until it clicks. The radio is now switched off. 4.2 volume control turn clockwise to increase volume, turn counterclockwise to decrease volume. 4.3 channel selection 1. Sho...
The channel. 2. Hold microphone button 【up 】/【down】 to change channels fast..
4.4 squelch level control 1. Shortly press the【sq】key, until the lcd display shows shortly sq and then x.X. X.X stands for the sq level. 0.F sq off 0.1 lowest sq level … … 2.8 highest sq level 2. Press microphone button【up】/【down】shortly to change sq level. 3. Hold microphone button【up】/【down】to cha...
2. Shortly press microphone button【up】/【down】to change the asq level. 3. Hold microphone button【up】/【down】to change the asq level fast. 4. Hold the【sq】key or wait for 3 seconds to safe the settings and exit the menu. 4.6 modulation type shortly press the【a/f】key to switch between am/fm mode. The lcd...
3. Shortly press【emg】key for the third time to return to last used channel..
4.9 key lock 1. Hold the【emg】key for over 2 seconds to lock the keys, lcd display shows ‘lc’. 2. Hold【emg】for over 2 seconds again to unlock the keys, lcd display shows ‘of’. 4.10 scan function 1. Hold the 【a/f】key to start the scan function, the lcd display shows ‘sc’. 2. Press microphone button【up...
Uk 40 fm 27.60125-27.99125mhz pl 40 fm / 40 am 26.960-27.400mhz i2 34 fm / 34 am 26.965-26.865mhz de 40 fm / 40 am 26.965-27.405mhz 80 fm 26.565-26.955mhz in 27 fm / 27 am 26.965-27.275mhz 4.12 restore factory default 1. Hold【sq】key while powering the radio on, until the lcd display shows ‘rt’. 2. A...
Am modulation index: 80%-90% rx sensitivity: 0.25uv@12db.
