K40 RL200di Owner's Manual - Laser Settings
6
Laser Settings
The Laser Defuser can be configured to one of three different
operational settings:
Alerts from Non-Police Signals
Your K40 system is sensitive enough to detect signals generated by
non-police equipment, such as automatic doors. To learn how to
minimize these signals, please read about SENSITIVITY options (page
7), Quiet Ride function (page 8), and Mark to Mute (page 9).
K-Band Filter
Your K40 system rejects alerts from vehicles on the road (including
your own) equipped with radar-based safety features, such as colli-
sion avoidance. Police radar reception and detection range is
unaffected by this feature.
Traffic Sensor Filter
Your K40 system will reject alerts from traffic flow sensors usually
encountered during highway driving. Enable this filter through the
menu (pages 11-13).
Constant
Upon receiving a laser signal, the
Transmit
Laser Defuser will continuously trans-
mit a jamming signal for the duration
of the laser encounter. This is the
factory default setting.
Pulse Transmit
Upon receiving a laser signal, the
Laser Defuser will transmit a jamming
signal for 5 seconds and then cease
firing for the duration of that encounter.
Receive Only
The Laser Defuser will only detect laser.
No jamming signal will be emitted.
•
Gives the driver more time to decelerate.
•
Higher potential for jamming all the
way to the laser gun location.
•
Gives you time to reduce speed. Officer
will then be able to obtain speed to
eliminate the suspicion of “jamming”.
•
For notification only. Officer will immedi-
ately obtain a speed reading on your
vehicle in this setting.
Laser Settings
Description
Recommended Use