K40 RL200i Owner's Manual - Radar Alert Sequence
5
The K40 RL360i / RL200i provides a combination of audio and visual
alerts to warn you when radar is detected.
Radar Alert Sequence
Your K40 RL360i / RL200i detects all North American police radar
bands (X, K, and Ka-Band). When a signal is detected:
•
A voice alerts which band was identified. (This assumes the factory
default “Voice On” setting has not been changed.)
•
The K40 RL360i will announce the direction of the signal’s source,
either front or rear, along with the band detected. K40 RL200i
systems will only announce the band detected.
•
Signal strength and proximity to the radar source will be identified
as a series of Geiger counter-like tones. The faster the tone pattern,
the closer you are to the source. Each band has its own distinctive
tone.
Laser Alert Sequence
(only for K40 RL360i / RL200i systems that include the Laser Defuser g5)
When the K40 RL360i / RL200i detects a laser signal:
•
A voice announces, “Laser.” (This assumes the factory default
“Voice On” setting has not been changed.)
•
You will then hear a distinct and urgent audio tone.
•
LED(s) will pulse rapidly.