K9 Lights PUP 25° User Manual - Introduction

 K9

 lights 

1 

Introduction 

Thank you for purchasing a K9 “Pup”. Please read these instructions carefully before 

using or operating the fixture to avoid any possible damage or accidents. 

  Product introduction 

The K9 Pup is an LED PAR 46 fixture with an aluminum shell.  The Pup uses high 

power R, G, B LED color mixing to create a smooth, bright field of light.    The Pup provides 

long life and low power consumption with in a lightweight frame.  The built-in program 

includes dimmer presets, dimming, strobe, slave functionality and DMX addressing.     

  Packing list 

  K9 Pup PAR46 light         

  DMX Signal line     

 Manual 

Safety Information 

● Speak with a skilled professional before any repair. 

● Disconnect from the power source before setting up or moving. 

● Avoid direct eye exposure to the fixture when it is on.

● Make sure the power supply voltage is consistent with this light, rated at 110v/60hz 

●This light is designed for indoor use. Working temperature should be lower than 100°F.   

●The fixtures may be mounted in any position provided there is adequate room for 

ventilation. Make sure there are no flammable or explosive items with 2 feet of fixture.   

●Grounding is important for proper fixture operation. 

● If your Pup is in a continuous use environment with atmospheric particulates like fog, 

smoke or dirt, be sure to inspect and clean the fan with compressed air as necessary.