Kaba 52 Operating Instructions Manual

52 SERIES

M

ODELS

 52 & T52

O

PERATING

  I

NSTRUCTIONS

The following instructions cover Model 52 & T52 lock operations. The lock models

operate the same except for an additional feature that is found in the Model T52 that

allows you to program a time delay for lock opening and an opening window for the lock.

After entering the proper combination(s) for the lock, the bolt cannot be retracted until the

time delay has expired. Once the delay has expired, the bolt must be retracted within the

opening window.

SUPER MASTER CONTROL

The Super Master Combination is a six-digit combination used to reset the lock to the

factory default combination (50 25 50) in the event the user combination(s) are lost. See

the Super Master Operations sheet (P/N 3001.032).

LOCK MODES

A maximum of two users can exist in a lock. A lock can operate in either Single Mode or

Dual Custody Mode.

Note:

For a UL listed installation, only one user can be activated.

•   Single Mode  

E

Single Mode defaults to having only a Manager User (User 1) in the lock. A second

user (User 2) can then be added by the Manager User (User 1).  (See section on

Manager User Operations.)

In Single Mode only one valid user combination is required to open the lock - the Manager

User (User 1) combination or the User 2 combination.

Note: Default lock status from the factory is Single Mode with an opening

combination of “50 25 50” for the Manager User (User 1).

•

   Dual Custody Mode  

E

E

Dual Custody Mode defaults to two users in the lock - User 1 and User 2.

Two user combinations are required to open the lock - the User 1 combination and the

User 2 combination.

Note: Manager User Operations are not available in Dual Custody Mode.