Summary of E-Flash EF680
Page 1
E-flash ef680/ef780 installation guide ef680/ef780 - single lock ef680/ef780 - security double lock.
Page 2
Ef680/ef780 installation guide index 1. Preparation of the door 2. Fit mortice lock 3. Front installation - external 4. Handle position 5. Preparation of front of lock 6. Fitting of the front of the lock 7. Installation of the internal mounting plate 8. Fitting the main body of the lock 9. Connectin...
Page 3: Step 1
Ef680/ef780 installation guide preparation of the door prepare the door according to the template provided. Door thickness: 32mm to 67mm. Step 1 typical door preparation, ready for installation. Drill holes from both sides to prevent damage to the door 60mm backset 60mm backset door thickness range ...
Page 4: Step 2
Ef680/ef780 installation guide fit mortice lock before fitting the lock ensure the bevelled latch is handed correctly by rotating latch 180 degrees in either direction (ensure the face plate is not fitted at this time). • when fitting the mortice lock, feed the cable through to the internal side of ...
Page 5: Step 3
Ef680/ef780 installation guide front installation - external guide screw hole step 3 insert spindle into mortice along with spring. Note: it is not necessary to drill both guide screw holes, only one is required to suit the direction of the handle. Right handed guide screw hole left handed guide scr...
Page 6: Step 4
Ef680/ef780 installation guide handle position step 4 the levers on both external and internal are not handed from factory. • to set, insert a small screw driver as illustrated and depress retaining plate. • the handle can be configured either in left hand or right hand by rotating in either directi...
Page 7: Step 5
Once decided as to which way the door handle is to be placed • turn lock over and insert the guide screw in the necessary position (as per step 3). • you may need to use a flat head screw driver to tighten the guide screw. Note: this guide screw is critical to the alignment of the mortice lock and f...
Page 8: Step 6
Ef680/ef780 installation guide fitting of the front of the lock step 6 top of lock line up all the guide screws and the spindle with the spring and slide the body into place, gently feeding the cable through the hole in the door – making sure that the front main body fits flush against the door. Sho...
Page 9: Step 7A
Ef680/ef780 installation guide installation of the internal mounting plate step 7a check to make sure that the cable from the front of the lock and the cable from the mortice lock is clear and free. Carefully feed both the main pcb cable and power cable through the internal mounting plate. With the ...
Page 10: Step 7B
Ef680/ef780 installation guide installation of the internal mounting plate step 7b this product is supplied with a selection of 3 different length fixing screws for varying door thicknesses - 15mm, 25mm and 40mm. Select 4 x equal length screws according to the door thickness and secure, ensuring the...
Page 11: Step 8
Ef680/ef780 installation guide fitting the main body of the lock step 8 double locking model only. If fitting a single locking model please go to step 9. Prior to placing the main body to the backing plate make sure that the clutch is pushed down and not out as shown in picture a. Picture b is the c...
Page 12: Step 9
Ef680/ef780 installation guide connecting the cables step 9 connect the main pcb cable and small power cable making sure that they are connected securely. The mortice cable can be fed back slightly into the door cavity to shorten the cable to make it easier to fit the back main body of the lock. Not...
Page 13: Step 10
Ef680/ef780 installation guide fitting the back main body step 10 ease the main body onto the back fitting plate – holding it firmly, use the four m4 x 8mm pan head small silver screws & secure the internal body to the mounting plate..
Page 14: Step 11
Ef680/ef780 installation guide completion and testing. Step 11 insert the four batteries that are supplied with the lock - message received is: moving into kaba digital world, secure & convenient life, standard access mode. Once you have received this message you should hear the clutch engage - this...
Page 15
Ef680/ef780 installation guide notes.
Page 16
Kaba australia pty limited tel: 1300 728 088 fax: 1300 728 708 info@kaba.Com.Au www.Kaba.Com.Au kaba new zealand limited tel: 09 274 3341 fax: 09 274 3301 info@kaba.Co.Nz www.Kaba.Co.Nz.