Kaba E-Plex 2 Series Setup Manual

Summary of E-Plex 2 Series

  • Page 1

    2xxx/5xxx lock functions set-up guide.

  • Page 2

    Lock function options for e-plex 2xxx/5xxx series the e-plex 2xxx/5xxx mortise and thumbturn locks can be configured on-site to work in various lock functions, which are relevant to those defined by bhma (builders hardware manufacturers association). The options available in a given lock are determi...

  • Page 3

    Residence lock – a lock with the residence function stays in unlocked mode by default. It can be locked either from inside by throwing the deadbolt or from the outside by pressing the “#” key three times (###), followed by a valid user pin (personal identification number) which is the code [credenti...

  • Page 4

    • only the master user can perform this function. Step 1: ensure that the lock is in factory mode; if not, reset the lock as per instructions in the respective operations manual to hard reset the lock to factory default mode. Step 2: enter the lock programming mode using the factory master pin: #123...