Kaba EF 680D User Manual - How to Use
3-1 Register and change a p
in code
3
How to use
14
Open the battery
cover and press [M]
button
After pressing [M] button and
desired button is not pressed
within 7 seconds, setting will
not be completed.
1
Caution
For the products with remote
controller, the voice guide is
as follows : “If you want to
register p
assword press 1,
card key press 2, to delete all
card keys press 3, to delete
individual card key press 4,
registering a remote controller
press 8, deleting remote
controllers press 9 and other
registration press
hash [#]”
Note
Note
Press [1] to register a
password
2
Enter a p
in code on the
keypad
4-12 digits password can be
used.
A password cannot
consist of symbols
[*] and [#].
3
Caution
• When you finish the p
in code
registration, please check if a
door can be opened with the
p
in code.
• There is a risk of the door
being locked when registering
or changing a p
in code.
Please ensure the door is kept
open during the registration
process, or simply bring a
registered card key or an
emergency key with you.
Caution
• The p
in code is set default as
“1234567890”
• A p
in code can consist of 4-12
digits numbers excluding the
symbols [*] and [ # ].
(0000 ~ 0000000000)
• A new p
in code will replace an
existing p
in code.
• Even if a new p
in code is
registered, there will be no effect
on an existing registered card key.
Note
Voice guide
“If you want to register p
in code
press 1, card key press 2, to
delete all card keys press 3, to
delete individual card key press
4 and other registration press
hash [#]”
Voice guide
“Enter the p
in code you want to
register and press star”
Press [*] to finish the
registration
4
Voice guide
“Registration of password is
completed.”
An entered p
in code
will display on the
keypad in correct order.