Kaba LCLX Operating Instructions Manual

LOCK MODES

A maximum of two users can exist in a lock. A lock can operate in either Single Mode or

Dual Custody Mode.

Note:

For a UL listed installation, only one user can be activated.

•   Single Mode  

E

Single Mode defaults to having only a Manager User (User 1) in the lock. A second

user (User 2)can then be added by the Manager User (User 1). (See section on

Manager User Operations.)

In Single Mode only one valid user combination is required to open the lock - the Manager

User (User 1) combination or the User 2 combination.

Note:

Default lock status from the factory is Single Mode with an opening

combination of “50 25 50” for the Manager User (User 1).

•

   Dual Custody Mode  

E

E

Dual Custody Mode defaults to two users in the lock - User 1 and User 2.

Both user combinations are required to open the lock - the User 1 combination and the

User 2 combination.

Note:

Manager User Operations are not available in Dual Custody Mode.

LOCK OPERATING CONVENTIONS

•The LC Series lock models are battery powered (PowerSaver

TM

 Technology.)

•   To clear a combination or keystroke, press the 

¸

¸

¸

¸

¸

key.

•   If the bolt is not retracted within 4-6 seconds after a valid opening combination is

accepted, the lock will “relock”.

•   Slide Bolt (Auto Locking) Technology:  

Once a combination has been entered and

accepted, the lock bolt movement works in conjunction with the bolt works of the

container. When the bolt works are disengaged to open the container, the lock bolt will

slide into the “unlocked” or retracted position. Once the bolt works are extended to the

locked position, the lock bolt automatically slides into the “locked” position. The lock will

not open if force is applied to the end or side of the bolt.

                          LC SERIES

O

PERATING

 I

NSTRUCTIONS

M

ODELS

  LCLX,  LCMX, TLCL, TLCM

Document Number 3032.034  Rev. B - 03/05