KaiDeng WVC Modem User Manual - 2.3 Installation
of
10
http://www.kaidengdg.com
Power line/plug
Signal lamps
Power light
2. One RS232 serial connections
2.3 Installation
2.3.1 one WVC Modem(only one group) and the installation distance is
within 15M
When the micro inverters is less than or equal to 100pcs in generation system, we only need to install one WVC Modem.
The installation is very simple, just need using the serial port to connect the WVC Modem and computer, then plugged in
power. Of course, the first premise is your computer needs a serial port. And the details installation like below:
1.
Connect the serial port of the female contact of lunk to WVC Modem serial port and tighten the screw on both ends of
the connections, show likes below:
3