- DL manuals
- Kaindl
- Grinder
- BSG 60
- Instruction Manual
Kaindl BSG 60 Instruction Manual
Summary of BSG 60
Page 1
2 instruction manual drillgrinder bsg 60 kaindl -schleiftechnik reiling gmbh remchinger str. 4 75203 königsbach-stein tel. ++49-07232/4001-0 fax ++49-07232/4001-30 e-mail: info@kaindl.De http://www.Kaindl.De germany content.
Page 2
2 content gs inspection certificate 3 ec declaration of conformity 4 set up/start-up / safety advise 5 safety symbols 6 technical data 7 description of components 8 accessories 9 operation clamping and alingment of right hand spiral drill bits 10 grinding of a spiral drill 11 web thinning of spiral ...
Page 4: Ec Declaration of Conformity
4 ec declaration of conformity in sense of ec instruction for machines (98/37/ec the manufacturer: kaindl-schleiftechnik reiling gmbh remchingerstr. 4 75203 königsbach-stein germany declares that the machine described herein: drill grinder type bsg 60 refers to the security and health requirements o...
Page 5: Set Up
5 set up the machine is packed in a box placed on a pallet. Unpack the machine at the final working place. Before starting, please check the machine for transport damage. Environmental conditions for set up use the drillgrinder only in dry rooms. Environmental temperature: from + 5° to + 50° c humid...
Page 6
6 explanation of the utilized safety symbols in this manual, the following safety symbols are used. These symbols shall attract the attention of the reader to the text beneath. These symbols indicate to existing danger for live and health of persons. Eye protection during grinding against kicked aro...
Page 7: Technical Data
7 technical data 1. Dimensions lengh 570 mm depth 320 mm height 400 mm weight 52 kg range/basic version 3-40 mm Ø special accessory 40-60 mm Ø grinding wheel 200 x 40 x 51 mm Ø noise emission 2. Electrotechnical data standard version special version motor 400 v 230 v 110 v bauform imb 14 imb 14 imb ...
Page 8: Description of Components
8 description of components 1. Optical lens neon lighted (special accessory) 2. Grinding wheel protection 3. Support plate with fixation threats a1,a,b,c. 4. Main switch 5. Spray colling (special accessory) 6. Grinding wheel 7. Starknob locking screw 8. Clamping lever for eccentric clamping 9. Fixat...
Page 9
9 accessories support sleeve with cone mk1, mk2, mk3 diamond dresser support for diamond dresser depth stop with magnet prism 40-60 mm countersink sharpening device svr 31 optical lens nozzle for dust exhaust.
Page 10: Operation
10 operation for drills from 3-20 mm use the prism including the inner jaws. For drills from 20 – 40 mm remove the inner jaws. Removing of the inner jaws: loosen the 4 pcs socket head cap screws with a suitable key sw 2,5 mm mounting of the inner jaws: place the inner jaws inside the prism in the wa...
Page 11
11 grinding of right hand spiral drills adjust prism rest to 118 ° and support to scale value 0 (pic 21) for the clearance angle adjustment, open fixation screw and adjust with the eccentric locking screw to the value listed below. (pic 11). The smaller the scale number, the smaller the clearance an...
Page 12: Grinding of Left Hand Drills
12 grinding of left hand drills let project the drill outside the prism depending on diameter (same as for right hand drills). Align one cutting edge to the line (as shown on the picture pos. 1). For adjusting the correct clearance angle, remove the stepless clearance angle adjustment from boring 1 ...
Page 13: Cross- Or Facet Drills
13 cross- or facet drills main cutting edge: let the drill project outside the prism, depending on it’s diameter as writen on page 10 but align the cutting edge parallel to the straight marking line (see pic. 12 pos. 2) clearance angle adjustment (pic 15) to 0 and fix with star knob screw in hole a....
Page 14: Carbide - Stone Drills
14 carbide - stone drills only sharpen with diamond- or silicone grinding wheel. Let project the drill approx. 30 mm outside the prism. Align one cutting edge parallel to the straight graduation line. (pic.12 pos. 2). Prism support to 118° and base adjustment to 130°. Clearance angle to graduation 2...
Page 15: Grinding of Spot Facers
15 grinding of stepped drills with 2 cutting edges 118º first step. Adjust prism support to scale mark 118 °. The fixation and alignment is same as described in page 10 (right hand drills) second step. Adjustment as first step, and sharpen over the right edge at the straight angle of the grinding wh...
Page 16
16 grinding of cutters with 2 cutting edges fix the cutter and align one cutting edge parallel to the straight marking line (page 14 pic.12). For short cutters, fix another of same diameter in the backside of the prism. Grinding of the main cutting edge adjust prism support to 180 ° the base adjustm...
Page 17: Special Accessory
17 oes ing you º. Special accessory countersink sharpening device svr 31 for sharpening countersinks, you need as special accessory to the bsg 60 the countersink sharpening device svr 31. First fix the support plate in boring a. Then adjust the stepless clearance angle adjustment to no. 2. This gran...
Page 18: Alignment of The Countersink
18 alignment of the countersink svr 31 basic adjustment: cam for countersinks with 3 cutters and 10 mm collet + nut for cross countersinks you need a one step cam. (special accessory).The adjustment is made as shown on picture 30. (left pic. Is wrong and right is correct.) alignment of cross-counter...
Page 19: Change of The Cam
19 change of the cam in case you have to change the cam of your svr loosen the threated pin with an allen key sw 3,0 (see picture) place the svr 31 with the handwheel on a flat surface. By hand, press down the body (against spring tension). With your other hand, draw the cam beside the roller bearin...
Page 20: Mounting of Grinding Wheel
20 the picture shows the assembly of the grinding wheel with the grinding wheel support. (pic 37, item. 2 to 5). Pay attention that screw no. 4 has a right hand threat. Same also for special grinding wheel support as shown on picture 38 and 39. Hickness for grinding wheels of 20 mm t (pic 38 item 2)...
Page 21: Change of The Grinding Wheel
21 change of the grinding wheel for changing the wheel, disconnect from electric current. Take a 10 mm fork- or ring key and open both head cap screws (1+2) and take of the grinding wheel protection cover. Now loosen the hexagon socket screw with the supplied wrench sw 5. Turn the screw until you ca...
Page 22: Spare Part List
22 spare part list part no. Description 10594 inner jaws 3-20 mm 10598 prism 20-40 mm 10602 prism 40-60 mm 10624 diamond dresser complete 10625 spare gyroscopic dresser 10620 optical lens neon lighted 11042 spare neon lamp 10613 corundum grinding wheel 200x40x51 mm grit 60 (standard) 10614 corundum ...