Kaito KA600 Operation Manual - page 15
Ni-MH Batteries
AA Batteries
+
-
+
-
+
-
POWER SUPPLY
23
24
POWER SUPPLY
Ni-MH Battery
(1)Remove the battery compartment's cover by pushing
the cover in the direction of the arrow.
(2)Install the Ni-MH batteries in its compartment, and
then connect battery port with the unit.
(3)Rotate the
unit can work normally.
AA Batteries
Compartment
Note:The charging function of the unit is only used for the Ni-MH
batteries.
PM
AIR
FM
AM
WB
NOAA
ENABLE
DISABLE
ALL
MULTIPLE
SINGLE
COUNTY
VOICE
SIREN
Z
Z
Z
ALERT
%
DTE
+
-
+
-
+
-
Battery Port
(1)Open the battery compartment's cover.
(2)Install 3 AA size batteries according to the polarity
diagram.
(3)Rotate the
position, the unit can work normally.
NOTES:
(1)If you set the
the Ni-MH batteries, if you set the
position, the unit consume the AA batteries.
(2)Please don't mix the rechargeable batteries with the alkaline ones.
(3)Please don't mix the used batteries with the new ones.
(4)Please don't mix AA batteries with the metal.
(5)If you don' t use the unit for a long period, please remove the AA batteries
lest battery corrosion.
Low Battery Power Warning
When the battery power is low, the
will flash. In this condition, you can't turn on the unit.
If the warning displays, please select the other
charging mode or charge the unit immediately.