Kalamazoo Kalamazoo Operating Instructions Manual - Settings
Do as follows to open the settings menu:
First, open the door. Turn off the dishwasher using the main power switch (press and hold). Release
the button.
1.
Press and hold the main power switch until the display lights up.
2.
Within five seconds, press and hold the Program selector and the Long dry button.
3.
PROG
PROG
+
Release the buttons when the display shows
.
4.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again
if you fail to open the settings menu the first time.
Press to save the setting value and continue to the next
setting.
Current setting.
Current setting value.
Press to browse between setting values.
You can now adjust the following settings:
Description
Settings
Options
Button
press
You can activate the child lock (button lock)
option to prevent children from starting the
dishwasher.
Press the High temperature and Long dry but-
tons simultaneously to temporarily deactivate
the button lock when you want to start the
dishwasher. The button lock is automatically
reactivated after 2 minutes.
Child lock
(button lock)
(Off)
(On)
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings
menu.
The dishwasher uses a buzzer to indicate when
a program is finished or when a fault has oc-
curred.
Buzzer volume
(Off)
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
Customer Care Center
20
1-800-898-1879