- DL manuals
- KALATEL
- Musical Instrument
- CBR-KB3
- Installation And Operation Manual
KALATEL CBR-KB3 Installation And Operation Manual
Installation and Operation Manual
Revision B
0150-0133
CBR-KB3
and
CBR-KB3/J
Remote Keyboards
Installation and Operation
Manual
9
25
13
29
5
21
1
17
10
26
14
30
6
22
2
18
11
27
15
31
7
23
3
19
12
28
16
32
8
24
4
20
ALT
{ }
F
B
C
D
E
AUX2
AUX1
AUX3
AUX4
#
9
25
13
29
5
21
1
17
10
26
14
30
6
22
2
18
11
27
15
31
7
23
3
19
12
28
16
32
8
24
4
20
ALT
{ }
F
B
C
D
E
AUX2
AUX1
AUX3
AUX4
#
Summary of CBR-KB3
Page 1
Installation and operation manual revision b 0150-0133 cbr-kb3 and cbr-kb3/j remote keyboards installation and operation manual 9 25 13 29 5 21 1 17 10 26 14 30 6 22 2 18 11 27 15 31 7 23 3 19 12 28 16 32 8 24 4 20 alt { } f b c d e aux2 aux1 aux3 aux4 # 9 25 13 29 5 21 1 17 10 26 14 30 6 22 2 18 11...
Page 2
Installation and operation manual 0150-0133 ii revision b warning! To prevent fire and electric shock, do not expose this product to rain or moisture. The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerou...
Page 3
Installation and operation manual revision b iii 0150-0133 important information software and/or firmware is furnished to the purchaser under a license for use on a single system. Software and/or firmware included with this equipment are the sole proprietary property of, confidential to, and copyrig...
Page 4
Installation and operation manual 0150-0133 iv revision b this page intentionally left blank.
Page 5: Contents
Installation and operation manual revision b v 0150-0133 contents 1 i mportant s afeguards ....................................................................... 1-1 2 i nitial c onsiderations ........................................................................ 2-1 2.1 product description.........
Page 6
Installation and operation manual 0150-0133 vi revision b this page intentionally left blank.
Page 7: Mportant
Installation and operation manual revision b 1-1 0150-0133 1 i mportant s afeguards read instructions read all the safety and operating instructions before operating the unit. Retain instructions retain the safety and operating instructions for future reference. Heed warnings observe all the warning...
Page 8
Installation and operation manual 0150-0133 1-2 revision b ventilation openings in the enclosure, if any, are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. This unit should not be placed in a b...
Page 9
Installation and operation manual revision b 1-3 0150-0133 adjustments if the unit does not operate normally by following the operating instructions: • adjust only those controls that are covered by the operating instructions. • improper adjustment of other controls may result in damage, or void the...
Page 10
Installation and operation manual 0150-0133 1-4 revision b this page intentionally left blank.
Page 11: Nitial
Installation and operation manual revision b 2-1 0150-0133 2 i nitial c onsiderations 2.1 product description the cbr-kb3 series of remote keyboards are accessories for the calibur 10, and 16 channel range of multiplexers as well as the mmx (multiplexer / matrix) units and dvmr (digital video multip...
Page 12
Installation and operation manual 0150-0133 2-2 revision b this page intentionally left blank.
Page 13: Ontrols and
Installation and operation manual revision b 3-1 0150-0133 3 c ontrols and i ndicators 3.1 model cbr-kb3 keyboard 3.2 model cbr-kb3/j keyboard enter menu frame forward stop frame reverse fast forward search fast reverse zoom (optical) focus iris joystick unit select presets global auxilliary keys 1-...
Page 15: 3.5 The Alt Key
Installation and operation manual revision b 3-3 0150-0133 common controls alarm used to accept active alarms. Indicator: flashing led above key. Used to accept active alarms. Indicator: flashing led above key. In the telemetry mode, functions as the help key in the kalatel dome menu. Sequence start...
Page 16
Installation and operation manual 0150-0133 3-4 revision b 3.6 device-specific controls matrix/multiplexer controls note: these keys are used only with the matrix/multiplexer (mmx) units. Mon-c sets keys to act on mon-c (spot) only. Indicator: led above key. Mon-d sets keys to act on mon-d (spot) on...
Page 17
Installation and operation manual revision b 3-5 0150-0133 telemetry on / off. Must be on to use telemetry keys. Telemetry operates on selected camera only. Indicator: led above key. Aux 1 - 4, aux 5 - 8 control of receiver/driver relays and related functions. If shift is on, then becomes aux 5-8. I...
Page 18
Installation and operation manual 0150-0133 3-6 revision b the aux 1 key this feature is used for commanding the cyberdome to activate tour number one. Each time the key is pressed tour number one will start, regardless of the aux 1 led status, or previous setting. The led indicator does not indicat...
Page 19: Iring and
Installation and operation manual revision b 4-1 0150-0133 4 w iring and c onnections the following diagram shows the wiring configuration when connected to kalatel telemetry equipment. A calibur probridge is required when connected to selected other manufacturers equipment, wiring and operation for...
Page 20
Installation and operation manual 0150-0133 4-2 revision b digiplex applications rj-45 connectors 12vdc power adapter kalatel mini-dome 12vdc power adapter 24vac power adapter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 rs-232 1 rs-485 2 12v dc b 2-wire twisted unshielded blk red to other calibur rs-485 ...
Page 21: 4.2 Start-Up
Installation and operation manual revision b 4-3 0150-0133 4.2 start-up supply power to the cbr-kb3 using the 110-240 vac to 12 vdc adapter. Test the operation of the cbr-kb3 to verify the integrity of the connections and that it operates in a correct manner as follows (for front panel controls, ref...
Page 22: 4.4 The Rs-422 Network
Installation and operation manual 0150-0133 4-4 revision b 4.3.2 rs-485 network connector wiring rs-485 connections front view of keyboard input jacks pin 1 or 7: gnd (shield) pin 3: +ve pin 6: -ve the remaining pins are not used. 1 2 3 4 5 6 7 8 table 4-2. Rs-485 connections. 4.4 the rs-422 network...
Page 23: Eyboard
Installation and operation manual revision b 5-1 0150-0133 5 k eyboard o perations initial power-up when power is applied to the keyboard, a self-test lights all the leds and a distinctive power-on buzzer sound is emitted. The cbr-kb3 briefly displays the software version number on the keyboard lcd ...
Page 24
Installation and operation manual 0150-0133 5-2 revision b to connect to a new multiplexer unit, the keyboard has to be in the standing by ... State. Some examples: suppose the user wants to connect to unit 5. When the connection is successful, the steps are: 1. Press the # key once. The display sho...
Page 25
Installation and operation manual revision b 5-3 0150-0133 if no controllable devices (multiplexers) are found on the network, but does see another keypad or pc, the display shows: no units connected, and the keyboard goes to the standing by ... State. When polling sees nothing on the network when a...
Page 26: 5.3 Network Interfacing
Installation and operation manual 0150-0133 5-4 revision b the keyboard-multiplexer link may be idle for many reasons. For example, the rs-485 communication link may have been broken, the controlling keyboard may have lost power or be malfunctioning, or the operator may have forgotten to disconnect ...
Page 27
Installation and operation manual revision b 5-5 0150-0133 if the chosen address is available for use, the display shows: (where nn is the chosen address) keyboard's id set to nn, the bottom line of the display is updated to show the new keyboard address. If the address is already in use, the displa...
Page 28
Installation and operation manual 0150-0133 5-6 revision b the keyboard lcd display shows: monitor mode multiplexer id ? 1. Enter the multiplexer id number for the multiplexer whose monitors are to be controlled. The keyboard lcd display shows: (_ _ is the multiplexer id number) multiplexer (_ _) th...
Page 29
Installation and operation manual revision b 5-7 0150-0133 testing the preset test the correct operation of the preset by moving the camera to a completely different view, and then commanding the camera to return to the preset as follows: 1. Press the preset key on the keyboard one time. The keyboar...
Page 30
Installation and operation manual 0150-0133 5-8 revision b p/t/z addressing requirements all camera inputs (whether fixed cameras or p/t/z units) are connected to a multiplexer input. The multiplexer has an rs-485 network address, and so does the pan/tilt camera receiver. This address determines whe...
Page 31
Installation and operation manual revision b 5-9 0150-0133 --next --number 01 --number 06 --previous --number 02 --number 07 --set --number 03 --number 08 --help --number 04 --number 09 --number 05 --number 00 ® - ¬ all other kb3 keys when pressed, will display this message on the lcd: not a valid k...
Page 32
Installation and operation manual 0150-0133 5-10 revision b note: please refer to kalatel cyberdome programming instructions (kalatel document #: a06-8s4c-a) for more detailed instructions on programming the cyberdome. Exiting the kalatel cyberdome programming menu 1. Press the menu key once. The kb...
Page 33: Pecifications
Installation and operation manual revision b 6-1 0150-0133 6 s pecifications physical housing metal enclosure with integral stand for desktop use. Rack mountable with optional kit (see options below). Dimensions d x h x w: 5 x 2 x 13.5 in (127 x 51 x 343 mm) weight 2.8 lb. (1.3 kg) nominal for keybo...
Page 34
Installation and operation manual 0150-0133 6-2 revision b model numbers description cbr-kb3(x) desktop remote keyboard with ac external power supply and pushbutton telemetry control. Cbr-kb3/j(x) desktop remote keyboard with external power supply and variable speed joystick telemetry control. Optio...
Page 35: Ervice and
Installation and operation manual revision b 7-1 0150-0133 7 s ervice and w arranty user maintenance user maintenance of this unit is limited to external cleaning and inspection. Clean only with a clean cloth, dampened slightly with water. Do not use any other agent to clean the unit. Ensure that po...
Page 36
Installation and operation manual 0150-0133 7-2 revision b warranty kalatel warrants that the products, when delivered, properly installed, and used in accordance with kalatel’s instructions, will conform in all material respects to published specifications for the products in effect as of the date ...
Page 37
Installation and operation manual revision b 7-3 0150-0133.
Page 38
Installation and operation manual 0150-0133 7-4 revision b kalatel p. O. Box 3004 corvallis, or 97339 united states of america telephone: (800) 343-3358 (7:00 am to 4:30 pm , pacific time) in oregon: (541) 754-9133 facsimile: (541) 754-7162 (24 hours a day).