Kalley K-LED32HDZT2 Service Manual - 1.2 Notes

- 7 -

(7) Do not pull out or insert the power cable from/to an outlet with wet hands. It may 

cause electric shock. 

(8) Do not damage or modify the power cable. It may cause fire or electric shock. 

(9) If the power cable is damaged, or if the connector is loose, do not use the product: 

otherwise, this can lead to fire or electric shock. 

(10) If the power connector or the connector of the power cable becomes dirty or 

dusty, wipe it with a dry cloth. Otherwise, this can lead to fire. 

(11) Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid injury from tip-over. 

1.2 Notes 

Notes on Safe Handling of the LCD panel and during service 

The work procedures shown with the Note indication are important for ensuring the 

safety of the product and the servicing work. Be sure to follow these instructions. 

• Before starting the work, secure a sufficient working space.

• At all times other than when adjusting and checking the product, be sure to turn OFF

the POWER Button and disconnect the power cable from the power source of the TV 

during servicing. 

• To prevent electric shock and breakage of PC board, start the servicing work at least

30 seconds after the main power has been turned off. Especially when installing and