Kalley K-LED39FHDN User Manual - Advanced Functions

Advanced Functions

9

Adjusting the Sound

Display the menu by pressing the Menu button. Press 

the left or right direction button to select the Sound icon 

and press the

 or down direction or OK button to display

 up

the Sound menu. The Sound options are as below: 

Sound Mode: use the

direction or OK 

 right

 button 

to 

display the selectable options,  then press the up or down 

direction button to scroll 

through the sound preset settings: 

Stereo, Music, News, Movie and Personal.

Balance: use the 

 direction button to balance 

left or right

the sound between the left and right speakers.

Smart Volume: turns on this option to keep the same 

sound level for all channels. 

Scene: use the

direction or OK 

 right

button to display the 

selectable options, then press the up or down direction 

button to scroll 

 the scene preset setting: DeskTop,

through

HangUp.

Sound EQ: adjusts the audio frequency settings. Select 

the Sound EQ option, then press the right direction or OK

button to enter, then press the up or down direction button

to select an option and press the left or right direction  

button to adjust. 

   Note: If the Sound EQ is adjusted, the Sound Mode will

   automatically switch to Personal. 

: 

Color Temp: adjusts the color temperature of the picture. 

Use the

direction or OK 

through 

.

Natural Light : turns on this option to adjust the 

brightness of the backlight according to the content of the 

inputted signal automatically, so as to optimize the picture 

quality and decrease the power consumption. 

: turns on this option to adjust the

contrast automatically. 

Tint adjusts the balance between the red and green 

levels.

button to display the 

selectable options, then press the up or down direction 

button to scroll 

the color settings: Cool for a 

more blue palette of picture colors; Normal; and Warm 

for a more red palette of picture colors

Dynamic Contrast

 right

Press Menu to return or Exit to close the menu.

Smart Switch

: press the left or right direction button

to select a desired setting: Switch, Display and Off.

    Switch: if an equipment, e.g. a DVD player, has been 

    connected to the sockets on the TV set and turned on, 

    e.g. AV1 sockets, the TV set will switch to that signal 

    source automatically (AV1 for this example). 

: if an equipment, e.g. a DVD player, has been 

Display

    connected to the sockets on the TV set and turned on, 

    e.g. AV1 sockets, the TV set will display a prompt 

    message on the screen. You can select OK to switch to 

    that signal source (AV1 for  this example) or Cancel to 

    ignore the prompt.

    Off: disables the Smart Switch function.

    Note:  For HDMI source, the smart switch function is 

    available only when using a HDMI cable to connect the 

    equipment which turned on. And the smart switch function

    is not available for AV2 source, because AV2 shares video

    (Y/VIDEO) and audio sockets with YPBPR.

Function Settings

Display the menu by pressing the Menu button. Press the

left or right direction button to select the Setting icon 

and press the up or down direction or OK button to display

the Setting menu. The Setting options are as below: 

Note: Some options may be not available for certain 

signal sources.

Note: Tint is available to be adjusted only when the 

system of the video signal is NTSC.

MTS: 

 left or right

Press Menu to return or Exit to close the menu.

use the

direction 

available MTS settings: Stereo, Mono or SAP in TV mode.

button to select the 

DNR (Dynamic Noise Reduction) : Improves the quality 

of the picture in the case of poor reception. Press the left 

or right direction button to toggle among Middle, High, 

Low and Off.

Light Sensor: press the left or right direction button to

select On or Off. When On is selected, the unit is in power 

saving mode and can automatically adjust the backlight 

according to the intensity of ambient light, the Back Light

option in Picture menu is not adjustable, the Natural Light 

in Picture menu is automatically set to Off and not 

adjustable. When Off is selected, the Back Light and 

Natural Light options in Picture menu will restore to the 

user's setting.

Sound

Stereo

0

DeskTop 

On

Mono

Sound Mode

Balance

Scene

Sound EQ

Smart Volume

MTS

Setting

DNR

Light Sensor

Smart Switch

Startup Setting

Language

Color System

Watch Time Limit

Time Setting 

Restore to Default

Middle

Off

Off

Default

English

Auto

CC Mode

CC Option

CC OFF

CC1