KAM DMX Star Cluster 3D Instruction Manual

Page of 4

Download

Bookmark us

www.kam.co.uk

ue to continuous product development, specifications and appearance are subject to change.

If this product is ever no longer functional please it take to a recycling plant for environmentally friendly disposal.

I N S T R U C T I O N

M A N U A L

DMX Star Cluster 3D

Three dimensional DMX laser effect

The ultimate Star Cluster! 3D version of the best selling laser effect

Multiple 100mW red and 40mW green laser points

Three dimensional laser effect to create endless show creation possibilities

Built-in high speed stepping motor

High-efficiency optical system

Sound-to-light sensitivity control with animated patterns

5 channel DMX operation / XLR DMX in and out

10 point dip switches

Tough all metal chassis with adjustable hanging bracket

Key operated power control

Rated voltage: 220-240V AC / Rated frequency: 50/60Hz

Laser wavelength: 100mW/650nm | 400mW/532nm

M A N U A L

R E V I S I O N

1 . 0

Page 1
Www.Kam.Co.Uk d ue to continuous product development, specifications and appearance are subject to change. If this product is ever no longer functional please it take to a recycling plant for environmentally friendly disposal. I n s t r u c t i o n m a n u a l dmx star cluster 3d three dimensional d...
Page 2: Kam Dmx Star Cluster 3D
Kam dmx star cluster 3d three dimensional dmx laser effect introduction thank you for purchasing the kam dmx star cluster 3d. To optimise the performance of this product, prior to use, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. ...
Page 3
Operating instructions rear panel functions 1. Mains on/off switch 2. Safety key switch 3. Mains fused iec power input (240v) 4. Led display 5. 10 point dip switches 6. Microphone pick up 7. Microphone sensitivity adjustment 8. Dmx input 9. Dmx output led display the laser has several built in modes...
Page 4
Dmx 512 modes 1. Whilst connected to an international standard dmx512 controller - 2. Set the 10th dip switch to the off position. 3. Set the 1st to 9th dip switches as per the laser’s original address (max: 255). 4. The machine has 5 controlling channels, its channels are distributed as listed belo...