KAM Gobolaser 550RB Instruction Manual - page 4
Operation
1. Plug the unit into a suitable mains power supply.
2. Turn the On/Off power switch to the ON position.
3. Ensure that the key is located in the safety key lock.
4. Ensure the safety key lock is turned to the ON position.
5. Select desired function mode using the selector switch (7).
6. If using Sound-to-Light mode, ensure that the sound sensitivity is turned up and a sound source is playing.
Sound mode / Auto mode
Using the selector switch on the rear panel, select the function mode required.
In the AUTO MODE position the unit will run through it’s built-in programs at a pre-determined program speed.
In the SOUND MODE position the unit will run through it’s built-in programs in sync with the beat of the music.
Adjust the Sound Sensitivity knob on the rear panel to increase or decrease the sound sensitivity of the unit.
Anti clockwise will reduce the sensitivity and clockwise will increase the sensitivity.
Product features
Red & blue burst grating shutter FX laser
Plug&Play operation
Automatic mode
Sound-to-Light mode
LED power indicator
Built-in microphone
Sound sensitivity adjustment
Adjustable metal hanging bracket
Robust metal chassis
Safety key On/Off lock
IEC mains input
Technical specifications
Laser power:
350mW blue laser@447nm / 200mW red laser@650nm
Scanner motor:
Micro stepper motor
Modes:
Sound-to-Light mode / Auto mode
Input power:
AC100~240V / 50~60Hz
Power consumption:
30W
Packing size LxWxH: 275x183x148mm
Weight:
2.3Kg
Class 3B laser. Visible or invisible radiation, avoid eye or skin exposure to direct or scattered radiation.
Please note this unit is designed for indoor use only